Swan SR11020BLN, SR11020BN, SR11020CN, SR11020GN, SR11020LN Instruction manual
...
Retro Fridge
Freezer
Installation and User Guide
For model: SR11020 (all colours)
Swan Service Helpline
0845 610 4118
SR11020.indd 1 23/07/2014 08:10
Important Safeguards
• Do not connect your appliance
to the electricity supply until all
packing and transit protectors
have been removed.
• Leave to stand upright for at
least 4 hours before switching on
to allow compressor oil to settle
• This fridge/freezer must only be
used for its intended purpose i.e
the storing and freezing of edible
foodstuff.
• Do not dispose of the appliance
on a fire. Your appliance
contains non CFC/HFC natural
substances in the cooling system
and in the insulation, which are
potentially flammable if exposed
to fire. Therefore, take care not
to damage, the cooling circuit
or pipes of the appliance in
transportation and in use. In
case of damage do not expose
the appliance to fire or potential
ignition source and immediately
ventilate the room where the
appliance is situated.
• We suggest you contact your
local authority for disposal
information and facilities available.
• See installation section for
information on suitable location.
• On delivery, check to make
sure that the product is not
damaged and that all the parts
and accessories are in perfect
condition.
• Ensure that the plug remains
readily accessible. Do not use
multiple adaptor or extension
cables
.
• Failure to observe these
instructions may invalidate your
right to free service during the
guarantee period.
• Keep ventilation openings, in the
appliance enclosure or in the builtin structure, clear of obstruction.
WARNING: Keep ventilation
openings, in the appliance
enclosure or in the built-in
structure, clear of obstruction.
WARNING: Do not use
mechanical devices or other
22
SR11020.indd 2 23/07/2014 08:10
Important Safeguards
means to accelerate the
defrosting
process, other than those
recommended by the
manufacturer.
WARNING: Do not damage the
refrigerant circuit.
WARNING: Do not use electrical
appliances inside the food
storage compartments of the
appliance, unless they are of
the type recommended by the
manufacturer.
• We suggest you keep these
instructions in a safe place for
easy reference.
• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use
of the appliance by a person
responsible for their safety.
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
• The plug must be accessible
after the installation.
• Children should be supervised
to ensure that they do not play
with the appliance.
CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cutout,
this appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on and
off by the utility company
This appliance should only
be connected to an earthed,
switched mains socket. Do not
use an extension cord with this
appliance
• If the supply cord is damaged,
3
SR11020.indd 3 23/07/2014 08:10
Your Refrigerator
Thermostat & bulb
Service label
Refrigerator shelf
Refrigerator shelf
Wire wine rack
Drain hole
Vegetable drawer
Salad crisper
Freezer section
Freezer drawers
Dairy &
multipurpose
guards
Dairy &
multipurpose
guards
Dairy &
multipurpose
guards
CHANGING THE BULB
1. Turn off the refrigerator and disconnect the plug
from the outlet.
2. Using a Phillips screwdriver to remove the bulb lens
3. Remove the old bulb by turning it counterclockwise.
4. Replace a new bulb (10W) clockwise making sure
you have correctly positioned the bulb.
5. Replace the light cover in original location and click
to put in place.
6. Reconnect the refrigerator to the electrical outlet
and switch on.
4
SR11020.indd 4 23/07/2014 08:10
Loading...