Sunstar KM-2070 Manual

AArm, Bed & Machine Body Parts Arm, Bed

A-50

A-47

A-25

A-27

A-26

A-50

A-31

A-30

	A-32
A-52
	A-53
A-37	A-37
4	A-36
A-35
A-39

A-38

A-33

A-13

	A-15
	A-17
	A-14
A-19
A-20	A-16
A-18	A-16

A-25

A-24

A-31

A-47

A-34

A-6, 7

A-8

A-10

A-10

A-23

A-28

A-16

A-49

A-47, 49

A-16

A-5

A-3

A-9 A-11

A-12

A-21

A-22

A-16

A-16

A-48

A-47

A-1, 2

A-41

A-40 A-43

A-42

A-46

A-4

A-29

A-51

A-44

A-45

A-45

From the library of: Superior Sewing Machine & Supply LLC

Ref. No.	Parts No.	Note	Name of Parts					Q’ty				Assembly
						7L	L			7M	M	No.
A-1	01-001A-2077		Arm∙Bed	∙		1	∙			1	∙
A-2	01-001A-2070		Arm∙Bed	∙		∙	1			∙	1
A-3	01-005A-2070		Bed Base (F)	( )		2	2			2	2
A-4	01-005B-2070		Bed Base (R)	( )		1	1			1	1
A-5	01-006A-2077		Face Plate			1	∙			1	∙
A-6	01-005M-2070		Face Plate Gasket			1	1			1	1
A-7	01-007A-2070		Face Plate			∙	1			∙	1
A-8	01-008S-2070		Screw (9/64″n=40, ℓ=8)			8	8			8	8
A-9	01-009A-2070		Face Plate Mes			1	1			1	1
A-10	01-008S-2070		Screw (9/64″n=40, ℓ=8)			1	1			1	1
A-11	11-017S-7500		Nut (9/64″n=40)			1	1			1	1
A-12	01-026A-3800		Face Plate Thread Guide			1	1			1	1
A-13	01-014A-2070		Face Plate Guard			1	1			1	1
A-14	01-015C-2070		Face Plate Guard Cover			1	1			1	1
A-15	01-016C-2070		Cover Window			1	1			1	1
A-16	SC-0179-3710		Screw (11/64″n=40, ℓ=10)			6	6			6	6
A-17	SC-A320-4222		Screw (1/8″n=40, ℓ=4.3)			4	4			4	4
A-18	01-019S-2070		Stud Screw for A-14			1	1			1	1
A-19	40-007W-1600		Washer			1	1			1	1
A-20	01-021W-2070		Wave Washer			3	3			3	3
A-21	01-022C-2070		Face Plate Guard Cover Stopper			1	1			1	1
A-22	SC-0365-3710		Screw (9/64“ n=40, ℓ=5.5)	( )		1	1			1	1
A-23	01-024M-207P		Rear Cover Gasket			1	1			1	1
													5
A-24	01-025C-2070		Rear Cover			1	1			1	1
A-25	SC-0498-3710		Screw (11/64″n=40)			10	10			10	10
A-26	01-027M-2070		Top Cover Gasket			1	1			1	1
A-27	01-028A-2070		Top Cover			1	1			1	1
A-28	01-030R-2070		Cable Holder Rubber			1	1			1	1
A-29	01-038W-1230		Spring Washer			2	2			2	2
A-30	04-104R-1230		Rubber Cap for Arm Rear Part(S)	ARM ( )		1	1			1	1
A-31	44-021R-7400		Rubber Cap for Arm Upper Part	Arm		2	2			2	2
A-32	01-042R-640L		Rubber Cap for Arm Rear Part (L)	Arm ( )		1	1			1	1
A-33	01-007R-8130		Rubber Cap for Bed (M)	Bed ( )		1	1			1	1
A-34	44-018R-7500		Rubber Cap for Bed (S)	Bed ( )		1	1			1	1
A-35	01-437A-2070		Needle Plate(8mm)	(8mm)		1	1			1	1
A-36	01-038A-2070		Auxiliary Plate			1	1			1	1
A-37	SC-0505-3710		Screw (9/64″n=40, ℓ=7)	( )		4	4			4	4
A-38	01-040A-2077		Needle Plate Spacer	Spacer		1	∙			1	∙
A-39	01-041A-2070		Slide Plate			∙	1			∙	1
A-40	01-044M-207L		Model Sticker (7L)	(7L)		1	∙			∙	∙
A-41	01-045M-207L		Model Sticker (L)	(L)		∙	1			∙	∙
A-42	01-046M-207M		Model Sticker (7M)	(7M)		∙	∙			1	∙
A-43	01-047M-207M		Model Sticker (M)	(M)		∙	∙			∙	1
A-44	01-035P-1370		Machine Number Plate	( )		1	1			1	1
A-45	01-035P-7400		Pin for A-44			2	2			2	2
A-46			Caution Sticker			1	1			1	1
A-47	01-080R-9770		Cable Holder	(4N)		3	4			3	4
A-48	01-009R-2700		Cable Holder	(6N)		1	1			1	1
A-49	01-011C-2350		Cable Holder	(5N)		1	∙			1	∙
A-50	SC-0543-2302		Screw (11/64″n=40, ℓ=7.4)			2	2			2	2
A-51	SN-0122-5607		Nut(5/16”n=28)	(2)		2	2			2	2
A-52	01-064S-2070		Screw (5/16″n=24)			1	1			1	1
A-53	44-005R-1230		O-Ring	O		1	1			1	1

