Suprema BLN2-OAB, BLN2-ODB, BLN2-PAB User Manual
BioLite N2
USER GUIDE
Version 1.08
English
EN 102.00.BLN2 V1.08A
Contents
Safety Instructions ................................................................................. 4
Introduction ............................................................................................ 6
Components ................................................................................................................................................... 6
Name and function of each part ............................................................................................................... 7
Cables and connectors ........................................................................................................................... 8
How to enroll a fingerprint correctly ........................................................................................................ 9
Selecting a finger for fingerprint input .............................................................................................. 9
Fingerprint enroll method ..................................................................................................................... 9
Admin Menu ......................................................................................... 10
All Menus ..................................................................................................................................................... 10
User ...................................................................................................... 11
Registering user information..................................................................................................................... 11
Modifying user information....................................................................................................................... 12
Delete All Users .......................................................................................................................................... 12
View User Usage ......................................................................................................................................... 12
Auth ...................................................................................................... 13
Mode ............................................................................................................................................................. 13
Fingerprint Mode .................................................................................................................................. 13
Card Mode.............................................................................................................................................. 13
ID Mode .................................................................................................................................................. 14
T&A Mode .................................................................................................................................................... 14
Fingerprint .................................................................................................................................................... 15
Server Matching .......................................................................................................................................... 16
Display .................................................................................................. 17
Device ................................................................................................... 18
Date & Time ................................................................................................................................................ 18
DST ................................................................................................................................................................ 18
Relay ............................................................................................................................................................. 18
Device Info ................................................................................................................................................... 19
Memory Usage ............................................................................................................................................ 19
Secure Tamper .............................................................................................................................................. 19
Restart Device ............................................................................................................................................. 19
Restore Default ............................................................................................................................................ 20
User ID Type ................................................................................................................................................ 20
Network ................................................................................................ 21
Network Settings ......................................................................................................................................... 21
TCP/IP ...................................................................................................................................................... 21
Server ...................................................................................................................................................... 21
Serial Settings ............................................................................................................................................. 22
RS-485 ..................................................................................................................................................... 22
Event Log ............................................................................................. 23
Search Log ................................................................................................................................................... 23
Delete All Logs ............................................................................................................................................ 23
View Log Usage .......................................................................................................................................... 23
Troubleshooting .................................................................................... 24
2
Checklist before reporting a failure ........................................................................................................ 24
Product Specifications ......................................................................... 25
Dimensions ................................................................................................................................................... 26
FCC compliance information ............................................................... 27
EU Declaration of Conformity (CE) ..................................................... 27
Appendices ........................................................................................... 28
Disclaimers ................................................................................................................................................... 28
Copyright notice .......................................................................................................................................... 28
Open Source License .................................................................................................................................... 28
GNU General Public License ................................................................................................................... 28
GNU Lesser General Public License ........................................................................................................ 34
OpenSSL License .................................................................................................................................... 36
Original SSLeay License ......................................................................................................................... 36
3
Safety Instructions
Safety Instructions
Observe the following instructions to use the product safely and prevent any risk of injury or property damage.
Warning
Noncompliance of instructions could lead to serious injury or death.
Installation
Do not install the product in a place with direct sunlight, moisture, dust, or soot.
• A fire or electric shock may occur.
Do not install the product in a place with heat from an electric heater.
• A fire or electric shock may occur due to overheating.
Install the product in a dry place.
• Otherwise, a product damage or electric shock may occur due to moisture.
Install the product in a place with no electromagnetic interference.
• Otherwise, a product damage or electric shock may occur.
The user should not install or repair the product independently.
• A fire, electric shock, or personal injury may occur.
• If the product has been damaged due to independent installation or repair of the product by the user, free A/S service will not
be provided.
Usage
Do not allow liquids such as water, beverages, or chemicals get into the product.
• A fire, electric shock, or product damage may occur.
Caution
Noncompliance of instructions could lead to minor injury or product damage.
Installation
Do not install the power supply cable in a place where people pass by.
• Product damage or physical injury may occur.
Do not install the product near a highly magnetic object such as a magnet, TV, (especially CRT) monitor, or speaker.
• A product failure may occur.
Use only a power supply adaptor of D.C 12 V and 500 mA or higher.
• If the proper power is not used, the product may not operate normally.
If installing the product outside where the product is completely exposed, it is recommended to install the product together with
the enclosure.
