Sunstech Kids 9 QC 8GB User Manual
KIDS9QC 8GB
User Manual
Device description
1. Front Camera : You can take photos and videos etc.
2. Touch panel .
3. Press for more then 2 seconds to turn ON/OFF.Press
once to turn on screen from sleep mode .
4.
HOME
5.
Micro USB / OTG, charging
6. Earphone jack: 3.5mm standard earphone jack.
7. DC In 5V
8. Micro SD card slot.
9. MIC
10. Rear camera : You can take photos and videos etc
11. Speaker
TIPS
【
】：
1. When the batteryis low, it will power off automatically.
2. When you restart, device will scan and repair the disk . The
screen will display the progress bar for a short time
3. Definition of “Press”:
Short Press: Press the button less than 2 seconds.
Long Press: Press the button more than 3 seconds.
SUNSTECH KIDS APPLICATION MANUAL
SUNSTECH KIDS APPLICATION IS PROTECTED BY A SAFETY PIN FOR PARENTAL
CONTROL. IN THIS WAY, CHILDREN CAN NOT CHANGE SETTINGS OR OPTIONS
PERFORMED PREVIOUSLY BY PARENTS. THE CODE IN ALL CASES WILL ALWAYS BE
“4321”.
TO START THE SUNSTECH KIDS APPLICATION, CLICK THE GREEN ICON TO FIND YOUR
DESK OF SUNSTECH TABLET:
ONCE INSIDE THE APPLICATION APPEARS THE SUNSTECH KIDS DESK, YOU CAN
ENTER THE DIFFERENT GAMES AND APPLICATIONS CLICKING ANY OF THEM:
YOU C AN CONFIGURE MUTIPLE “OPTIONS” OF SUNSTECH KIDS CLICKING THE ICON
OF THE 3 DOTS(WHERE INDICATE THE ARROW)
BY CLICKING THE “OPTIONS”(3 DOTS), A MENU WITH SEVERAL POSSIBILITIES TO SET
SUNSTECH KIDS IS DISPLAYED:
THE OPTION “SELECT APPLICATIONS”(REMEMBER THAT THE SAFETY PIN ALWAYS IS
“4321”), APPEAR 2 TABS:
THE FIRST ONE: “SELECT APPLICATION”, APPEAR ALL THE APPLICATIONS INSTALLED
ON THE TABLET. THE SECOND TAB: “APPLICATIONS SELECTED”, APPEAR ALL THE
APPLICATIONS SELECTED TO USE IN THE SUNSTECH KIDS APPLICATION.
APPLICATIONS SELECTED IN THE TAB “SELECT APPLICATION” ARE ADDED
AUTOMATICALLY ON THE SUNSTECH DESK.
THE NEXT BUTTON ON THE MENU “OPTIONS” IS: “CONFIGURATION”
IN THE “CONFIGURATION”WE FIND SEVERAL OPTIONS OFTHE APPLICATION:
BELOWWE WILL EXPLAIN EACH OPTION:
1. START LOCK BUTTON: LOCK THE ST A R TBUTTON AND OTHERS(INSIDE THE CIRCLE). IN THIS
WAY,THE CHILDREN CAN NOT LEAVE FROM THE SUNSTECH KIDS.
2. AUTO RESET APPLICATIONS: THIS OPTION RESETTHE GAME, IF THE CHILDREN LEAVE FROM
IT.
3. PLAY STORE LOCK: LOCK ACCESS TO THE PLAY STORE OF APPLICATIONS IN THE
SUNSTECH KIDS.
4. AIRPLANE MODO: ACTIV ATE THE AIRPLANE MODO, DISCONNECT THEWIFI AND ANY OTHER
CONNECTION“IF THE DEVICE IS PREPAREDWELL”.
5. ALLOWTHE CONNECTION TO INTERNET:CONNECT OR DESCONNECT THE WIFI.
6. KEEPTHE HOME SCREEN: IF ACTIVATETHE OPTION,THE SCREENWILL NEVER SWITCHED
OFF.
7. START IN THE RESET OFTHE DEVICE: IF TURN OFF THE TAB LETRUNNING THESUNSTECH
KIDS,WHEN RETURNTOSTART,THETABLETWILL ENTER AUTOMATICALLYTHE SUNSTECH
APPLICATION.
