Suprema BSA2-OEPW, BSA2-OHPW, BSA2-OIPW, BSA2-OMPW User Manual
BioStation A2
USER GUIDE
Version 1.27
English
EN 102.00.BSA2 V1.27A
Contents
Safety Instructions ........................................................................................... 4
Introduction ...................................................................................................... 6
Components ....................................................................................................................................................... 6
Name and function of each part ....................................................................................................................... 7
Cables and connectors ................................................................................................................................ 9
How to enroll a fingerprint correctly ............................................................................................................. 10
Selecting a finger for fingerprint input ................................................................................................... 10
Fingerprint enroll method ........................................................................................................................ 10
Admin Menu ................................................................................................... 11
All Menus .......................................................................................................................................................... 11
User ................................................................................................................. 12
Registering user information ......................................................................................................................... 12
Modifying user information ........................................................................................................................... 13
Delete All Users ................................................................................................................................................ 13
View User Usage .............................................................................................................................................. 13
Authentication ............................................................................................... 14
Auth Mode ........................................................................................................................................................ 14
Modifying Auth Mode ............................................................................................................................... 14
Delete Auth Mode ..................................................................................................................................... 15
Add Auth Mode .......................................................................................................................................... 15
Operation ......................................................................................................................................................... 15
Fingerprint ....................................................................................................................................................... 16
NETWORK ....................................................................................................... 17
Network Settings ............................................................................................................................................. 17
Ethernet ...................................................................................................................................................... 17
Wireless ...................................................................................................................................................... 18
Server ......................................................................................................................................................... 18
Serial Settings .................................................................................................................................................. 19
RS-485 ........................................................................................................................................................ 19
DISPLAY & SOUND ......................................................................................... 20
Device ............................................................................................................. 21
Camera ............................................................................................................................................................. 21
Relay ................................................................................................................................................................. 21
Date & Time ...................................................................................................................................................... 21
Daylight Saving Time ...................................................................................................................................... 22
Device Info ....................................................................................................................................................... 22
Memory Info..................................................................................................................................................... 22
USB Memory .................................................................................................................................................... 22
Secure Tamper ................................................................................................................................................. 23
Restart Device .................................................................................................................................................. 23
Restore Default ................................................................................................................................................ 23
Factory Default ................................................................................................................................................ 23
Delete the Root Certificate ............................................................................................................................. 24
User ID Type ..................................................................................................................................................... 24
T&A Mode ....................................................................................................... 25
2
EVENT LOG ..................................................................................................... 26
Search Log ........................................................................................................................................................ 26
Detail View Log ................................................................................................................................................ 26
Delete All Logs ................................................................................................................................................. 27
View Log Usage ................................................................................................................................................ 27
Troubleshooting ............................................................................................ 28
Checklist before reporting a failure ............................................................................................................... 28
Product Specifications .................................................................................. 29
Dimensions ...................................................................................................................................................... 30
FCC compliance information ........................................................................ 31
EU Declaration of Conformity (CE) ............................................................... 31
Appendices ..................................................................................................... 32
Disclaimers ....................................................................................................................................................... 32
Copyright notice .............................................................................................................................................. 32
Open Source License ....................................................................................................................................... 32
GNU General Public License ..................................................................................................................... 32
OpenSSL License........................................................................................................................................ 38
Original SSLeay License ............................................................................................................................ 39
Apache License .......................................................................................................................................... 39
3
Safety Instructions
Safety Instructions
Observe the following instructions to use the product safely and prevent any risk of injury or property damage.
Warning
Noncompliance of instructions could lead to serious injury or death.
Installation
Do not install the product in a place with direct sunlight, moisture, dust, or soot.
• A fire or electric shock may occur.
Do not install the product in a place with heat from an electric heater.
• A fire or electric shock may occur due to overheating.
Install the product in a dry place.
• Otherwise, a product damage or electric shock may occur due to moisture.
Install the product in a place with no electromagnetic interference.
• Otherwise, a product damage or electric shock may occur.
The user should not install or repair the product independently.
• A fire, electric shock, or personal injury may occur.
• If the product has been damaged due to independent installation or repair of the product by the user, free A/S service will not
be provided.
Usage
Do not allow liquids such as water, beverages, or chemicals get into the product.
• A fire, electric shock, or product damage may occur.
Caution
Noncompliance of instructions could lead to minor injury or product damage.
Installation
Do not install the power supply cable in a place where people pass by.
• Product damage or physical injury may occur.
Do not install the product near a highly magnetic object such as a magnet, TV, (especially CRT) monitor, or speaker.
• A product failure may occur.
Use only a power supply adaptor of D.C 12 V and 500 mA or higher.
• If the proper power is not used, the product may not operate normally.
If installing the product outside where the product is completely exposed, it is recommended to install the product together with
the enclosure.
