Suunto EON Core Operation Manual
SUUNTO EON CORE
USER GUIDE
2017-11-05
Suunto EON Core
1. Safety................................................................................................................................................................4
2. Getting started...............................................................................................................................................7
2.1. Display states and views................................................................................................................. 7
2.2. Icons.....................................................................................................................................................7
2.3. Set up.................................................................................................................................................. 8
2.4. Product compatibility.......................................................................................................................8
2.5. Before you dive................................................................................................................................ 9
3. Features........................................................................................................................................................ 10
3.1. Alarms, warnings and
notifications............................................................................................. 10
3.2. Algorithm lock...................................................................................................................................11
3.3. Ascent rate....................................................................................................................................... 12
3.4. Battery................................................................................................................................................13
3.5. Bookmark..........................................................................................................................................13
3.6. Calendar clock.................................................................................................................................13
3.7. Compass............................................................................................................................................14
3.7.1. Calibrating compass............................................................................................................14
3.7.2. Setting declination..............................................................................................................15
3.7.3. Setting bearing lock............................................................................................................15
3.8. Customize dive modes with DM5.............................................................................................. 16
3.9. Decompression dives.................................................................................................................... 17
3.9.1. Last stop depth.....................................................................................................................19
3.10. Display brightness.........................................................................................................................19
3.11. Dive history.....................................................................................................................................20
3.12. Device info.....................................................................................................................................20
3.13. Dive modes....................................................................................................................................20
3.14. Dive planner....................................................................................................................................21
3.15. Flip display...................................................................................................................................... 21
3.16. Gas consumption......................................................................................................................... 22
3.17. Gas time.......................................................................................................................................... 22
3.18. Gas mixtures..................................................................................................................................23
3.19. Language and unit system.........................................................................................................24
3.20. Logbook.........................................................................................................................................24
3.21. Movescount mobile app.............................................................................................................24
3.22. Multi-gas diving............................................................................................................................25
3.22.1. Modifying gases during a dive..................................................................................... 25
3.22.2. Isobaric
counterdiusion (ICD)....................................................................................26
3.23. Personal and altitude adjustments......................................................................................... 27
3.24. Oxygen calculations...................................................................................................................28
3.25. Rebreather diving........................................................................................................................28
3.25.1. Closed-circuit gases........................................................................................................28
2
Suunto EON Core
3.25.2. Open-circuit gases......................................................................................................... 28
3.25.3. Setpoints........................................................................................................................... 29
3.25.4. Bailouts..............................................................................................................................30
3.26. Safety stops and deepstops.................................................................................................... 30
3.27. Sample rate.....................................................................................................................................31
3.28. Standby and deep sleep............................................................................................................ 31
3.29. Surface and
no-fly time...............................................................................................................31
3.30. Suunto DM5 and Movescount.................................................................................................32
3.30.1. Synchronizing logs and settings..................................................................................32
3.30.2. Updating firmware.......................................................................................................... 32
3.31. Suunto Fused RGBM................................................................................................................... 32
3.31.1. Diver safety.........................................................................................................................33
3.31.2. Altitude diving................................................................................................................... 33
3.31.3. Oxygen exposure.............................................................................................................34
3.32. Tank pressure...............................................................................................................................34
3.33. Timer...............................................................................................................................................35
3.34. Water contacts..............................................................................................................................35
4. Care and support....................................................................................................................................... 36
4.1. Handling guidelines....................................................................................................................... 36
4.2. Installing scratch guard................................................................................................................36
4.3. Changing strap to bungee...........................................................................................................37
4.4. Charging battery.............................................................................................................................37
4.5. Getting support...............................................................................................................................37
4.6. Disposal and recyling................................................................................................................... 38
5. Reference.....................................................................................................................................................39
5.1. Technical
specifications................................................................................................................ 39
5.2. Compliance...................................................................................................................................... 41
5.2.1. EU radio directive................................................................................................................41
5.2.2. EU Personal Protective Equipment ...............................................................................41
5.2.3. EU depth gauge standard................................................................................................41
5.2.4. FCC compliance.................................................................................................................42
5.2.5. IC............................................................................................................................................42
5.3. Trademark........................................................................................................................................42
5.4. Patent notice...................................................................................................................................42
5.5. International Limited Warranty...................................................................................................42
5.6. Copyright......................................................................................................................................... 43
5.7. Dive terms........................................................................................................................................ 44
3
Suunto EON Core
1. Safety
Types of safety precautions
WARNING: - is used in connection with a procedure or situation that may result in
serious injury or death.
CAUTION: - is used in connection with a procedure or situation that will result in
damage to the product.