8. ICONSIZE INTHE HOME SCREEN: YOU CANCHOOSE THE ICON SIZE OF THE APPLACATIONS.
9. TEXT SIZE IN THE MAIN SCREEN: YOU CAN CHOOSE THETEXT SIZE.
10. SHOW STATUS BAR: CONNECT OR DISCONNECT THE STATUS BAR (CLOCK, BATTERY, ETC.)
11. VOLUME CONTROL LOCK: CONNECT OR DISCONNECT THE VOLUM CONTROLBUTTONS.
12. CHANGE VOLUME: AJUST THE VOLUME IF ALL THE BUTTONS ARE LOCKED.
APPLICA TION IS LOCKED AUTOMATICALLY AND NEED TO INTRODUCE THE PIN
PARENTAL “4321” .
NOTE:
IF ONCE THE LOCK TIME INDICATED IS OUT, TURN OFF THE TABLET LOCKED,
WHEN RETURN TO START, WILL START DIRECTLY THE SCREEN LOCK. IF YOU DON’T
INTRODUCE THE PIN “
”, THIS WILL KEEP LOCKED.
4321
THE NEXT POSSIBILITY ONTHE MENÚ“OPTIONS” IS: “
TIMER
”
IN “TIMER” YOU CAN SELECT THE USE TIME IN MINUTES TO LOCK SUNSTECH KIDS.
THIS OPTION IS VERY HELPFUL WHEN YOU WANT TO INDICATE A MAXIMUM TIME SO
THAT THE CHILD USE THE TABLET. WHEN REACH THE TIME SELECTED, THE
THE NEXT OPTION IS: “
WALLPAPER
”:
YOU CAN SELECT THE WALLPAPER OF: WALLPAPER PREARRANGED OF SUNSTECH
KIDS, SELECT FROM YOUR PHOTO GALLERY OR DISCONNECT THE WALLPAPER OF
SUNSTECH KIDS.
THE NEXT MENU OFTHE “OPTIONS” IS“
THIS OPTION IS USED TO CLOSE ANY APPLICATION OPEN, UPDATE THE
APPLICATIONS SELECTED WITHIN THE SUNSTECH KIDS, FOR EXAMPLE, IF YOU HAVE
UNINSTALLED ANY APPLICATION OUT OF THE SUNSTECH KIDS.
REFRESH
”:
THE LAST TAB OF MENU “OPTIONS”IS “HELP”. THERE YOU WILL FIND SOME TIPS AND
QUICK GUIDE ONTHE APPLICATION SUNSTECH KIDS.
TO EXIT THE APPLICATION, YOU CAN CHOOSE THE OPTION “EXIT” LOCATED IN THE
TOP RIGHT PART:
TO EXIT REMEMBER TO INTRODUCE THE PIN“4321” AND NEXT THE HOME BOTTON.
SOON YOU WILL RECEIVE UPDATES AND IMPROVEMENTS. AND NEXT RECEIVE A
NOTICE IN THE NOTIFICATION BAR. YOU CAN ONLY MAKE ANY UPDATES OUT OF THE
SUNSTECH KIDS APPLICATION IN THE NORMAL STATUS OF THETABLET.
FOR ANY DOUBT, CONSULT OR SUGGESTION FOR IMPROVEMENT, YOU CAN SEND
EMAIL TO:
sat@sunstech.es
Setting up for the first time
Charging your device
For first-time use, you need to charge the device for six hours.
After that you can recharge the device as needed.
Connect the DC-in jack to your device and plug the AC adapter into any AC outlet.
Also, you can c harge the unit through of the micro USB.
TIPS】:
【
1. This device adopts built-in polymer battery. Only the specified charger should be
used.
2. It is normal for the device’s surface to become warm during charging or long
periods of use
3. If you do not use this set for a long time, please charge/release it once
one month to avoid deep discharge.
：
System Settings
Wireless & Network:
Wi-Fi-: Press Wi-Fi to turn ON/OFF
Wi-Fi settings:
Press Wi-Fi settings, then the device will automatically search the available
Wi-Fi signals.
Select the n etwork you want to connect with.
Display
:
Rotate screen setting
:
In the upper right of the screen, press and slide down .
Shows in the screen some direct settings.
Select enable /disable Auto Rotate screen.
Storage
Check device memory and microSD card memory.
Apps
Manage and listing of downloaded or running applications.
Language & input
1. Language: Users can choose OSD Languages.
2. KEYBOARD & INPUT METHODS: select language method.
【
Remark
Date & time
time” the device can obtain the actual date and time from the internet.
