suprema BioStation L2 User Manual
English
Version 1.10
BioStation L2
USER GUIDE
www.supremainc.com
EN 102.00.BSL2 V1.10A
2
Contents
Safety Instructions .......................................................................................... 4
Introduction ...................................................................................................... 6
Components ................................................................................................................................................... 6
Name and function of each part ............................................................................................................... 7
Cables and connectors ........................................................................................................................... 8
How to enroll a fingerprint correctly ...................................................................................................... 10
Selecting a finger for fingerprint input ............................................................................................ 10
Fingerprint enroll method ................................................................................................................... 10
Admin Menu .................................................................................................. 11
All Menus ..................................................................................................................................................... 11
User ................................................................................................................. 12
Registering user information..................................................................................................................... 12
Modifying user information....................................................................................................................... 13
Delete All Users .......................................................................................................................................... 13
View User Usage ......................................................................................................................................... 13
Authentication ............................................................................................... 14
Mode ............................................................................................................................................................. 14
Fingerprint Mode .................................................................................................................................. 14
Card Mode.............................................................................................................................................. 14
ID Mode .................................................................................................................................................. 15
T&A Mode .................................................................................................................................................... 15
Fingerprint .................................................................................................................................................... 16
Server Matching .......................................................................................................................................... 17
Display & Sound ........................................................................................... 18
Device ............................................................................................................. 19
Date & Time ................................................................................................................................................ 19
Relay ............................................................................................................................................................. 19
Device Info ................................................................................................................................................... 19
Memory Info ................................................................................................................................................ 20
Restart Device ............................................................................................................................................. 20
Restore to default ....................................................................................................................................... 20
Network .......................................................................................................... 21
Network Settings ......................................................................................................................................... 21
Ethernet .................................................................................................................................................. 21
Server ...................................................................................................................................................... 21
Serial Settings ............................................................................................................................................. 22
RS-485 ..................................................................................................................................................... 22
Event Log ....................................................................................................... 23
Search Log ................................................................................................................................................... 23
Delete All Logs ............................................................................................................................................ 23
View Log Usage .......................................................................................................................................... 23
Troubleshooting ............................................................................................ 24
Checklist before reporting a failure ........................................................................................................ 24
3
Product Specifications ................................................................................. 25
Dimensions ................................................................................................................................................... 26
FCC compliance information ...................................................................... 27
Appendices ..................................................................................................... 28
Escape clause ............................................................................................................................................... 28
Copyright notice .......................................................................................................................................... 28
Safety Instructions
4
Safety Instructions
Observe the following instructions to use the product safely and prevent any risk of injury or property damage.
Warning
Noncompliance of instructions could lead to serious injury or death.
Installation
Do not install the product in a place with direct sunlight, moisture, dust, or soot.
• A fire or electric shock may occur.
Do not install the product in a place with heat from an electric heater.
• A fire or electric shock may occur due to overheating.
Install the product in a dry place.
• Otherwise, a product damage or electric shock may occur due to moisture.
Install the product in a place with no electromagnetic interference.
• Otherwise, a product damage or electric shock may occur.
The user should not install or repair the product independently.
• A fire, electric shock, or personal injury may occur.
• If the product has been damaged due to independent installation or repair of the product by the user, free A/S service will not be
provided.
Usage
Do not allow liquids such as water, beverages, or chemicals get into the product.
• A fire, electric shock, or product damage may occur.
Caution
Noncompliance of instructions could lead to minor injury or product damage.
Installation
Do not install the power supply cable in a place where people pass by.
• Product damage or physical injury may occur.
Do not install the product near a highly magnetic object such as a magnet, TV, (especially CRT) monitor, or speaker.
• A product failure may occur.
Use only a power supply adaptor of D.C 12 V and 500 mA or higher.
• If the proper power is not used, the product may not operate normally.
If installing the product outside where the product is completely exposed, it is recommended to install the product together with
the enclosure.
