Your Digital Signage Partner
User’s Guide
SS-28K1
SS-40K1
SS-49K1
SS-50K1
SS-58K1
ME-65K1
SS-75K1
SM-28K1
SM-40K1
SM-49K1
SM-50K1
SM-58K1
MM-65K1
SWEDX Matrix Video Walls
Digital Signage Screens
SWEDX Direct
SWEDX offers a wide
range of LED-TVs and
digital signage products
and its accessories. For
more information please
visit
www.swedx.com
SWEDX Lamina
SWEDX V
INDEX Page
Introduction 4
Safety precaution 4
Basic operation 5
Contents 6
Inputs 6
Remote Control (FR4) 7
Remote Control Buttons (FR4) 8
Remote Control Buttons (FR) 9
Main Operations 10
Volume Control 10
OSD Menu Operations 10
OSD Menu Structure: 10
First Time Installation 11
Menu > Channel (ATV) 12
Menu > Picture Menu 13
Menu > Sound Menu 14
Menu > Time Menu 15
Menu > 16Settings Menu
USB Media Player 17
Supported Formats and Codecs 18
Wall mount assembly 19
Troubleshooting 20
Warranty and Service 21
How to get service 22
Limitation of liability 22
Design and specifications are subject to change without notice.
03
Introduction
Thank you for choosing SWEDX products.
Please read this manual thoroughly before
operating the product. Make sure the display was
not damaged in transit. Should the product be
damaged, please contact your dealer and do not
install it. Check that you have all the accessories
according to the model.
Safety precaution
• Do not place the product on unstable places,
from which it may fell off
• Do not expose the product to extreme
temperature and humid environment
• Avoid subjecting the product to direct sunlit or
other heat sources
• Do not put the product into any liquid
• Do not put anything inside the product, or
place water container on top of the it
• In thunder rainy days (especially with
lightening), please unplug the power and
antenna cables
• Do not step on the power cable, or tangle
them together
• Avoid overload of the exterior electric outlet
to prevent fire hazard of electric shock
• Clean the product with dry and soft fabric
• lf your product is broken, do not repair it by
yourself, but contact the maintenance
personnel
• lf the remote control is left unused for a
longtime, please take the batteries out and
store them in dry places
• Avoid dropping the remote control
• lf the product is installed for exhibition
purpose, please do not place the overheated
part on the ground or carpet to prevent
accident
• The apparatus shall not be exposed to
dripping or splashing and that no object filled
with liquids, such as vases, shall be placed
on the apparatus
• Where the MAINS plug or an appliance
coupler is used as a disconnect device, the
disconnect device shall remain readily
operable
• Battery shall not be exposed to excessive
heat such as sunshine, fire or the like
• Excessive sound pressure from earphones
and headphone can cause hearing loss
2. This device must accept any interference
received, including interference that may
cause undesired operation
Please disconnect the power cord if this
equipment will not be used for a long time.
Precautions When Displaying a Still Image
A still image may cause permanent damage to
the screen
• Do not display a still image on the screen for
more than 2 hours as it can cause screen
image retention. This image retention is also
known as "screen burn". To avoid such image
retention, reduce the degree of brightness
and contrast of the screen when displaying a
still image
• Watching the screen in 4:3 format for a long
period of time may leave traces of borders
displayed on the left, right and center of the
screen caused by the difference of light
emission on the screen. Playing a DVD or a
game console may cause a similar effect to
the screen. Damages caused by the above
effect are not covered by the Warranty.
• Displaying still images from Video games and
PC for longer than a certain period of time
may produce partial after-images. To prevent
this effect, reduce the ‘brightness’ and
‘contrast’ when displaying still images
WARNING
To prevent the spread of fire, keep candles or
other open flames away from this product at
all times
Please install the product at proper position, such
as wall or ceiling. Please install it under the
guidance of professional staff.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference
04
Basic operation
• Use AC 100-240V 50~60 Hz power outlet for
the product power supply
• lf the screen of the product is not on, please
press the power button on the remote control
or on the product
• lf you want to shut off the product temporary,
please press the power button on the remote
control or on the product
• lf you want to shut off the product completely,
please disconnect the power cable
• In Component and AV modes the product
will shut off if there is no signal input for 30
minutes
• ln PC-RGB and HDMI modes the product will
enter idle state if there is no signal input after
30 seconds
• ln Media Player 1/2 modes the product will
remain On if there is no signal input
• The setting and tuning of picture and sound
will be saved when the product is shut off,
which will be working in the pre-shut off state
when the product is turned on again
• lf PC signal source is used, please first set
the resolution of the PC display card as the
following modes:
For HDMI 1/2/3 (3840x2160 @ 60Hz)
For PC (1920 x 1080 @ 60Hz)
• lf there is progressive output of the signal
used by the user, signal source with
progressive output is recommended
Preparation
• Put the product on a stable surface
• Do not fix the product with others fixations than
those provided or suggested by the
manufacturer
• If you have a wall mount, check that it is
steady.
• Do not place any material on the product.