】：
: when the internet is connected , turn on “Automatic date &
:
In this state ,users can switch the input method .
Camera
Click “Camera” in the main interface.
If the cursor is at
Click
to take picture.
position, the device is at Camera mode.
Click to enter the setting interface
Click to more options.
Click to select back or front camera.
Click
If the cursor is in this
Click
to enter the mode select interface
position , the device is at DV mode.
to take picture.
Recovery mode for KIDS9QC 8GB
1.
In power off mode
following icon appear.
2. Press HOME key to select wipe data/factory and press the POWER key to select.
, keep holding the HOME and POWER key simultaneously till the
3. Press the HOME key to select YES-DELETE ALL USER DATA and POWER key
to confirm delete all user data.
4-Thescreenwillshowsomedata.Pleasewait.
5- Then it show “Reboot system now” , press the POWER key and the unit
will start doing the recovery.
.
Please,be patient.
It will be loading data.
Trouble shooting
• Can not power on:
--Connect the power cable to charge to the device, after a while you can try again.
--If it still can not power on, please contact with our distributor or service centre.
•Strangenoises:
--Check if the music file is damaged.
--If the music files are damaged, it may cause serious noise and the sound can be affected.
• Can not download or copy:
--Check if the connection between the device and the Pc is correct.
--Check the spare space of the memory.
--Check the USB cable.
• USB error
--Make sure that the USB d evice is securely connected to the USB jack.
--Check if the USB device or cable is damaged.
--If the USB device is connected via a USB hub, connect the USB device directly to the device.
• Cannot connect the device to the wireless LAN router
--Check if the wireless LAN router is on.
--Depending on the surrounding environment, such as the wall material, radio wave receiving condition, or obstacles between the device
and the wireless LAN router, the communication distance is lower. Move the device and the wireless LAN router closer to each other.
--Devices that use a 2.4GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt the communication.
Move the device away from such devices, or turn off such devices.
Resetting the device:
You may have to perform a reset if your device, not respond correctly.
If your device does not respond through touch panel or this blocked.
You can do the recovery mode the device.
：
：
How to download the software using the unit KIDS9QC
IMPORTANT:When you download the software, all data will be deleted such as photos, videos and Apps that you have installed
Do not interrupt this process please make sure the battery is fully charged.
Please, follow these steps.
1-
Open browser and search and open this link:
2-
Select the model of the tablet that you have and download the software.(This software is installed on the INTERNAL SD).
3-
When the download is finished ,select the App "
http://www.sunstech.es/download/
Sunstech Update
"inyourunit.
.
4-
Select
In the download paragraph , select the software and wait until the process is finished
5-
"Local Update"
and after select
"Download".
.
6-
After appears the follow image
7-
Select “Update”to install the update.
The unit will start with the installation process. “
PLEASE WAIT , THIS PROCESS MAY LAST FOR A FEW MINUTES
”
You mayreceive a messageautomaticupgradeoralso can toknowifexist an automaticupdate
How to use the automatic update "OTA".
1
- If receive an automatic update, follow these steps.
2-
In top left press and slide down and will see a drop down with the upgrade.
3-
After selec t the Update warning appears this new image.
4-
To update select Download or exit if you want not update.
5-
To update select Download .
When it reaches the end of the bar indicator means that the software this downloaded in the unit.
6-
Select Update right now and appears the follow image.
7-
Select “Update”to install the update.
The unit will start with the installation process. “
PLEASE WAIT , THIS PROCESS MAY LAST FOR A FEW MINUTES
”
1-
Select the icon “
Sunstech update
How to use the manual update "OTA".
” installed on the tablet and appear the follow image.
2-
Select
3
-In case of exist an update follow the steps in the section “
Online Update
to see if there is any upgrade.
Howtousetheautomaticupdate"OTA"
from step3.
4-
In case doesn’t exist any update appears the follow image.
