Superlux E10F User Manual

E10F

Subminiature Earset Microphone

General Description

The Superlux E10F is a professional subminiature earset microphone ideal
for speech and other applications. It offers higher gain before feedback than
lavaliere microphones. Delivering exceptional speech clarity, the E10F is
ideal for corporate presentations, houses of worship, A/V conferencing and
live sound reinforcement. Available in two color options, the E10F provides
outstanding clarity in an extremely comfortable, over the ear design.

Features

• Subminiature, omnidirectional cartridge offers superior speech clarity
and enhanced plosive protection with no proximity effect

• Model variations terminated with different connectors allow for
connectivity to a variety of wireless bodypack transmitters

• Extremely lightweight, comfortable, flexible design is stable and easy to
place over either ear

• Matte black and beige color options available

• Includes carrying case, t wo windscreens, two element covers, moisture

guard and collar clip

Model No. Color Connector

E10F/BE Beige

E10F/BK Black

E10FTQG/BE Beige

E10FTQG/BK Black

Terminated for Superlux VT 7 bodypack

transmitter using 3.5 mm (1/8”)connector

Terminated for Superlux VT 7 bodypack

transmitter using 3.5 mm (1/8”)connector

Terminated for Superlux UT2 bodypack

transmitter and Shure® wireless systems using

TA4F-type connector

Terminated for Superlux UT2 bodypack

transmitter and Shure® wireless systems using

TA4F-type connector

E10FTQG/BE & E10FTQG/BK for Superlux UT2 bodypack transmitter

Function Wire Color

Pin 1 Ground/Shield Shield

Pin 2 Bias + In Transparent

Pin 3 Mic Audi White

Pin 4 N/A N/A

E10F/BE & E10F/BK for Superlux VT7 bodypack transmitter

sleeve ring tip

Using With Other Bodypack Transmitters

When connecting the microphone to anything
other than a Superlux wireless bodypack, make
sure the device provides a regulated +5V

DC(100 μA minimum) through transparent color

wire.

Windscreen

• The included windscreen provides plosive
and wind protection.

• Fit windscreen over car tridge.

• To remove, simply lift windscreen over

capsule.

Wearing the Earset Microphone

Fit the earset over the ear with the ear
support piece placed behind the earlobe.
The wire extends over the ear to the tip
of the mouth. Adjust the earset with
small bends. Do not bend the boom arm
beyond 20°.

Function Wire Color

Sleeve Ground/Shield Shield

Ring Bias Transparent

Tip Mic Audio White

13mm
(.5 in.)

Specifications

• Transducer Type: Electret Condenser

• Polar Pattern: Omnidirectional

• Frequency Response: 20 - 20,000 Hz

• Sensitivity (open circuit voltage, @ 1 kHz, typical) : -37dBV/Pa

• Maximum SPL: 110 dB SPL, 1500 Ω load, 1 kHz at 1% THD

• Signal-To-Noise Ratio: 77 dB

• Current Consumption: 0.1 mA typical@5V

• Self Noise (equivalent SPL, A-weighted, typical): 17 dB

• Voltage Range: +1.5 - 5 V DC

• Weight: 2.5 g (0.09 oz)

• Dimensions:
Microphone: 6 mm (0.24”) long; 4 mm (0.16”) diameter
Boom: 98.5 mm (3.88”) long; 1 mm (0.039”) boom diameter

• Cable Length: 1.4 meter (4.59 ft)

Furnished Accessories

• Two windscreens

• Collar clip

• Moisture guard

• Carrying case

Frequency Response Chart

Notice: Specifications are subject to change without notice. For more information,
please visit www.superlux.com.tw

P/N: LB100E10F02SU 2014 JAN