Use a separate power supply for the Secure I/O 2, electric lock and BioLite N2 respectively.
• If connecting and using the power supply to these devices together, the devices may malfunction.
When installing a number of devices, allow a space between the devices for installation.
• Otherwise, one device may affect the RF performance of other devices, resulting in malfunction.
4
Safety Instructions
Operation
Do not drop the product or apply an impact to the product.
• A product failure may occur.
Manage the password with care not to disclose it to others and change the password periodically.
• Otherwise, illegal intrusion may occur.
Do not press the buttons on the product forcibly or using a sharp tool.
• A product failure may occur.
Be careful not to contaminate or damage the fingerprint contact unit with a dirty hand or foreign substances.
• Deterioration in fingerprint authentication performance and a product failure may occur.
When cleaning the product, wipe the product with a soft and dry cloth and no water, benzene or alcohol.
• Otherwise, a product failure may occur.
RTC battery
Replacing the battery with an incorrect type of battery may cause explosion.
Discard the battery according to the appropriate regional or international waste regulations.
5
Introduction
BioLite N2
Wall Bracket
Fixing Screw x2
PVC Anchor x2
Diode
Quick Guide
120 Ω resistor
Open Source Software Guide
Shrink Tube
Ferrite Core
Drilling Template
Bracket Fixing Screw
Components
Introduction
NOTE
• Components may vary according to the installation environment.
• For additional content regarding product installation, access the Suprema website (www.suprema.co.kr) and view the installation
guide.
(Star Shaped)
6
Name and function of each part
• Power cable
• TTL input cable
Fingerprint authentication unit
LCD screen
RF card authentication unit
Speaker
OK button
Keypad
Function button
ESC button
Cable
Introduction
Name Description
LCD screen Provides UI for operation.
Function button Used for T & A key or changing a letter.
Keypad
OK button
ESC button Used for opening the menu, moving to the previous screen or canceling input.
Fingerprint authentication unit Part to scan the fingerprint for entrance.
RF card authentication unit Part to scan the card for entrance.
Cable
Speaker Delivers sound.
• 0 ~ 9: Used for entering a number or letter.
• , , , : Used for moving to the desired item.
Used for selecting and setting T&A Mode. If a job code is set, you can change the job code of
the user by pressing this button long.
• RS-485 cable
• Ethernet connector
• Relay output cable
• Wiegand input or output cable
7
Cables and connectors
1
PWR +VDC
Red 2 PWR GND
Black (White stripe)
3
485 TRXP
Blue (White stripe)
4
485 TRXN
Yellow (Black stripe)
5
485 GND
White (Black stripe)
6
ENET RXN
Yellow
7
ENET RXP
Green
8
ENET TXN
Red 9 ENET TXP
Black
10
RLY N O
Gray (White stripe)
11
RLY C OM
Green (White stripe)
12
RLY N C
Orange (White stripe)
13
WG D0
Green
14
WG D1
White
15
TTL GND
Gray
16
TTL IN 1
Brown
17
TTL IN 0
Purple
Introduction
Pin Name Color
8
Introduction
• In preparation for a situation in which the fingerprint of a specific finger cannot be used, for
inger or the middle finger when scanning the
1
When a message saying “Place your finger on the sensor.” is displayed on the LCD screen for enrolling the fingerprint, place
the finger with the fingerprint you wish to enroll on the fingerprint authentication unit and press the finger gently for better
authentication.
2
When the re-input screen is displayed after a beep sound, scan the fingerprint of the enrolled finger again (scan the
fingerprint of a finger to be enrolled twice).
How to enroll a fingerprint correctly
In order to improve the fingerprint authentication rate, enroll the fingerprint correctly. BioLite N2 can recognize a fingerprint even
if the angle and position of a user's fingerprint input change. If you enroll a fingerprint with attention to the following matters, the
authentication rate can be improved.
Selecting a finger for fingerprint input
example if the user is lifting a load with one hand or a finger gets hurt, up to 10 fingerprints
for each user can be enrolled.
• In the case of a user whose fingerprint cannot be recognized well, the authentication rate
can be improved by enrolling the same finger twice repeatedly.
• If a finger has a cut or the fingerprint is blurry, select another finger for the fingerprint.
• It is recommended to use the index f
fingerprint. The authentication rate can be reduced if it is difficult to place another finger at
the center of fingerprint sensor accurately.
