SUUNTO COMBOS User Manual

en

SUUNTO COMBOS AND MECHANICAL
INSTRUMENTS

INSTRUCTION MANUAL

Combo Consoles I Console Compasses CB-71/STD and CB-71/DS
Depth Gauge SM-16 I Pressure Gauge SM-36

SUUNTO Combo Consoles
Introduction

The Suunto combo consoles for recreational use, allow you to create a personal combo according to your own specifi c
needs. Analog gauges, dive computers and compasses fi t together like building blocks.

The combos consist of four main modules: the pressure gauge module, the instrument module and two different compass
modules.

The pressure gauge module is designed for the Suunto pressure gauges and it can also be used with the new Suunto Quick
Release (QR). The basic combinations are displayed below:

2

Assembling the Combo Modules

1

2

(3)

3

5

4

(5)

1. CB-ONE module front cover with SM-36 pressure gauge in place (see section CB-ONE Module assembly)

2. CB-IN-LINE module front cover

3. CB-end piece or CB-71/STD compass (optional)

4. CB-IN-LINE module back cover with instrument

5. CB-ONE module back cover or CB-71/DS compass (optional)
3

CB-ONE Module Assembly

The CB-ONE Module is designed to fi t the Suunto SM-36 analog pressure gauges.
Before assembling the CB-ONE module the hose cover needs to be fi tted on the pressure hose. The hose cover ensures

that the SM-36 pressure gauge fi ts properly on the CB-ONE module.

If the Suunto Quick Release is used, the hose cover is not to be used (See section CB-ONE module assembly using the
SUUNTO Quick Release).

After attaching the hose cover the pressure hose and gauge are assembled on the CB-ONE front cover according to the
picture.

After the pressure gauge is in place the CB-ONE back cover (or alternatively the CB-71/SK-7/DS compass) is attached with
four screws.

4