NOTE: - is used to emphasize important information.
TIP: - is used for extra tips on how to utilize the features and functions of the device.
Before you dive
Make sure that you fully understand the use, displays and limitations of your dive instruments.
If you have any questions about this manual or dive computer, contact your Suunto dealer
before diving. Always remember that YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY!
This dive computer is intended for use with compressed air only.
Safety precautions
WARNING: ONLY TRAINED DIVERS SHOULD USE A DIVE COMPUTER! Insu cient
training for any kind of diving, including freediving, may cause a diver to commit errors, such
as incorrect use of gas mixtures or improper decompression, that may lead to serious injury
or death.
WARNING: You must read the printed quick guide and online user guide for your dive
computer. Failure to do so may lead to improper use, serious injury or death.
WARNING: THERE IS ALWAYS A RISK OF DECOMPRESSION SICKNESS (DCS) FOR ANY
DIVE PROFILE EVEN IF YOU FOLLOW THE DIVE PLAN PRESCRIBED BY DIVE TABLES OR A
DIVE COMPUTER. NO PROCEDURE, DIVE COMPUTER OR DIVE TABLE WILL PREVENT THE
POSSIBILITY OF DCS OR OXYGEN TOXICITY! An individual’s physiological makeup can vary
from day to day. The dive computer cannot account for these variations. You are strongly
advised to remain well within the exposure limits provided by the instrument to minimize the
risk of DCS. As an added measure of safety, you should consult a physician regarding your
fitness before diving.
WARNING: If you have a pacemaker, we recommend you do not scuba dive. Scuba
diving creates physical stresses on the body which may not be suitable for pacemakers.
WARNING: If you have a pacemaker, consult a doctor before using this device. The
inductive frequency used by the device may interfere with pacemakers.
4
Suunto EON Core
WARNING: Allergic reactions or skin irritations may occur when product is in contact with
skin, even though our products comply with industry standards. In such event, stop use
immediately and consult a doctor.
WARNING: Not for professional use! Suunto dive computers are intended for recreational
use only. The demands of commercial or professional diving may expose the diver to depths
and conditions that tend to increase the risk of decompression sickness (DCS). Therefore,
Suunto strongly recommends that the device not be used for any commercial or professional
diving activities.
WARNING: USE BACKUP INSTRUMENTS! Ensure that you use backup instrumentation,
including a depth gauge, submersible pressure gauge, timer or watch, and have access to
decompression tables whenever diving with a dive computer.
WARNING: For safety reasons, you should never dive alone. Dive with a designated
buddy. You should also stay with others for an extended time after a dive as the onset of
possible DCS may be delayed or triggered by surface activities.
WARNING: PERFORM PRE-CHECKS! Always check that your dive computer is functioning
properly and has the correct settings before diving. Check that the display is working, the
battery level is OK, tank pressure is correct, and so forth.
WARNING: Check your dive computer regularly during a dive. If you believe or conclude
that there is any problem with any computer function, abort the dive immediately and safely
return to the surface. Call Suunto Customer Support and return your computer to an
authorized Suunto Service Center for inspection.
WARNING: THE DIVE COMPUTER SHOULD NEVER BE TRADED OR SHARED BETWEEN
USERS WHILE IT IS IN OPERATION! Its information will not apply to someone who has not
been wearing it throughout a dive, or sequence of repetitive dives. Its dive profiles must
match that of the user. If it is left on the surface during any dive, the dive computer will give
inaccurate information for subsequent dives. No dive computer can take into account dives
made without the computer. Thus, any diving activity up to four days prior to initial use of the
computer may cause misleading information and must be avoided.
WARNING: DO NOT EXPOSE ANY PART OF YOUR DIVE COMPUTER TO ANY GAS MIX
CONTAINING MORE THAN 40% OXYGEN! Enriched air with greater oxygen content presents
a risk of fire or explosion and serious injury or death.
WARNING: DO NOT DIVE WITH A GAS IF YOU HAVE NOT PERSONALLY VERIFIED ITS
CONTENTS AND ENTERED THE ANALYZED VALUE INTO YOUR DIVE COMPUTER! Failure to
verify tank contents and enter the appropriate gas values where applicable into your dive
computer will result in incorrect dive planning information.
WARNING: Using a dive planner software such as in Suunto DM5 is not a substitute for
proper dive training. Diving with mixed gases has dangers that are not familiar to divers
diving with air. To dive with Trimix, Triox, Heliox and Nitrox or all of them, divers must have
specialized training for the type of diving they are doing.
5
Suunto EON Core
WARNING: Do not use Suunto USB Cable in areas where flammable gases are present.