Fingerprint enroll method
NOTE
Cautions for enrolling a fingerprint
When a fingerprint is recognized, it is compared with the initially registered fingerprint, so the initial fingerprint enroll is the most
important. Pay attention to the following matters when enrolling the fingerprint.
• Place the finger deep enough to contact with the sensor completely.
• Place the center of the fingerprint in the center of the sensor.
• If a finger has a cut or the fingerprint is blurry, select another finger for the fingerprint.
• Scan the fingerprint correctly without moving according to the instruction on the screen.
• If you make the finger upright so that the contact area with the sensor is decreased or the angle of finger is warped, fingerprint
authentication may not be performed.
When the fingerprint recognition fails
BioLite N2 can recognize a fingerprint regardless of a change in season or finger condition. However, the authentication rate may vary
according to the external environment or fingerprint input method.
If the fingerprint authentication cannot be done smoothly, it is recommended to take the following measures.
• If the finger is smeared with water or sweat, dry off the finger and then scan the finger.
• If the finger is too dry, blow your breath on the fingertips and then scan the finger.
• If the finger has a cut, register the fingerprint of another finger.
• The initially enrolled fingerprint often may have not been scanned correctly, so enroll the fingerprint again according to ‘Cautions for
enrolling a fingerprint’.
9
Admin Menu
All Menus
1 Press ESC and authenticate with the Admin level credential.
2 Select the desired menu.
NOTE
• If the administrator has not been designated, the menu screen will be displayed when you press ESC.
Admin Menu
10
User
Registering user information
The user information including fingerprints can be registered.
1 Press ESC and authenticate with the Admin level credential.
2 Select USER > Add User, then press .
3 Select the desired item, then press and set or . When you press OK, the user information will be registered.
• User ID: Enter a number between 1 and 429467295 to register as the user ID. If User ID Type set to Alphanumeric, a combination of
alphanumeric characters and symbols (_, -) can be used for the ID. Up to 32 characters can be input.
• User Name: Enter the user name using the number keypad and the function button.
• Fingerprint: Enroll a fingerprint for user authentication. Scan the fingerprint of a finger you wish to enroll, and then scan the fingerprint of
the same finger again. You can delete the fingerprint by selecting a fingerprint to delete and pressing . You can also scan the
fingerprint again by pressing . To add a fingerprint, select + Add Finger, then press .
• Card: Register a card for user authentication. Scan the card that will be assigned to the user.
• PIN: Enter the PIN you wish to use. Enter the PIN you wish to use, and then enter the same PIN again for confirmation. Enter a number
between 4 and 16 digits to prevent leaking.
• Operator Level: Select the level you wish to assign to a user.
• Start Date: Set a start date to use the user account.
• Expiry Date: Set the expiry date of the user account.
• 1:1 Security Level: Set the security level for 1:1 authentication.
• Duress: Select a fingerprint to be used as a duress fingerprint. This can be used only when 2 or more fingerprints have been enrolled.
• Private Auth Mode: Change the authentication method according to the user.
User
4 To save settings, press OK.
NOTE
Available menus vary according to the set operator level.
• Normal User: This is the normal user level. Menus cannot be accessed.
• Administrator: All menus can be accessed.
• Configuration: AUTH, DISPLAY, DEVICE, NETWORK, EVENT LOG menus can be accessed.
• User Management: USER, EVENT LOG menu can be accessed.
11
User
Modifying user information
User Management or Administrator can modify the registered user information. A fingerprint or card can be added, and PIN and
level can be modified.
1 Press ESC and authenticate with the Admin level credential.
2 Select USER > Search User, then press .
3 Select your search terms. You can search for a user by All, User ID, User Name, Fingerprint, or Card.
4 Select the user you wish to modify and press . Modify the information by referring to Registering user information.
• To delete a user, press , then press OK.
NOTE
• Access Groups can be registered in BioStar 2. For detailed contents regarding registering an access group, refer to BioStar 2
Administrator's manual.
Delete All Users
You can delete all registered users at once.
1 Press ESC and authenticate with the Admin level credential.
2 Select USER > Delete All Users, then press .
3 When you press OK, all registered users will be deleted.
View User Usage
You can see the number of registered users, fingerprints and cards at a glance.
1 Press ESC and authenticate with the Admin level credential.
2 Select USER > User Usage, then press .
12
Loading...