Page 1
English
Version 2.10
BioLite Net
INSTALLATION GUIDE
www.supremainc.com
EN 101.00.BLN V2.10A
Page 2
Contents
Safety Instructions .......................................................................................... 3
Getting Started ................................................................................................ 5
Components ................................................................................................................................................... 5
Part names and features ............................................................................................................................. 6
Cables and connectors ............................................................................................................................. 7
How to Scan a Fingerprint.......................................................................................................................... 8
Choosing a finger for registration ....................................................................................................... 8
How to register a fingerprint ............................................................................................................... 8
Installation ........................................................................................................ 9
Mounting the Bracket and Product ........................................................................................................... 9
Connecting to Power .................................................................................................................................. 10
Connecting to a Network .......................................................................................................................... 10
TCP/IP ...................................................................................................................................................... 10
Connecting to an Door button/Door sensor .......................................................................................... 10
Connecting to a Relay ............................................................................................................................... 11
Fail Safe Lock ........................................................................................................................................ 11
Fail Secure Lock .................................................................................................................................... 11
Connecting to an Automatic door ..................................................................................................... 12
How to configure a Relay ................................................................................................................... 12
Connecting as a standalone ...................................................................................................................... 13
Connecting to Secure I/O 2 ...................................................................................................................... 14
Connecting as a Wiegand device ............................................................................................................. 14
Product Specifications ................................................................................. 15
Dimensions ................................................................................................................................................... 16
FCC Compliance Information ...................................................................... 17
Appendix ........................................................................................................ 18
Disclaimers ................................................................................................................................................... 18
Copyright Notice ......................................................................................................................................... 18
Page 3
Safety Instructions
3
Safety Instructions
Please read the following instructions carefully before using the product. This information is important for ensuring the safety of the user
and for preventing damage to the user's property.
Warning
Violation of the instructions may cause serious injury or death.
Installation Instructions
Do not install the product in direct sunlight or in a location that is damp or dusty.
• This can cause a fire or electric shock.
Do not install the product near any heat source such as electric heaters.
• This can cause a fire from overheat or electric shock.
Install the product in a dry place.
• Moisture can cause product damage or electric shock.
Install the product in a place where there is no electromagnetic interference.
• This can cause product damage or electric shock.
Have qualified service professionals install or repair the product.
• Otherwise, it can cause a fire, electric shock, or injury.
• If the product is damaged due to a user's unauthorized installation or dismantling of the product, a service fee will be charged for repair.
Operating Instructions
Be careful not to spill any liquid such as water, drinks, or chemicals inside the product.
• This can cause fire, electric shock, or product damage.
Caution
Ignoring these instructions may result in minor injuries or damage to the product.
Installation Instructions
Protect the power cord from being walked on or pinched.
• This can cause product damage or injur y.
Keep the product away from strong magnetic objects such as magnets, TVs, monitors (especially CRT monitors), or speakers.
• This can cause a failure.
Only use the power adapter included with the product or a DC power adapter providing a current more than 500mA.
• This device does not work if the proper power source is not used.
If installing the product outside where the product is completely exposed, it is recommended to install the product together with
the enclosure.
Use a separate power supply for Secure I/O 2, electric lock and BioLite Net respectively.
• If connecting and using the power supply to these devices together, the devices may malfunction.
Page 4
Safety Instructions
4
Operating Instructions
Do not drop the product or subject it to shock or impact during use.
• This can cause a failure.
Keep the password secret from others and change it periodically.
• Failure to do so may lead to an illegal intrusion.
Do not press the buttons on the product with excessive force or with a sharp tool.
• This can cause a failure.
Be careful not to contaminate or damage the fingerprint reader with a dirty hand or materials.
• This can decrease performance or cause failure to read a fingerprint.
Clean the product with a soft, dry cloth. Do not use alcohol, benzene, or water.
• This can cause a product failure.
Page 5
Getting Started
5
Getting Started
Components
The components may differ depending on where the product is installed.
Note
BioLite Net
Main bracket
Extension bracket
Mounting screws
for bracket
(2 pcs)
PVC anchors
(2 pcs)
Heat shrink tubes
TCP/IP connector
Hex wrench
(for mounting bracket)
Diode
(1 pc)
Adapter
Page 6
Getting Started
6
Part names and features
Name Feature
LCD screen Displays various information or settings.