Use a separate power supply for the Secure I/O 2, electric lock and BioStation L2 respectively.
• If connecting and using the power supply to these devices together, the devices may malfunction.
When installing a number of devices, allow a space between the devices for installation.
• Otherwise, one device may affect the RF performance of other devices, resulting in malfunction.
Safety Instructions
5
Operation
Do not drop the product or apply an impact to the product.
• A product failure may occur.
Manage the password with care not to disclose it to others and change the password periodically.
• Otherwise, illegal intrusion may occur.
Do not press the buttons on the product forcibly or using a sharp tool.
• A product failure may occur.
Be careful not to contaminate or damage the fingerprint contact unit with a dirty hand or foreign substances.
• Deterioration in fingerprint authentication performance and a product failure may occur.
When cleaning the product, wipe the product with a soft and dry cloth and no water, benzene or alcohol.
• Otherwise, a product failure may occur.
BioStation L2 uses a capacitive screen and buttons. If the environment is moist from wet weather or the product surface is
smeared with a lot of water, wipe off the product with a dry towel before using it.
RTC battery
Replacing the battery with an incorrect type of battery may cause explosion.
Discard the batter y according to the appropriate regional or international waste regulations.
Introduction
6
Introduction
Components
• Components may vary according to the installation environment.
• For additional content regarding product installation, access the Suprema website (www.suprema.co.kr) and view the installation guide.
Note
BioStation L2
Wall bracket
Fixing screw
(2 EA)
PVC anchor
(2 EA)
Diode
(1 EA)
Connection cable
(2 pins 1 EA, 3 pins 1 EA, 4 pins 4 EA)
Ferrite core
(1 EA)
Drilling template
Quick guide
120 Ω resistor
(1 EA)
Introduction
7
Name and function of each part
Name Description
LCD screen
Provides UI for operation.
Function button
Used for the T&A Key, changing a letter, or entering a space.
Keypad
• 0 ~ 9: Used for entering a number or letter.
• , , , : Used for moving to the desired item.
OK button
Used for selecting and setting T&A Mode. If a job code is set, you can change the job code of the user
by pressing this button long.
ESC button Used for opening the menu, moving to the previous screen or canceling input.
Speaker Delivers sound.
Fingerprint authentication
unit
Part to scan the fingerprint for entrance.
RF card authentication unit
Part to scan the card for entrance.
TTL input (4 pins)
Connects the TTL input cable.
RS-485 (4 pins)
Connects the RS-485 cable.
Relay (3 pins) Connects the relay cable.
Power supply (2 pins) Connects the power supply cable.
Ethernet (4 pins) Connects the Ethernet cable.
Wiegand input and output
(4pins)
Connects the Wiegand input and output cable.
Fingerprint authentication unit
LCD screen
TTL input (4 pins)
Power supply (2 pins)
RF card authentication unit
Speaker
OK button
Ethernet
RS-485 (4 pins)
Relay (3 pins)
Wiegand input/output (4 pins)
Keypad
Function button
ESC button
Introduction
8
Cables and connectors
Power
Pin Name Color
1 PWR +VDC Red (white stripe)
2 PWR GND Black (white stripe)
Relay
Pin Name Color
1 RLY NO White
2 RLY COM Blue
3 RLY NC Orange
RS-485
Pin Name Color
1 485 TRXP Blue
2 485 TRXN Yellow
3 485 GND Black
4 SH GND Gray
TTL input
Pin Name Color
1 TTL IN0 Red
2 TTL IN1 Yellow
3 TTL GND Black
4 SH GND Gray
Wiegand input and output
Pin Name Color
1 WG D0 Green
2 WG D1 White
3 WG GND Black
4 SH GND Gray
Introduction
9
Ethernet
Pin Name Color
1 ENET RXN Yellow
2 ENET RXP Green
3 ENET T XN Red
4 ENET T XP Black
Loading...