7L:KM-2070-7L L:KM-2070-L 7M:KM-2070-7M M:KM-2070-M

From the library of: Superior Sewing Machine & Supply LLC

BUpper Shaft Mechanism

B-32

B-33

B-31

B-4

B-4

B-4

B-4

B-30

6

B-28

B-29

B-1

B-8

	B-14
	B-7
	B-11
B-9	B-10
	B-15
	B-12
	B-12
	B-13
	B-6
	B-26
	B-24
	B-21

B-4

B-4

B-34

B-16

B-18

B-25

B-41

B-40

B-39

B-35

B-35

B-38

B-4 B-27

B-2

B-4

B-5

B-3

B-17

B-19

B-20

B-36

B-37

B-41

B-22

B-23

From the library of: Superior Sewing Machine & Supply LLC

Ref. No.	Parts No.	Note	Name of Parts					Q’ty				Assembly
						7L	L			7M	M	No.
B-1	02-101A-2070		Upper Shaft			1	1			1	1
B-2	02-120A-2070		Link Cam			1	1			1	1
B-3	SC-0183-2700		Screw	(B)		1	1			1	1
B-4	SC-A308-4517		Screw (1/4″n=40, ℓ=6)			8	8			8	8
B-5	SC-0153-7400		Screw (1/4″n=40, ℓ=8.5)	(B)		1	1			1	1
B-6	08-101A-2070		Thread Take Up Lever			1	1			1	1
B-7	08-002A-2070		Base for Thread Take Up Lever			1	1			1	1
B-8	08-003A-2070		Thread Take Up Lever Shaft			1	1			1	1
B-9	SC-0505-3710		Screw (9/64″ n=40, ℓ=7)	( )		3	3			3	3
B-10	08-005A-2070		Wiper Driving Notch			1	∙			1	∙
B-11	08-006C-2070		Wiper Notch Holder			1	∙			1	∙
B-12	08-007S-2070		Screw (9/64″n=40, ℓ=4)			2	∙			2	∙
B-13	04-101A-2070		Needle Bar			1	1			1	1
B-14	04-101A-2070		Needle Bar Holder			1	1			1	1
B-15	04-003S-2070		Screw			1	1			1	1
B-16	04-004A-2070		Needle Bar Crank			1	1			1	1
B-17	04-005A-2070		Needle Bar Holder Guide			1	1			1	1
B-18	04-006A-2070		Needle Bar Crank Guide			1	1			1	1
B-19	SC-0174-1230		Screw (11/64″n=40, ℓ=8)			2	2			2	2		7
B-20	SC-0179-3710		Screw (11/64″n=40, ℓ=8)			2	2			2	2
B-21	04-010C-2070		Needle Bar Stopper (8mm)	(A)		1	1			1	1
B-22	04-013A-2070		Needle Bar Stopper Plate			1	1			1	1
B-23	04-014S-2070		Screw (M4, ℓ=8)			2	2			2	2
B-24			Needle (SY1965 Nm70/10)	(SY1965 Nm70/10)		1	1			1	1
B-25	SC-A131-4522		Screw (1/8″n=44, ℓ=5.5)			1	1			1	1
B-26	04-017A-2070		Thread Guide for Needle Bar			1	1			1	1
B-27	07-019A-9570		Upper Shaft Bearing (F) (6202 ZZNR)			1	1			1	1
B-28	02-003A-2070		Upper Shaft Collar (M)	( )		1	2			2	2
B-29	02-004A-2070		Upper Shaft Bearing (M) (6004 ZZ)			1	1			1	1
B-30	02-006A-2070		Upper Shaft Timing Pulley			1	1			1	1
B-31	02-007C-2070		Side Ring			2	2			2	2
B-32	02-008A-2070		Timing Belt (UNITTA 600-5GT)			1	1			1	1
B-33	02-019A-2070		Upper Shaft Bearing (R) (6204 ZZNR)			1	1			1	1
B-34	02-011A-2070		Upper Shaft Collar (R)	( )		1	1			1	1
B-35	11-020A-2500		Magnetic Holder			2	2			2	2
B-36	11-022W-2500		Washer			2	2			2	2
B-37	11-021S-2500		Screw			2	2			2	2
B-38	12-0000-2070		Synchronizer	( )		1	1			1	1
B-39	11-024S-2500		Screw			2	2			2	2
B-40	02-018A-2070		Pulley			1	1			1	1
B-41	SC-0150-2500		Screw (15/64″n=28, ℓ=14.5)			2	2			2	2
B-42	SC-0188-1230		Screw (5/16″n=24)			1	1			1	1