Keypad
• 0–9 buttons: For entering an ID or password.
• < > direction button: Navigates to an item. When entering numbers or an IP address, the < button can be
used to delete the value entered.
• button: Chooses a function.
• button: Enters or exits a menu.
• button: Moves back to the previous screen or cancels an input.
LED lamp
•
Green: Authentication success.
• Red: Authentication failure.
• Pink: Processing.
• Blue and yellow alternate flashing every 2 seconds: The IP address has not been received via DHCP in
Device IP configuration.
• Blue and sky-blue alternate flashing every 2 seconds: Normal operation.
• Red and pink alternative flashing every 2 seconds: The device is locked or no administrator.
• Blue and red alternate flashing every 2 seconds: The clock has been reset due to an empty internal battery.
(The clock needs to be reconfigured.)
• Red flashes every 2 seconds on first use: Failure to reset. Contact the manufacturer.
• Yellow flashes briefly: Waiting for an input.
Fingerprint reader Reads fingerprints placed on it for entering and exiting.
RF card tou ch area
Reads RF cards for entering and exiting.
LED lamp
Fingerprint reader
RF card touch area
LCD screen
Keypad
Page 7
Getting Started
7
Cables and connectors
Pin Name Color
1 TTL IN0 Purple
2 TTL GND Gray
3 TTL IN1 Brown
4 TTL GND Gray
5 WG D0 Green
6 WG D1
White
7 WG GND Black
8 ENET RXN Yellow
9 ENET RXP Blue
10 ENET TXN Orange
11 ENET TXP Pink
12 RLY NC Orange (White stripe)
13 R LY CO M Green (White stripe)
14 RLY NO Gray (White stripe)
15 PWR +VDC Red
16 PWR GND Black
17 485 GND White (Black stripe)
18 485 TRXP Blue (White stripe)
19 485 TRXN Yellow (Black stripe)
Page 8
Getting Started
8
How to Scan a Fingerprint
Register a fingerprint correctly to improve the recognition rate of the fingerprint. BioLite Net can read a fingerprint even when the angle or
position of the finger has changed. If you register a fingerprint with the following instructions, the recognition rate can be improved.
Choosing a finger for registration
• Each person can register up to 10 fingerprints. If some fingers were injured or used to carry
something, they should not be used.
• If a fingerprint is not well scanned, the fingerprint can be registered twice, which improves the
recognition rate.
• If a finger is injured or the fingerprint is not clear, please use another finger for registering.
• The index finger or middle finger is preferred for registering a fingerprint. The other fingers may
show a lower recognition rate because those fingers tend to have difficulty being placed at the
center of the fingerprint reader.
How to register a fingerprint
1
When registering a fingerprint, the “Scan 1st finger” message will appear on the LCD screen. Place a finger on the fingerprint reader,
and then press softly in order to improve the recognition rate.
2
After a beep sounds and a screen appears to scan again, scan the finger again.
(The finger should be scanned twice for registering.)
Precautions for registering a fingerprint
Registering a finger is the most important procedure because this device uses the registered fingerprint to compare it with a fingerprint that the device
tries to read. Please ensure the following when registering a fingerprint:
• Place a finger firmly on the fingerprint reader for it to be read completely.
• The center of the fingerprint should be placed at the center of the fingerprint reader.
• I f a finger is injured or the fingerprint is not clear, please use another finger for registering.
• Follow the instructions on the screen and place the finger correctly without movement when a finger is read.
• I f the finger is lifted up, not placed at the center, or only part of the finger is placed on the fingerprint reader, the fingerprint may not register.
Precautions for reading a finger print
BioLite Net can read fingerprints regardless of the change in seasons or condition of the fingers. However, the external environment or the finger's
placement can affect the recognition rate.
If a fingerprint is not well read, the following actions are recommended.
• I f there is water or sweat on the finger, please wipe it off before placing the finger.
• I f the finger is too dry, please blow softly on the fingertip before placing the finger.
• I f the finger is injured, please register another finger.
• The fingerprint that is registered on the first attempt tends to be placed incorrectly. So, register a fingerprin t multiple times according to
‘Precautions for registe ring a fingerprint’.
Note
Page 9
Installation
9
Installation
Mounting the Bracket and Product
1 With the mounting screws for the bracket, mount the bracket firmly onto the surface where BioLite Net is to be installed.