Use a separate power supply for Secure I/O 2, electric lock and BioStation A2 respectively.
• If connecting and using the power supply to these devices together, the devices may malfunction.
Keep at least 10cm distances between the devices when install multiple devices.
• Otherwise, RF performance is affect to the other device, the devices may not operate normally.
4
Safety Instructions
Operation
Do not drop the product or apply an impact to the product.
• A product failure may occur.
Manage the password with care not to disclose it to others and change the password periodically.
• Otherwise, illegal intrusion may occur.
Do not press the buttons on the product forcibly or using a sharp tool.
• A product failure may occur.
Be careful not to contaminate or damage the fingerprint contact unit with a dirty hand or foreign substances.
• Deterioration in fingerprint authentication performance and a product failure may occur.
When cleaning the product, wipe the product with a soft and dry cloth and no water, benzene or alcohol.
• Otherwise, a product failure may occur.
BioStation A2 uses capacitive buttons and screen. If the environment is moist from wet weather or the product surface is
smeared with a lot of water, wipe off the product with a dry towel before using it.
RTC battery
Replacing the battery with an incorrect type of battery may cause explosion.
Discard the battery according to the appropriate regional or international waste regulations.
5
Introduction
BioStation A2
Wall Bracket
Fixing Screw x4
PVC Anchor x4
Diode
Connection Cable
Ferrite Core
Drilling Template
Quick Guide
120 Ω resistor
Open Source Software Guide
Bracket Fixing Screw
Components
Introduction
(2 pins 1 EA, 3 pins 2 EA, 4 pins 4 EA)
(Star Shaped)
NOTE
• Components may vary according to the installation environment.
• When assembling the product with the bracket, you can use the included bracket fixing screw(Star Shaped) instead of the
product fixing screw for enhanced security.
• For additional content regarding product installation, access the Suprema website (www.suprema.co.kr) and view the installation
guide.
6
Name and function of each part
Fingerprint
authentication unit
RF card authentication
unit
Fingerprint authentication
Menu button
LED lamp
Microphone
LCD screen
USB memory slot
TTL input (4 pins)
Power supply (2 pins)
Relay 0 (3 pins)
RF card authentication
Mini USB cable slot
Speaker
Camera
Home button
Cancel button
Ethernet
Relay 1 (3 pins)
Wiegand input (4 pins)
Wiegand output (4 pins)
RS-485 (4 pins)
Introduction
unit
unit
Name Description
Microphone Delivers the voice of the user when the interphone is connected.
LCD screen Provides UI for operation.
Menu button ( )
Home button ( )
Cancel button ( )
Speaker Delivers sound.
LED lamp Indicates the operational status of the product with the color of the LED lamp.
USB memory slot Connects USB memory.
Mini USB cable slot Will be supported in the future.
Displays the list of menus.
Navigates to the home screen.
Navigates back to the previous screen.
Part to scan the fingerprint for entrance.
Part to scan the card for entrance.
TTL input (4 pins) Connects the TTL input cable.
7
RS-485 (4 pins) Connects the RS-485 cable.
Relay (3 pins) Connects the relay cable.
Power supply (2 pins) Connects the power supply cable.
Ethernet Connects the Ethernet cable.
Wiegand input (4 pins) Connects the Wiegand input and output cable.
Wiegand output (4 pins) Connects the Wiegand input and output cable.
Introduction
8
Cables and connectors
1
PWR +VDC
Red (white stripe)
2
PWR GND
Black (white stripe)
1
RLY N O
White
2
RLY C O M
Blue
3
RLY N C
Orange
1
485 TRXP
Blue
2
485 TRXN
Yellow
3
485 GND
Black
4
SH GND
Gray
1
TTL IN0
Red
2
TTL IN1
Yellow
3
TTL GND
Black
4
SH GND
Gray
1
WG D0
Green
2
WG D1
White
3
WG GND
Black
4
SH GND
Gray
Power
Pin Name Color
Relay
Pin Name Color
Introduction
RS-485
Pin Name Color
TTL input
Pin Name Color
Wiegand input and output
Pin Name Color
9
Introduction
• In preparation for a situation in which the fingerprint of a specific finger cannot be used, for
or the middle finger when scanning the
1
When a message saying “Scan the fingerprint.” is displayed on the LCD screen for enrolling the fingerprint, place the finger
with the fingerprint you wish to enroll on the fingerprint authentication unit and press the finger gently for better
authentication.
2
When the re-input screen is displayed after a beep sound, scan the fingerprint of the enrolled finger again (scan the
fingerprint of a finger to be enrolled twice).
How to enroll a fingerprint correctly
In order to improve the fingerprint authentication rate, enroll the fingerprint correctly. BioStation A2 can recognize a fingerprint
even if the angle and position of a user's fingerprint input change. If you enroll a fingerprint with attention to the following
matters, the authentication rate can be improved.