7L:KM-2070-7L L:KM-2070-L 7M:KM-2070-7M M:KM-2070-M

From the library of: Superior Sewing Machine & Supply LLC

CPresser Foot & Knee Lifting Mechanism

C-1

		C-36
	C-33	C-30
C-30		C-37
C-19
C-23		C-34
		C-31
C-35

C-2

		C-24
	C-20	C-29
	C-21
	C-9	C-22
	C-5
		C-30
		C-26
		C-25
		C-27
	8	C-28
		C-27

C-32

C-15

C-3, 4	C-14

C-16

C-13

C-12

C-7

C-8

C-10

C-9

C-11

C-17-2

C-6

C-17-3

C-18

C-17-1

C-17

From the library of: Superior Sewing Machine & Supply LLC

Ref. No.	Parts No.	Note	Name of Parts					Q’ty				Assembly
						7L	L			7M	M	No.
C-1	SC-0339-1230		Presser Adjusting Screw	(9/16″n=20)		1	1			1	1
C-2	05-002C-2500		Nut (9/16″n=20)			1	1			1	1
C-3	05-003G-207L		Presser Spring (L)	( )		1	1			∙	∙
C-4	05-004G-207M		Presser Spring (M)	( )		∙	∙			1	1
C-5	05-005C-2070		Presser Spring Rod			1	1			1	1
C-6	05-106A-2070		Presser Bar			1	1			1	1
C-7	06-102W-2350		Washer			1	1			1	1
C-8	05-108A-2070		Presser Bar Bushing			1	1			1	1
C-9	SC-0164-2700		Screw (M5, ℓ=5)			2	2			2	2
C-10	05-010A-2070		Presser Bar Holder			1	1			1	1
C-11	SC-0179-3710		Screw (11/64″n=40, ℓ=10)			1	1			1	1
C-12	05-012A-2070		Presser Bar Lifting Cam Shaft			1	1			1	1
C-13	02-016R-1230		O-Ring (P4)	O-		1	1			1	1
C-14	43-001A-2500		Presser Bar Lifting Lever			1	1			1	1
C-15	SC-0528-1230		Screw (9/64″n=40, ℓ=10)	( )		1	1			1	1
C-16	02-019W-1230		Washer			1	1			1	1
C-17	05-017A-2070		Presser Foot (8mm)	( )-8mm		1	1			1	1
C-17-1	05-071C-2070		Finger Guard			1	1			1	1		9
												C-17
C-17-2	05-017S-2070		Screw (1/8 n=40, ℓ=10)			1	1			1	1
C-17-3	05-017G-2070		Presser Foot Stop Spring			1	1			1	1
C-18	SC-0315-2302		Screw (9/64″n=40, ℓ=9)			1	1			1	1
C-19	05-019A-2070		Spacer for Presser Adjusting Screw			1	1			1	1
C-20	43-001A-2070		Shaft for Presser Lifting Link			1	1			1	1