Doing so may cause an explosion.
WARNING: Do not disassemble or remodel Suunto USB Cable in any way. Doing so may
cause an electric shock or fire.
WARNING: Do not use Suunto USB cable if cable or parts are damaged.
CAUTION: DO NOT allow the connector pins of the USB cable to touch any conductive
surface. This may short circuit the cable, making it unusable.
Emergency ascents
In the unlikely event that the dive computer malfunctions during a dive, follow the emergency
procedures provided by your certified dive training agency to immediately and safely ascend.
6
Suunto EON Core
2. Getting started
2.1. Display states and views
Suunto EON Core has two main views in surface and dive states: time/no deco and compass.
Change the main view by pressing the middle button.
The lower right
and while diving, also no deco and stops. You can change what is shown by pressing the
lower button.
NOTE: Main views can be customized. See 3.8. Customize dive modes with DM5.
Suunto EON Core automatically switches between surface and dive state. If you are more
than 1.2 m (4 ft) below the water level, the dive state is activated.
The following display shows Suunto EON Core when tank pressure screen is in use:
•
Present depth is 19.0 m
•
Dive time is 22 minutes
•
Tank pressure left is 125 bar
•
No decompression time is 50 minutes
•
Safety stop is ahead at 3.0 meters
•
16 hours of diving time left before need to recharge
field shows multiple information including max. depth, tank pressure, timer,
2.2. Icons
Suunto EON Core uses the following icons:
No-fly
time
Surface (interval) time
Battery status (for device: charging, ok, low; for Tank POD: ok, low)
Battery level - number indicates remaining diving time before need to
recharge
7
Suunto EON Core
Tank / gas pressure information
2.3. Set up
To get the most out of your Suunto EON Core, use some time to customize features and
displays. Make absolutely sure that you know your computer and have it set up as you want
before getting into the water.
To get started
1. Wake up the device by connecting the USB cable to PC/Mac (or USB power source if
available).
2. Follow the startup wizard to set up the device. When ready, the device goes to surface
state.
3. Fully charge before first dive.
The startup wizard guides you through:
•
Language
•
Units
•
Time format (12h/24h)
•
Date format (dd.mm / mm.dd)
•
Connecting with DM5 (optional)
2.4. Product compatibility
Suunto EON Core can be used together with Suunto Tank POD for wireless transmission of
tank pressure to the dive computer. One or more Tank PODs can be paired with the dive
computer for multi-gas diving.
8
Suunto EON Core
This dive computer can also be paired with the Suunto Movescount App over Bluetooth. With
the app you can change device settings and transfer dive logs to Suunto Movescount.
You may also connect this dive computer to a PC or Mac with the supplied USB cable and use
Suunto DM5 to modify device settings, plan dives, as well as update the dive computer
software.
With the optional bungee adapter kit for Suunto EON Core, you can replace the default strap
with a bungee cord if desired.
Do not use this dive computer with any unauthorized accessories or attempt to connect
wirelessly with mobile apps or equipment not authorized or
ocially supported by Suunto.
2.5. Before you dive
Make sure that you fully understand the use, displays and limitations of your dive instruments.
If you have any questions about this manual or dive computer, contact your Suunto dealer
before diving. Always remember that YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY!
This dive computer is intended for use with compressed air only. Do not use with any other
type of scuba diving. The compressed air supply must comply wtih EU standard EN12021:2014
requirements.
Before leaving on a dive trip, it is highly recommended that inspect your dive computer
closely to make sure everything is functioning properly.
At the dive site, you should perform your manual checks before entering the water.
For the dive computer, ensure that:
1. Suunto EON Core is in the correct mode and the display is working as expected.
2. Altitude setting is correct.
3. Personal setting is correct.
4. Deepstops are set correctly.
5. Unit system is correct.
6. Compass is calibrated. Start the calibration manually to also
computer audible sounds are working. After successful calibration, you should here a
sound.
7. The battery is fully charged.
8. All primary and backup gauges for time, pressure and depth, both digital and mechanical,
are showing correct, consistent readings.
9. If Suunto Tank PODs are in use, connections are working and gas selections are correct.
confirm that the dive
9
Suunto EON Core
3. Features
3.1. Alarms, warnings and notifications
Suunto EON Core has color-coded alarms, warnings and notifications. They are shown
prominently on the display with an audible alarm (if tones are on). Alarms are always red.
Warnings may be red or yellow.
When an alarm, warning, or notification occurs, a message is displayed as a pop-up. Pop-up
messages can be acknowledged by pressing any button. The information needing attention
remains on screen or as a scrollable element in the bottom
normal.