If BioLite Net is to be installed on a concrete wall, make a hole with a drill, and then insert a PVC anchor into the hole before inserting the mounting
screw.
2 Attach BioLite Net onto the mounted bracket.
3 Assemble BioLite Net with the wall mount bracket by fastening hex socket head screws on the bottom of BioLite Net with a hex
wrench.
An extension bracke t is provided to help with wir ing depending on the install ation environment. Remove the main bracket from BioLite Net when using
the extension bracket.
Note
Note
Page 10
Installation
10
Connecting to Power
• Use a power adapter that has a DC 12 V (± 10%) specification with a minimum current of 500 mA. If the power adapter is shared by other devices,
the power adapter should provide a current more than the sum of the power consumption from this device (500 mA) and other devices.
• Use a separate power supply for Secure I/O 2, electric lock and BioLite Net respectively. If connecting and using the power supply to these devices
together, the devices may malfunction.
Connecting to a Network
TCP/IP
Connecting to an Door button/Door sensor
BioLite Net
1 - TTL IN0 Purple
2 - TTL GND Gray
3 - TTL IN1 Brown
4 - TTL GND Gray
Door sensor
3
Door button
BioLite Net
8 - ENET RXN Yellow
9 - ENET RXP Blue
10 - ENET TXN Orange
11 - ENET TXP Pink
TCP/IP connector
Hub
11
10 9 8
PC
Note
UPS
(Optional)
DC power
BioLite Net
15
16
15 - PWR +VDC Red
16 - PWR GND Black
Page 11
Installation
11
Connecting to a Relay
Fail Safe Lock
To u se fail safe lock, connect N/C terminal as shown below. Normally, there is a current flowing through the relay and the door is opened
when the relay is activated by blocking current flows. The door is opened when there is a blackout or power failure caused by external
conditions.
• Install the diode at both ends of the wire for the door lock device as shown in the figure to protect the relay from being damaged by the reverse
current induced when the door lock device operates.
• Make sure that the direction of the installed diode is correct.
• Install the diode close to the door lock device.
• Use a separate power source for BioLite Net from the door lock device.
Fail Secure Lock
To u se fail secure lock, connect N/O terminal as shown below. Normally, there is no current flowing through the relay and the door is
opened when the relay is activated by a current flows. The door is locked when there is a blackout or power failure caused by external
conditions.
• Install the diode at both ends of the wire for the door lock device as shown in the figure to protect the relay from being damaged by the reverse
current induced when the door lock device operates.
• Make sure that the direction of the installed diode is correct.
• Install the diode close to the door lock device.
• Use a separate power source for BioLite Net from the door lock device.
Note
BioLite Net
13 - RLY COM Green (White stripe)
14 - RLY NO Gray (White stripe)
14
13
Deadbolt /
Door strike
DC power
Note
BioLite Net
12 - RLY NC Orange (White stripe)
13 - RLY COM Green (White stripe)
Deadbolt /
Door strike
DC power
13
12
Page 12
Installation
12
Connecting to an Automatic door
How to configure a Relay
Set up the relay according to the following steps only when BioStar is not used to set up the door.
1 Press the MENU button, and then authenticate with the administrator authentication method.
2 Select Device > Door> Relay, and then press the OK button.
3 Press the OK button after entering the time that the relay is on.
4 Press the OK button after entering the time that you want.
5 Select Door Sensor, and then press the OK button.
6 Press the OK button after selecting the port that will be used to control the door sensor.
7 Select Exit Button, and then press the OK button.
8 Press the OK button after selecting the port that will be used to control the exit button.
• The INIT switch of Secure I/O 2 should be pressed after completing the relay setup when Secure I/O 2 is used together.
• Refer to BioStar administrator guide when setting up the door with Bi oStar.
Note
BioLite Net
13 - RLY COM Green (White stripe)
14 - RLY NO Gray (White stripe)
Sensor
Automatic door
controller
Door button
Door lock
14
13
Page 13
Installation
13
Connecting as a standalone
Here is how to install the device as a standalone without a connection with BioStar or other devices.
1 Refer to the following figure for connecting.
2 Set up the relay. (Please refer to How to configure a Relay.)
Door button
Door sensor
Door Lock
Input 0
Relay
Input 1
4
3
12 13
2
1
BioLite Net
1 - TTL IN0 Purple
2 - TTL GND Gray
3 - TTL IN1 Brown
4 - TTL GND Gray
12 - RLY NC Orange (White stripe)
13 - RLY COM Green (White stripe)
Page 14
Installation
14
Connecting to Secure I/O 2
Here is how to install the device when BioLite Net is connected to Secure I/O 2.