• Do not block or cover the ventilation
openings on the product
• The product must be plugged with a tension
source of 110-240 volts and 50~60 Hz
• Power cord and cables must be properly
routed and protected to prevent from
stepping on them
• Keep the power cord away from any heat
source. Possible fire hazard
Heating sources and humidity
• Keep the product dry and away from humidity
• Keep the product away from heat sources
Cleaning and maintenance
• Unplug the product before cleaning it. Do not
use solvents or liquids to clean the product
• Only clean the product with a soft and dry
fabric
• In case of troubleshooting, do not use spare
parts other than those suggested by the
manufacturer. Using inadequate spare parts
can lead to electric shocks, short-circuits fire
or others incidents. Please contact a
technical authorized by SWEDX
Departure in holidays
• Unplug the product during lightning storms or
when unused for long periods of time
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUC E THE RIS K OF ELE CTRIC S HOCK, D O NOT
REMOVE COVER( OR BACK ). REFE R SERVIC ING TO
QUALIF IED SERV ICE PER SONNEL
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
05
Contents
Included items:
Notice! / Information
AAA
AAA
2 x AAA Battery
Remote Control
Notice
LED Screen
AC Cable
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
AAA
equivalent type
AAA Battery
CAUTION
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the like
AAA
AAA Battery
Inputs
4. AV
Input for AV (Audio/Video) sources
5. On/OFF
Key to power the product On/Off
6. Remote Pairing
Key to pair the remote control with the product
7. POWER INPUT
Input for 100-240 V power 50~60Hz
8. ATV
Input for analog TV channels
9. MEDIA PLAYER 1
Input for USB Media Player 1/Firmware
upgrade
10. MEDIA PLAYER 2
Input for USB Media Player 2
11. HDMI1
Input for HDMI1 (Ver. 2.0). Supports maximum
resolution 3840x2160 @ 60 Hz
12. HDMI2 (ARC)
Input for HDMI2 (Ver. 2.0). Supports maximum
resolution 3840x2160 @ 60 Hz
HDMI2 supports ARC (Audio Return Channel)
13. HDMI3 / MHL
Input for HDMI3 (Ver. 2.0). Supports maximum
resolution 3840x2160 @ 60 Hz.
HDMI3 supports MHL (Mobile High-definition
Link)
14. COAXIAL
Output for digital audio signal (Coaxial)
1. PC
Input for PC (VGA) sources
2. PC AUDIO
Input for PC audio when PC (Personal
Computer) is connected
3. COMPONENT
Input for Component (YPBPR) sources.
Supports maximum resolution 1080p @ 60 Hz
*Component/YPBPR and AV shares the same
audio input
PC
AUDIO
PC
COMPONENT
AV
1 2 3 4
USB MEDIA PLAYER
ATV
8
1
9
10
2.4 GHz
REMOTE
ON/OFF
PAIRING
5
6
HDMI
2
1
2 / ARC 3 / MHL
13
POWER INPUT
AC 100-240 V ~ 50/60 Hz
7
COAXIAL
1411 12
06
Remote Control (FR4)
The remote control is based on both 2.4 GHz and
Infrared.
The remote control is equipped with LED
indicators. The RED indicator states that the
remote is in Infrared mode and the BLUE
indicator is for 2.4 GHz mode. Recent products
from SWEDX uses 2.4 GHz receivers.
The 2.4 GHz technology allows the remote to
control the TV without targeting it because the
receiver is built inside the TV. Each SWEDX TV
has a pre-configured remote control meaning that
if you have several SWEDX TVs then the remote
control for one of the TVs will function only with
that particular TV and not with the other TVs.
To switch between Infrared and 2.4 GHz mode
press and hold the
buttons for 5 seconds. The Red LED will flash 3
times and switch from the current mode to the
other one.
To pair the remote with the TV follow the steps
below
1. Connect the product (e.g screen) to
power outlet
2. Make sure that the remote is in 2.4 GHz
mode
3. Press and hold the
buttons on the remote control simultaneously for
about 5 seconds. The BLUE LED will flash 5
times indicating that the remote is now paired
with the TV.
Recent 2.4 GHz based products from SWEDX
are equipped with a pairing key in order to avoid
pairing more than one product when more than
one SWEDX products is close by. A On/Off key is
also available in recent SWEDX products.
If your product is equipped with paring key please
press and hold the paring key for 2 second when
the Blue LED light is flashing after pressing
On/Off Key
Pairing Key
PC
AUDIO
COPMONENT
PC
DS-K8-UHD-2
Design and specifications are subject to change without notice.
07
AV
IR LED
RS232 INRS232 OUT
ON/OFF
2.4GHz
REMOTE
PAIRING
POWER INPUT
AC 100-240 V ~ 50/60 Hz
Remote control buttons (FR4)
This remote control model is included in all models
except SS28K1 and SM28K1 models
1. On/Off button
2. Shortcut to HDMI1,2,3
3. Number buttons for
direct channel access
4. Display additional
information
5. Volume increase
6. Volume decrease
7. Picture freeze
8. RED
9. GREEN
10. Not applicable for this
product
11. Navigation button UP
12. Navigation/adjust button
LEFT
13. Navigation button
DOWN
14. Menu display. In OSD
sub-menu press to
access previous menu
15. Not applicable for this
product
16. Shortcut to Media Player
1,2
17. Aspect Ratio toggling
18. Start/Pause play
19. Stop play
20. Fast backward
21. Previous Title
22. Not applicable for this
product
23. Mute the built-in
speakers
24. Available sources
selection
25. Not applicable for this
product
26. Not applicable for this
product
27. Not applicable for this
product
28. Not applicable for this
product
29. Enter sleep mode in
certain chosen time
30. Blue
31. Yellow
32. Not applicable for this
product
33. Not applicable for this
product
34. Confirm/activate button
35. Navigation/adjust button
RIGHT
36. Exit the OSD
37. Not applicable for this
product
38. Shortcut to AV
39. Not applicable for this
product
40. Fast forward
41. Next Title
42. Not applicable for this
product
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Model: FR4
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
RF052B-V2
08
Loading...