C-21	43-002C-2070		O-Ring (P3)	O-		1	1			1	1
C-22	43-004A-2070		Thread Tension Release Plate			1	1			1	1
C-23	43-005A-2070		Tension Release Connecting Rod			1	∙			1	∙
C-24	43-006S-2070		Stud Screw for C-23			1	∙			1	∙
C-25	40-007W-1600		Washer			1	1			1	1
C-26	43-008A-2070		Presser Lifting Link			1	1			1	1
C-27	05-014C-1230		E-Ring (ф4)	E-		2	2			2	2
C-28	43-010G-2070		Spring for Lifting Link Shaft			1	1			1	1
C-29	43-011C-2070		Presser Lifting Link Connecting Bar			1	1			1	1
C-30	43-012S-2070		Stud Screw for C-32			3	3			3	3
C-31	43-013A-2070		Knee Lifting Link			1	1			1	1
C-32	43-014A-2070		Knee Lifting Bar			1	1			1	1
C-33	43-015A-2070		Stud for Knee Lifting Link			1	1			1	1
C-34	43-016G-2070		Spring for Link Stud			1	1			1	1
C-35	SN-0101-1600		Nut (11/64″n=40)			1	∙			1	∙
C-36	43-035S-2070		Adjusting Screw			1	1			1	1
C-37	43-036S-2070		Nut (M6)			1	1			1	1

7L:KM-2070-7L L:KM-2070-L 7M:KM-2070-7M M:KM-2070-M

From the library of: Superior Sewing Machine & Supply LLC

DFeed Mechanism

D-19

D-20

D-23

10

D-69

D-60

D-13

						D-31
D-13	D-22	D-12			D-30
D-17					D-29
		D-24			D-28
	D-14, 15
D-18				D-27
					D-33
	D-16
			D-19
D-17			D-20		D-32
		D-22
	D-25
D-26 D-13				D-9	D-4
				D-8
D-26	D-26	D-1
D-34, 35	D-13
	D-26		D-10
				D-6	D-11
D-21
	D-17
				D-2
					D-5
D-83	D-13		D-9
		D-3		D-8
	D-36		D-10		D-11
			D-7
						D-67
			D-63		D-66
						D-67
					D-62
					D-67
					D-66
	D-65				D-67 D-64
D-82			D-54		D-55
					D-52
						D-39
					D-38	D-43
	D-61					D-40
							D-70
			D-56	D-57	D-39		D-41
						D-43
D-81	D-71
D-81					D-59	D-42
D-71	D-71				D-45
D-68							D-37
					D-58
		D-84
D-71					D-43
							D-70
					D-43
			D-79, 80		D-44	D-45
					D-26
	D-72				D-46
				D-78
		D-74, 75			D-48	D-47
					D-49