YOUR VERSION IS THE LATEST
Product Specification
OS
CPU
Android 4.4.2
Allwinner A33 Cortex-A7 Quad-Core 1.3 G + Mali 400
System RAM 1GB DDRIII
Memory 8GB NAND Flash + SD up to 32GB
LCD 9" 800*480 LED-Backlight panel
Battery 4500 mAh
Touch Panel Multi-point Capacitive touch screen
WIFI 802.11 b/g/n
Ethernet LAN Yes
USB dongle
（
）
Gravity 3D gravity sensor
Camera Front 0.3MBpixels / Rear 2MBpixels
Music format
Video format
MP3,WMA,MP2,OGG,AAC,M4A,MA4,FLAC,APE,3GP,WAV
AVI
H.264, DIVX, DIVX, XVID, rm, rmvb, MKV（H.264, DIVX, DIVX, XVID), WMV, MOV, MP4（H.264,
（
MPEG, DIVX, XVID
, MPEG, MPG, FLV（H.263，H.264
）
）
Multiuser
YES
Picture format JPEG, BMP, GIF,PNG
Made in China
Specifications are for reference, to prevail in kind
EUROPEAN WARRANTY
k
k
k
1. General
This warranty is granted without prejudice and in addition to the recognized rights for the consumer vis-à-vis the seller provided in
the Royal Legislative Decree of 16 November, approving the restated text of the General Law for the Protection of Consumers and
Users and other complementary legislation. Therefore, the recognized legal rights for the consumer are not limited or excluded
according to the relevant Regional, National or European legislation.
This warranty shall be valid in all the European Union Member States with the limitations that legally correspond in the country in
which they are intended to be implemented in accordance with their implementing legislation.
Notwithstanding the foregoing, SUNSTECH shall respect the rights and limitations related to the product warranty that legally
correspond in each of the States listed in the Attachment in accordance with their implementing legislation for any product provided
that it is intended for the EU market and has been purchased or used by the consumer or user within the EEA.
2. Legal Warranty
This SUSTECH product has a two (2) year warranty counting from the date of delivery and/or purchase. During the above timeframe,
SUNSTECH shall be held responsible for any lack of conformity of the product in relation to the contract in accordance with the
provisions of the Law for the Protection of Consumers and Users, that shall entitle the consumer to request the repair or replacement
of the product, unless one of these options is objectively impossible or disproportionate.
Accordingly, the remedy (i.e. the repair or replacement) shall be deemed to be disproportionate if it imposes unreasonable costs on
the seller. In order to determine this, the following shall be considered: (i) the value of the product if there were no lack of conformity;
(ii) the relevance of the lac
of conformity; and (iii) if the other form of remedy could be carried out without major inconvenience to
the consumer and user.
To determine whether the costs are unreasonable, the costs incurred by one form of remedy must be significantly higher than the
costs corresponding to the other form of remedy.
In addition, the consumer may choose between requesting a reduction in the price or terminating the contract, if he is not entitled to
demand the repair or replacement of the product and whenever these actions would not be completed within a reasonable
timeframe and would cause more inconvenience to the consumer and user. However, the termination shall not take place where
the lac
Both the repair and the replacement of the product as result of the product’s lac
of conformity is minor.
of conformity shall be free of charge for the
consumer and user, including labour and materials.
In any case, repairs under warranty shall be carried out by SUNSTECH’s Official Technical Assistance Service or its authorized
distributors.
3. Conditions for the warranty to be exercised
To exercise the legal and commercial warranty, it is necessary to submit documentary evidence showing the delivery and/or
purchase date of the product, whether the invoice, receipt, delivery slip or sealed and dated warranty card. Documents which have
been tampered with or falsified will not be accepted.
The consumer shall contact SUNSTECH’s Customer Service Team using the website (under the support section) and will be informed
about what action to take. At that time, the consumer shall have to provide a clear description of the malfunction or the lack of
conformity of the product with the contract.
In any case, repairs under the warranty shall be carried out by SUNSTECH’s Official Technical Assistance Services or its authorized
distributors so that SUNSTECH can be held responsible under the legal and/or commercial warranty.
4. Exceptions
The warranty does not foresee or include periodic maintenance or product installation revisions.