Alarms are critical events that always require immediate action. When an alarm situation
comes back to normal, the alarm will stop automatically.
Notifications are always yellow.
field until the situation is back to
Alarm
Explanation
Ascent speed exceeds safe speed of 10 m (33 ft) per
minute for five seconds or more.
Decompression ceiling broken by more than 0.6 m (2 ft)
on a decompression dive. Immediately descend back
below ceiling depth and continue to ascend normally.
Partial pressure of oxygen exceeds safe level (>1.6).
Immediately ascend or change to a gas with lower
oxygen percentage.
Partial pressure of oxygen below safe level (<0.18).
Immediately descend or change to a gas with higher
oxygen percentage.
Warnings alert you to events that can impact your health and safety if you do not take action.
Acknowledge the warning by pressing any button.
Warning
CNS100% Central nervous system toxicity level at 100% limit
OTU300 Recommended daily limit for Oxygen tolerance unit
Depth Depth exceeds your depth alarm limit
10
Explanation
reached
Suunto EON Core
Warning Explanation
Dive time Dive time exceeds your dive time alarm limit
Diluent high PO2 Diluent partial pressure of oxygen exceeds safe level
(>1.6); no immediate danger unless diluent is used, e.g.
for bailout
Diluent low PO2 Diluent partial pressure of oxygen below safe level
(<0.18); no immediate danger unless diluent is used,e.g.
for bailout
Gas time Gas time exceeds your gas time alarm limit, or tank
pressure is below 35 bar (~510psi), in which case gas
time is zero.
Safety stop broken Safety stop ceiling broken by more than 0.6 m (2 ft)
Tank pressure Tank pressure is below your tank pressure alarm limit.
In addition to the configurable gas time alarm, your dive
computer also shows an alarm when 75 bar and 50 bar
pressures are reached. The tank pressure number is
forced onto the display and turns yellow after 75 bar
and red after 50 bar.
Notifications indicate events that require preventive actions. Acknowledge the notification by
pressing any button.
Notification
CNS80% Central nervous system toxicity level at 80% limit
OTU250 Approximately 80% of recommended daily limit for OTU
Change gas On multi-gas dive when ascending, it is safe to switch to
Low battery Approximately three hours of dive time left
Re-charge needed Approximately two hours of battery time left; re-charging
Explanation
reached
next available gas for optimum decompression profile
required before next dive
Setpoint switched Setpoint switched automatically on rebreather dive. See
3.25.3. Setpoints
Tank POD low battery Tank POD battery life low; battery change required
3.2. Algorithm lock
Suunto Fused™ RGBM algorithm is locked for 48 hours if you omit decompression stops for
longer than three (3) minutes. When the algorithm is locked, no algorithm information is
11
Suunto EON Core
available and LOCKED is shown instead. Locking the algorithm is a safety feature, highlighting
that the algorithm information is no longer valid.
When you ascend above the decompression ceiling by more than 0.6 m (2 ft), the ceiling
parameter turns red with an arrow pointing down appears, and an audio alarm is generated.
In such a condition, you should descend back below the ceiling level to continue the
decompression. If you fail to do so within three (3) minutes, Suunto EON Core locks the
algorithm calculation and displays LOCKED instead, as shown below. Note that the ceiling
value is no longer present.
In this state, you significantly increase your risk of decompression sickness (DCS).
Decompression information is not available for the next 48 hours after surfacing.
It is possible to dive with the device when the algorithm is locked, but instead of the
decompression information, LOCKED is shown. Going to dive mode when algorithm is locked
resets the algorithm lock time back to 48 hours when you surface.
3.3. Ascent rate
During a dive, the bar on the left indicates ascent rate. One bar step corresponds to 2 m (6.6
ft) per minute.
The bar is also color coded:
•
Green indicates ascent rate is ok, less than 8 m (26.2 ft) per minute
•
Yellow indicates ascent rate is moderately high, 8-10 m (26-33 ft) per minute
•
Red indicates ascent rate is too high, over 10 m (33 ft) per minute
When maximum allowed ascent rate is exceeded for five seconds, an alarm is generated.
Ascent rate violations result in longer safety stop times.
WARNING: DO NOT EXCEED THE MAXIMUM ASCENT RATE! Rapid ascents increase the
risk of injury. You should always make the mandatory and recommended safety stops after
you have exceeded the maximum recommended ascent rate. If this mandatory safety stop is
not completed the decompression model will penalize your next dive(s).
12
Suunto EON Core
3.4. Battery
Suunto EON Core has a rechargeable lithium-ion battery. Charge the battery by connecting
Suunto EON Core to a power source with the included USB cable. As a power source use
either your computer USB port or wall charger.