1 Refer to the following figure for connecting.
• RS-485 should be AWG24, twisted pair, and maximum length is 1.2 km.
• Connect a termination resistor (120Ω) to both ends of a RS-485 daisy chain connection. It should be installed at both ends of the daisy chain. If it is
installed in the middle of the chain, the performance in communicating will deteriorate because it reduces the signal level.
• Up to 3 2 devices can be connected via daisy chain (1 master device and 31 other devices).
2 Set up the relay. (Please refer to How to configure a Relay.)
Connecting as a Wiegand device
5 - WG D0 Green
6 - WG D1 White
7 - WG GND Black
Using as a Wiegand output device
Using as a Wiegand input device
Ex) Access controller Ex) RFID reader
BioLite Net BioLite Net
5
6
7 5 6
7 Wiegand Data 0
Wiegand Data 1
Wiegand Ground
Wiegand Data 0
Wiegand Data 1
Wiegand Ground
Door lock
Input 0
Door button
Door sensor
Input 1
Relay
18
19 17
Secure I/O 2
BioLite Net
17 - 485 GND White (Black stripe)
18 - 485 TRXP Blue (White stripe)
19 - 485 TRXN
Yellow (Black stripe)
Page 15
Product Specifications
15
Product Specifications
Category Feature Specification
Main
Biometric Fingerprint
IP Rating IP 65
RF Card 125KHz EM, 13.56MHz Mifare/DESFire
Multi-Controller Yes
Capacity
Max. User (1:1) 5,000
Max. User (1:N) 5,000
Max. Template (1:1) 10,000
Max. Template (1:N) 10,000
Max. Text Log 50,000
Interface
TCP/IP Yes
RS-485 1ch Host or Slave (Selectable)
Wiegand 1ch In or Out (Selectable)
TTL Input 2 Inputs
Relay 1 Relay
Relay
Voltage Max. 24VDC
Current Typ. 0.5A, Max. 1.0A
Hardware
CPU 533MHz DSP
Memory 16MB RAM + 8MB Flash
LCD 128 x 64 Graphic LCD (Mono)
LED Multi-Color
Sound Multi-tone Buzzer
Operating Temp. -20°C ~ 50°C
Tamper Yes
Power 12V
Dimensions (W x H x D mm) 60 x 185 x 40
Certification CE, FCC, KC, RoHS
Page 16
Product Specifications
16
Dimensions
Extension bracket
Diameter 4.5
Diameter 4.5
Diameter
3.5
Main bracket
Page 17
FCC Compliance Information
17
FCC Compliance Information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC rules.
Page 18
Appendix
18
Appendix
Disclaimers
• This document provides the information pertaining to Suprema's products.
• The right of use is granted only to the products that are covered by the sales agreement and conditions guaranteed by Suprema. Any
license of intellectual property that is not dealt within this document is not granted.
• Suprema does not provide any warranty or liability of fitness or merchantability for a particular purpose and of infringement of patents,
copyrights, or other intellectual properties, regarding the sales or use of Suprema's products.
• Do not use Suprema's products in either circumstances where people could be hurt or die as a consequence of malfunctions of the
products or circumstances related to medical treatments, the rescue of lives, or life supports. If a user suffers an accident in one of the
circumstances mentioned above, employees, subsidiaries, branches, partners, and distributors of Suprema are exempt from liability
even when it is claimed that there is a significant fault in the design or production process, and also they are not liable for any direct or
indirect cost or expenditure including legal costs.
• Suprema can change the standard and specification of its products anytime without notice in order to improve the stability, functions,
or design of the products. Designers should keep in mind that the functions or explanations denoted as "to be implemented" or "not
defined" can be changed anytime. Suprema will implement or define such items in the shortest possible time, and will not accept any
liability for problems incurred including compatibility issues.
• Contact Suprema, sales representatives of Suprema, or local distributors in order to get the latest specifications before ordering
products.
Copyright Notice
Suprema has the copyright of this document. The rights of other product names, brands, and trademarks belong to individuals or
organizations who own them.
Page 19
www.supremainc.com
www.supremainc.com
Loading...