In addition, the product will not be considered as lacking conformity in relation to the contract and therefore, it will not be covered
by the legal or commercial warranty when:
•
The lackof conformity corresponds to a discrepancy with the safety standards or the local or national techniques of a different
country to the one it was originally designed and produced in;
•
This product or any of its identification features (number of series, etc.) have been partially or completely opened, assembled,
unassembled, handled and/or repaired by a person not part of SUNSTECH’s Official Technical Assistance Services team or its
authorized distr ibutors
•
The lack o f conformity is a result of an incorrect installation (except if the installation has been carried out by one of SUNSTECH’s
authorized sellers or under its responsibility, or by the consumer following SUNSTECH’s installation instructions) or an abusive or
inadequate use of the product, including but not limited to, a usage that is not in accordance to the normal purpose of the
product or the directions for use and maintenance, as defined by SUNSTECH;
•
The lack of conformity has been caused by a computer virus, an action or a manipulation of passwords, software installation,
manipulation or reinstallation, etc.;
•
The lack of conformity is due to the use of accessories, chargers or consumables that are not SUNSTECH originals and therefore
are not designed for that product;
•
Forf
The lack of conformity is due to the use of any third party software or application that modifies, changes or adapts the software
that was approved and/or included by SUNSTECH in the product;
•
The lackof conformity is a result of downloading or using third party multimedia services and/or contents available or accessible
through the product;
•
Damages in or through the battery, which are due to it being overcharged, are produced;
•
Any of the box seals or battery cells have been damaged, or there is clear evidence that shows these were handled; and/or
•
The product damages are caused by any unforeseeable or force majeur circumstances, especially, lightning, water, fire, applying
incorrect voltage or any other cause that is not due to the product manufacturing or design.
Under no circumstances will SUNSTECH be held responsible for the loss of any data stored in the product. The consumer will be held
responsible for any back-up copies and the protection of any data from loss, damage or destruction.
None of the warranties included here cover the replacement of parts, due to ware or rupture of mechanisms, rubber, boxes and/or plastic, as
well as any aesthetic damage resulting from the normal use of the product, for example, if the screen loses its shine with the use of the
product. In the same way, the warranties do not cover any type of damage produced during the transportation of the product (including
but not limited to aesthetic damage, blows, lines, scratches, stains, dents, etc.) in which case the applicable provisions under SUNSTECH’s
general contract conditions will apply.
urtherinformationgotowww.sunstech.com
You can also contact:
AFEX SUNS, S.A.
Pallars, 189-191
08005 BARCELONA
SAFETY AND PRECAUTION WARNINGS
This product can be adjusted to the SAR national limits of 2 W/Kg. The
specific SAR maximum values are in the information section of this
guide.
When you hold the product or use it on your body, maintain a distance
of 1.5 cm from your body to ensure the radiofrequency exposure
www.sar-tick.com
This device offers communication and entertainment services that follow SUNSTECH’s high standards and technological experience.
•
The content may differ from the final product of the software provided by the suppliers of services or transmitters and it is subject to alteration without prior
notice.
•
The elements that come with the device and any available accessory may vary according to the region or supplier of the services.
•
The elements provided are designed uniquely for this device and may not be compatible with other devices.
•
You may purchase additional accessories at your local SUNSTECH distributor. Ensure that they are compatible with the device before you purchase them.
•
Other accessories may not be compatible with the device.
•
SUNSTECH is not held responsible for problems of insufficient return or any change to the operating system’s software. Any attempt to personalize the
operating system may cause the device or the applications to function incorrectly.
Instruction icons
standards.
Warning
parties.
: Situations that can cause injuries to yourself or third
Precaution
other equipment.
: Situations that can cause damages to the device or
Note:
Notes, recommendations of use or additional information.
Copyright
Copyright 2013 Afex suns, S. A.
This guide is protected by international copyright laws.
Reproduction, distribution, translation or transmission of any part of this guide is not allowed under any circumstances or through any means, be it electronic or
mechanic. This includes photocopies, records or storage in any information retrieval and storage systems, without previous written authorization from Afex Suns,
S. A.
Safety information
This section contains safety information for mobile devices. Some of the content may not apply to your device. In order to avoid injury to yourself or
third parties or damage to the device, read the device’s safety information before you use it.
Warning
If you do not comply with these safety regulations and warnings, you may suffer serious injury or even death.
Do not use damaged power cords or connectors or loose sockets.
Unsafe connections may cause an electric discharge or a fire.
Do not touch the power cord if your hands are wet and do not pull the cord to disconnect the charger.
Ifyoudoso,youmaybeelectrocuted.
Do not bend or damage the power cord.
Ifyousodo,thismaycauseanelectricdischarge.
Do not cause a short-circuit in the charger or the device.
Ifyoudoso,thismaycauseanelectricdischargeorthedevicemaynotfunctioncorrectly.
Use batteries, chargers, accessories and supplies that have been approved by the manufacturer.