The battery icon in the upper-left corner of the display shows the battery status. To the right of
the battery icon is the estimated remaining dive time in hours.
Icon Explanation
Estimated remaining dive time is 16 hours; no immediate need to recharge
Estimated remaining dive time is three (3) hours or less; recharge needed
Estimated remaining dive time is less than one (1) hour; recharge
immediately
Battery is charging, showing current charge level as remaining dive time
When the charge level drops below 2 (two) hours, you cannot start a dive with Suunto EON
Core. A pop-up message indicates recharge is needed.
3.5. Bookmark
Keep the lower button pressed to add a bookmark (timestamp) to the active log for later
reference.
If you save a bookmark while the compass view is active, the bookmark includes both a
timestamp and the current compass heading.
3.6. Calendar clock
Time and date settings are found under General / Device settings / Time & date.
Time and date formats are found under General / Device settings / Units and formats.
To change time and date
1. Keep the middle button pressed to enter menu.
2. Browse to General / Device settings / Time & date.
3. Scroll to Set time or Set date with the upper or lower button.
4. Press the middle button to enter the setting.
5. Adjust the setting with the upper or lower button.
13
Suunto EON Core
6. Press the middle button to move to the next setting.
7. Press again the middle button when last value is set to save and go back to Time & date
menu.
8. Keep middle button pressed to exit when done.
To change time and date formats
1. Keep the middle button pressed to enter menu.
2. Browse to General / Device settings / Units and formats.
3. Scroll to Time format or Date format with the upper or lower button.
4. Follow steps 5-8 as above to change and save formats.
3.7. Compass
Suunto EON Core includes a tilt-compensated digital compass, available as a main view.
3.7.1. Calibrating compass
When you
EON Core displays the calibration icon when you enter the compass view. Calibrate the
compass by slowly rotating the unit in your hand in large figure-8 loops.
During the calibration process, the compass adjusts itself to the surrounding magnetic field.
Because of changes in the surrounding magnetic field, it is recommended to re-calibrate the
compass before each dive.
To manually start calibration:
1. Keep the middle button pressed to enter the menu.
2. Browse to General / Compass.
3. Press the middle button to enter Compass.
4. Scroll up or down to select Calibrate.
5. Start calibration by moving the device around in a 3D
6. A sound indicates the calibration succeeded, and the screen goes back to Compass
menu.
first start using Suunto EON Core, the compass needs to be calibrated. Suunto
figure-8 as the image suggests.
NOTE: If the calibration fails several times in a row, you may be in an area with strong
sources of magnetism, such as large metal objects. Move to another location and try to
calibrate the compass again.
14
Suunto EON Core
3.7.2. Setting declination
You should always adjust your compass declination for the area where you are diving to get
accurate heading readings. Check the local declination from a trusted source and set the
value in Suunto EON Core.
To set declination:
1. Keep the middle button pressed to enter the menu.
2. Browse to General / Compass.
3. Press the middle button to enter Compass.
4. Press the middle button again to enter Declination.
5. Scroll up/down to set the angle of declination: Starting from 0.0º scroll up towards East or
down towards West declination. To turn declination o, set declination angle to 0.0º.
6. Press middle button to save changes and go back to the Compass menu.
7. Keep the middle button pressed to exit.
3.7.3. Setting bearing lock
A bearing is the angle between north and your target. In simple terms, it is the direction you
want to travel. Your heading, on the other hand, is your actual direction of travel.
You can set a bearing lock to help you orientate yourself underwater and ensure you maintain
your direction of travel. For example, you can set a bearing lock for the direction to the reef
before leaving the boat.
You can reset the bearing lock at any time, but you can only clear a bearing lock while at the
surface.
To set a bearing lock:
1. Press the middle button to change to the compass view.
2. Hold your Suunto EON Core in level in front of you, with the top pointing in the direction to
your target.
3. Keep the lower button pressed until you see the Bearing locked
notification.
Once you have a bearing locked, the lock position is indicated on the compass rose, as
shown below.
Below your heading (large number in center of compass), you also see the relative dierence
between your bearing and your heading. So, for instance, when you want to travel in the
exact direction of your bearing, the lower number should be 0°.
If you want to set a new bearing lock, just repeat the same procedure above. Each bearing
lock is recorded in your dive log with a time stamp.
To clear the bearing lock from your compass view, you need to return to the surface.
To clear a bearing lock:
1. While in surface state, keep the middle button pressed to enter the main menu.
2. Scroll to GENERAL with the upper or lower buttons and press the middle button.
15
Loading...