Selecting a finger for fingerprint input
example if the user is lifting a load with one hand or a finger gets hurt, up to 10 fingerprints
for each user can be enrolled.
• In the case of a user whose fingerprint cannot be recognized well, the authentication rate
can be improved by enrolling the same finger twice repeatedly.
• If a finger has a cut or the fingerprint is blurry, select another finger for the fingerprint.
• It is recommended to use the index finger
fingerprint. The authentication rate can be reduced if it is difficult to place another finger at
the center of fingerprint sensor accurately.
Fingerprint enroll method
NOTE
Cautions for enrolling a fingerprint
When a fingerprint is recognized, it is compared with the initially registered fingerprint, so the initial fingerprint enroll is the most important.
Pay attention to the following matters when enrolling the fingerprint.
• Place the finger deep enough to contact with the sensor completely.
• Place the center of the fingerprint in the center of the sensor.
• If a finger has a cut or the fingerprint is blurry, select another finger for the fingerprint.
• Scan the fingerprint correctly without moving according to the instruction on the screen.
• If you make the finger upright so that the contact area with the sensor is decreased or the angle of finger is warped, fingerprint
authentication may not be performed.
When the fingerprint recognition fails
BioStation A2 can recognize a fingerprint regardless of a change of season or finger condition. However, the authentication rate may vary
according to the external environment or fingerprint input method.
If the fingerprint authentication cannot be done smoothly, it is recommended to take the following measures.
• If the finger is smeared with water or sweat, dry off the finger and then scan the finger.
• If the finger is too dry, blow your breath on the fingertips and then scan the finger.
• If the finger has a cut, register the fingerprint of another finger.
• The initially enrolled fingerprint often may have not been scanned correctly, so enroll the fingerprint again according to ‘Cautions for
enrolling a fingerprint’.
10
Admin Menu
All Menus
1 Press and authenticate with the Admin level credential.
2 Select the desired menu.
Admin Menu
NOTE
• In case the administrator has not been designated, the menu screen will be displayed when you press .
11
User
Registering user information
The user information including fingerprints can be registered.
1 Press and authenticate with the Admin level credential.
2 Press User > .
User
3 Select and set the desired item. When you press OK, the user information will be registered.
• : Take a picture of a user with the built-in camera.
• ID: Enter a number between 1 and 429467295 to register as the user ID. If User ID Type set to Alphanumeric, a combination of
alphanumeric characters and symbols (_, -) can be used for the ID. Up to 32 characters can be input.
• Name: Enter the user name.
• Validity Period: Set a Start Date and End Date to use the user account. When you press the first date, you can set Start Date, and when
you press the second date, you can set End Date.
• Access Group: Select an access group for the user. Access groups can be registered only in BioStar 2.
• User Level: Select the level you wish to assign to a user.
• Fingerprint: Enroll a fingerprint for user authentication. Press and enroll the fingerprint. Scan the fingerprint of a finger you wish to
enroll, and then scan the fingerprint of the same finger again. To enroll an additional fingerprint, press again.
• Card: Register a card for user authentication. Press and scan the card which will be assigned to the user. To register an additional
card, press again.
• PIN: Enter the PIN you wish to use. Enter the PIN you wish to use, and then enter the same PIN again for confirmation. Enter a number
between 4 and 16 digits to prevent leaking.
• Duress: Select a fingerprint to be used as a duress fingerprint. This can be used only when 2 or more fingerprints have been enrolled.
• Private Auth Mode: Change the authentication method according to the user.
NOTE
Available menus vary according to the set user level.
• None: This is the general user level and menus cannot be accessed.
• Administrator: All menus can be accessed.
• Configuration: AUTHENTICATION, DISPLAY & SOUND, DEVICE, NETWORK menus can be accessed.
• User Mgmt: USER menu can be accessed.
12
User
Modifying user information
User Mgmt or Administrator can modify the registered user information. A fingerprint or card can be added, and PIN and level
can be modified.
1 Press and authenticate with the Admin level credential.
2 Press User > .
3 Select your search terms. You can search for a user by ID, name, fingerprint or card.
4 Select the user you wish to modify and press . Modify the information by referring to Registering user information.
• To delete a user, press and then press OK.
NOTE
• Access Groups can be registered in BioStar 2. For detailed contents regarding registering an access group, refer to BioStar 2
Administrator's manual.
Delete All Users
You can delete all registered users at once.
1 Press and authenticate with the Admin level credential.
2 Press User > and select Delete All or a user you wish to delete.
3 When you press OK, all registered users will be deleted.
View User Usage
You can see the number of registered users, fingerprints and cards at a glance.
1 Press and authenticate with the Admin level credential.
2 Press User > .
13
Loading...