•
The use of generic batteries or chargers may shorten the useful life of the device or cause incorrect functioning. It may also cause a fire or the battery
may explode.
•
Only use batteries or chargers that have been approved by SUNSTECH, specifically designed for the device. Any non compatible batteries and chargers
may cause serious physical injuries or damage the device.
•
SUNSTECH will not be held responsible for the safety of the user whenever accessories or supplies that have not been approved by the brand are used.
Do not cut or drop the charger or the device.
When handling or disposing of the device and charger do so with caution.
•
Never throw the battery or the device into the fire. Never place the battery or the device on any sources of heat, such as, ovens, microwaves, glasshouses
or radiators, etc. If it overheats, the device may explode. Follow all local regulations with regards to disposing of the used battery or device.
•
Do not squash the device or make holes in it.
•
Avoid exposing the device to high pressure because this may cause an internal short-circuit and overheating.
Protect the device, battery and charger in order to stop them from getting damaged.
•
Avoid exposing the device and battery to very high or very low temperatures.
•
Extreme temperatures may damage the device and reduce the charging capacity and the duration of the device and battery.
•
Avoid the battery entering into contact with metal objects because this may cause a connection between the positive and negative terminals of the
battery and damage it temporarily or permanently.
•
Never use damaged chargers or batteries.
Do not store the device in or near heaters, microwaves, heated kitchen equipment or high pressure containers.
•
The battery may have leakages.
•
The device may overheat and cause a fire.
Do not use or store the device in places with a lot of dust or material transported by air.
Dust or foreign materials may cause the device to malfunction and may result in a fire or an electric discharge.
Safety information
Do not bite or suck the device or the battery.
•
This may damage the device or cause an explosion or a fire.
•
Children and animals may choke on small pieces.
•
When children use the device, ensure that they do so correctly.
Do not insert the device or the accessories provided into your eyes, ears or mouth.
If you do so, you make choke or suffer serious injuries.
Do not handle damaged lithium-ion batteries or batteries that show evidence of leakage.
To dispose of lithium-ion batteries safely, contact your closest authorized service centre.
PLUGGABLE EQUIPMENT: the socket-outlet shall be installed near the equipment and shall be easily accessible.
Precaution
If you do not comply with these regulations and warnings, you may suffer injuries or cause material damage.
Do not use the device near other electronic devices.
•
Most electronic devices use radiofrequency signals. The device may interfere with other electronic devices.
•
If you use a LTE data connection, this may cause an interference with other devices, such as audio equipment and telephones.
Do not use the device in a hospital, plane or car that may be affected by interference caused by radiofrequency.
•
If possible, avoid using the device at any distance lower than 15 cm from a pacemaker, because the device may cause interferences with it.
•
Tominimizeanypossibleinterferencewithapacemaker,usethedeviceonly on the opposite side of the body in relation to the position of the
pacemaker.
•
If you use medical equipment, contact the manufacturer of the equipment before using the device in order to ascertain whether the equipment will be
affected by the radiofrequency emitted by the device.
•
If electronic devices are used on a plane, these may interfere with the electronic navigation instruments. Ensure that the device is turned off during
take-off and landing. After take-off you may use the device on “airplane mode” as long as this is allowed by the cabin crew.
•
The electronic devices in your car may malfunction due to the radio interference of the device. Contact the manufacturer for further information.
Do not expose the device to smoke or strong emanations.
Ifyoudoso,youmaydamagetheoutsidepartofthedeviceorcauseitsmalfunctioning.
If you use hearing devices, contact the manufacturer for further information about radio interference.
The radiofrequency that the device emits may interfere with some hearing devices. Before using the device, contact the manufacturer in order to ascertain
whether the hearing device will be affected by the radiofrequency emitted by the device.
Do not use the device near other devices or apparatuses that emit radiofrequency, such as sound systems or radio towers.
Radiofrequency may cause the malfunctioning of the device.
Turn off the device in potentially explosive atmospheres.
•
Turn off the device instead of removing the battery in potentially explosive atmospheres.
•
Always respect the standards, instructions and warning signs in potentially explosive atmospheres.
•
Do not use the device in petrol stations or near fuel or chemicals or in demolition areas.
•
Do not store or transport flammable liquids, gases or explosive material in the same compartment in which the device, its parts or accessories are.
If you become aware of the device or the battery letting off strange odours or sounds or if you see smoke or liquid coming out of the device or battery,
Loading...