2
3
Winch assembly with roller fairlead (no wire rope) 1 1 1 1
Winch assembly with roller fairlead (with wire rope) 1 1
Bolts, nuts, lockwashers 2 ea. 2 ea. 2 ea. 2 ea. 2 ea. 2 ea.
Flat washers 4 ea. 4 ea. 4 ea. 4 ea. 4 ea. 4 ea.
Cable ties 5 5 5 5 5 5
Owner’s Manual 1 1 1 1 1 1
Remote control switch 1 1 1 1
Without control switch 1 1
Circuit breaker assembly 1 1 1 1
Pulley block assembly 1
Handsaver 1 1 1 1 1 1
Internal solenoids 111
External solenoids 1
12 Volt Motor 1 1 1 1 1
24 Volt Motor 1
The C1000 electric winch is for intermittent duty only. Motor cool-down time
is required. Can be mounted horizontally or vertically. Winch can be
utilized in a variety of lifting operations involving machinery, trucks, boats,
farm implements, etc. Equipped with DC motor, permanently lubricated/sealed
gear box, switch with harness assembly, handsaver, and pulley block.
For additional information, consult Specifications and Performance.
DESCRIPTION
UNPACKING
Electric Motor - 1.3 peak hp (0.9
kW) 12 Volt Permanent Magnet.
Gear Ratio . . . . . . . . . . . . . . . 159:1
Braking - A wrap spring brake will
support the load when power to
the motor stops.
Remote Switch - 12’ (3.66m) Hand
held pendant switch assembly with
interlocking reverse switch and trigger.
Working Load* . 1,000 lbs (454 kg)
Safety Factor . . . . . . . . . . . . . . 5:1
(*) Based on first layer performance.
SPECIFICATIONS
This equipment must be used as recommended by the
manufacturer. Failure to follow these recommendations
could endanger your life and/or cause property damage.
Please unpack carefully and read the instructions before beginning. Inspect
carefully for any damage that may have occurred during transit. Check for
loose, missing or damaged parts.
Quantity
Description 03000 03001 03002 03003 03005 03010