Suprema BST2MOC, BST2ROC User Manual

www.suprema.co.kr
BioStationT2
Innovative Fingerprint Terminal
Installation Guide
(ver0.1)
Product Contents
Product Contents
Terminal Wall mounting metal bracket
Screw for fixing main body
Wallmounting
screwsand holders-4 ea
Ferrite Core
Software CD
12V DC Adaptor
Cables
2
Copyright 2010Suprema Inc.
Product Contents
n Optional accessories
USB fingerprint scanner f
or enrollmenton PC
Wireless LAN Access Point
3
Copyright 2010Suprema Inc.
Cable and Connector Pinout
Relay
PIN PIN DESCRIPTION
1 NORMAL OPEN 2 COMMON 3 NORMAL CLOSE
Before Start
RS485
PIN PIN DESCRIPTION
1 TRX ­2 TRX + 3 GND 4 SHIELD GND
4
Copyright 2010Suprema Inc.
Cable and Connector Pinout
Switch Input
VDP
PIN PIN DESCRIPTION
1 SWIN_IN0 2 SWIN_IN1 3 GND 4 SHIELD_GND 5 SWIN_IN2 6 SWIN_IN3 7 GND 8 SHIELD_GND
PIN PIN DESCRIPTION
1 VDP_S 2 GND 3 VDP_VCC 4 VDP_V 5 VDP_OPEN 6 GND 7 SHIELD_GND
Before Start
Wiegand
PIN PIN DESCRIPTION
1 WIEGAND_D0 2 WIEGAND_D1 3 GND 4 SHIELD GND
5
Copyright 2010Suprema Inc.
Installation Example
8P Cable
PC
Network HUB
Firmware
Upgrade Only
Ethernet
3P Cable
Door Lock
Exit Button
USBUSB
6
Copyright 2010Suprema Inc.
Product Dimension
160
160
전면
(unit : mm)
7
Copyright 2010Suprema Inc.
Power Connection
n Power connection
n Recommended
l12V ± 10%, at least 1500mA for BioStationT2 alone installation. lComply with standard IEC/EN 60950-1
8
Copyright 2010Suprema Inc.
LAN Connection
Copyright 2010Suprema Inc.
9
RS485 Network Connection
Before Start
10
Copyright 2010Suprema Inc.
Relay Connection – Fail Safe Lock
Copyright 2010Suprema Inc.
11
Relay Connection – Fail Secure Lock
Copyright 2010Suprema Inc.
12
Relay Connection -Automatic Door
Copyright 2010Suprema Inc.
13
TTL Input Port Connection – RTE Switches
Copyright 2010Suprema Inc.
14
Wiegand Input Connection – External reader
Copyright 2010Suprema Inc.
15
System Specifications
n CPU :Main B/D CPU -ARM11 667MHz (Samsung S3C6410-667) X 1ea n Sensor B/D CPU -DSP 400MHz (ADI BP531-400) X 1ea n n Memory : Main B/D -Flash : Nand MLC 1GByte + Nor 1MByte, SDRAM(mDDR) : 256MByte n Sensor B/D -Flash : SPI 512Kbyte, SDRAM : 32MByte n n DISPLAY : 5inch WVGA TFT LCD (800 X 480) X 1ea n LED : 3-Color LED X 2ea n INPUT : 저항막방식 Touch Screen X 1ea + 5 Keypad (F1~F4, CALL) n CAMERA : 1.3M CMOS Camera X 1ea n I/O Port : Wiegand In/Out (S/W 설정을통해 Input 또는 Output으로사용가능) X 1ch n Switch Input X 4ch n RS-485 X 2ch n RS-232(Share with RS-485) X 1ch n Relay(1A@30Vdc) X 2ch n Ethernet(10/100M) X 1ch n Sound Out: System SoundSpeaker X 2ea n RF CARD : Mifare / EM n Fingerprint Sensor : OC Sensor Model n Power Input : 12Vdc Adaptor or POE Input
기타
16
Copyright 2010Suprema Inc.
FCC Rules
Caution
Warning
Information to User
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and (2) this device must accept any interface received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more the following measures:
1. Reorient / Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help
Copyright 2010Suprema Inc.
17
Electrical Specification
Min. Typ. Max. Notes
Power
Voltage (V) 10.8 12 13.2
Current (mA) - 600 1000 TTL/Wiegand Input VIH(V) 2 - ­VIL(V) - - 0.8 Pull-up resistance () - 10k ­TTL/Wiegand Output VOH(V) 4 - - @ IOH= -5mA VOL(V) - - 1 @ IOL= 5mA Output resistance () - 100 ­Relay
Switching capacity (A) - -
Switching power (resistive)
Switching voltage (V) - -
- -
1
0.3
30W
37.5VADCAC 110
125
30V DC 125V AC
DC AC
18
Copyright 2010Suprema Inc.
Suprema Inc.
16F Parkview Office Tower, Jeongja-dong, Bundang-gu,
Seongnam, Gyeonggi, 463-863 Korea
E-mail : support@supremainc.com
Website : www.supremainc.com
Functions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.
Loading...