D-77

D-50

D-73	D-76	D-51	D-53

From the library of: Superior Sewing Machine & Supply LLC

Ref. No.	Parts No.	Note	Name of Parts					Q’ty				Assembly
						7L	L			7M	M	No.
D-1	06-001A-2070		Feed Regulator Dial Shaft			1	1			1	1
D-2	06-002A-207L		Condense Regulator Dial Shaft (L)	( )		1	1			∙	∙
D-3	06-003A-207M		Condense Regulator Dial Shaft (M)	( )		∙	∙			1	1
D-4	06-004A-207L		Feed Regulator Dial (L)	( )		1	1			∙	∙
D-5	06-005A-207L		Condense Regulator Dial (L)	( )		1	1			∙	∙
D-6	06-006A-207M		Feed Regulator Dial (M)	( )		∙	∙			1	1
D-7	06-007A-207M		Condense Regulator Dial (M)	( )		∙	∙			1	1
D-8	06-026P-1230		Dial Pin			2	2			2	2
D-9	06-027G-1230		Dial pin Spring			2	2			2	2
D-10	06-010R-1230		O-Ring	O-		2	2			2	2
D-11	SC-0193-1230		Screw (3/16″n=28, ℓ=12)			2	2			2	2
D-12	06-012A-2070		Feed Regulator Shaft Bushing			1	1			1	1
D-13	SC-0164-2700		Screw (M5, ℓ=5)			5	5			5	5
D-14	06-114A-207L		Feed Regulator (L)	( )		1	1			∙	∙
D-15	06-115A-207M		Feed Regulator (M)	( )		∙	∙			1	1
D-16	06-017A-2070		Feed Regulator Rod			1	1			1	1
D-17	06-018A-2070		Connecting Rod Shaft			3	3			3	3
D-18	06-020A-2070		Feed Regulator Shaft			1	1			1	1
D-19	06-031C-106L		Washer			2	2			2	2
													11
D-20	40-002C-2350		E-Ring (ф8)	E- (ф8)		2	2			2	2
D-21	06-128A-106L		Reverse Lever Shaft Bushing (F)	(DU 1020)		1	1			1	1
D-22	06-016A-2070		Reverse Lever Shaft Bushing (R)	(DU 1012)		2	2			2	2
D-23	06-025R-2070		Reverse Lever Shaft Rubber Cap			1	1			1	1
D-24	06-026A-2070		Reverse Lever Shaft			1	1			1	1
D-25	06-028A-2070		Feed Adjusting Lever			1	1			1	1
D-26	SC-A308-4517		Screw (1/4″n=40, ℓ=6)			5	5			5	5
D-27	06-032C-106L		Cover for Reverse Lever Shaft			1	1			1	1
D-28	SC-0211-7500		Screw (M4×P0.7, ℓ=8)			3	3			3	3
D-29	06-034G-106L		Reverse Lever Return Spring			1	1			1	1
D-30	06-061A-7507		Reverse Feed Lever			1	1			1	1
D-31	SC-0185-1230		Screw (3/16″n=32, ℓ=10)			1	1			1	1
D-32	06-036C-2070		Reverse Lever Stopper			1	1			1	1
D-33	06-040R-106L		Rubber for D-32			1	1			1	1
D-34	06-038A-207L		Condense Regulator (L)	( )		1	1			∙	∙
D-35	06-039A-207M		Condense Regulator (M)	( )		∙	∙			1	1
D-36	06-041P-2070		Eccentric Pin for Feed Regulator Shaft			1	1			1	1
D-37	06-043A-2070		Feed Regulator Shaft			1	1			1	1
D-38	06-044A-2070		Feed Regulator Shaft Connecting Rod			1	1			1	1
D-39	15-220A-7900		Slider Block			2	2			2	2
D-40	06-046A-2070		Slider Shaft			1	1			1	1
D-41	06-047C-2070		Guide Plate (A)	(A)		1	1			1	1
D-42	06-048C-2070		Guide Plate (B)	(B)		1	1			1	1
D-43	SC-0543-2302		Screw (11/64″n=40, ℓ=8)			6	6			6	6

7L:KM-2070-7L L:KM-2070-L 7M:KM-2070-7M M:KM-2070-M

From the library of: Superior Sewing Machine & Supply LLC

DFeed Mechanism

D-19

D-20

D-23

12

D-69

D-60

D-13

						D-31
D-13	D-22	D-12			D-30
D-17					D-29
		D-24			D-28
	D-14, 15
D-18				D-27
					D-33
	D-16
			D-19
D-17			D-20		D-32
		D-22
	D-25
D-26 D-13				D-9	D-4
				D-8
D-26	D-26	D-1
D-34, 35	D-13
	D-26		D-10
				D-6	D-11
D-21
	D-17
				D-2
					D-5
D-83	D-13		D-9
		D-3		D-8
	D-36		D-10		D-11
			D-7
						D-67
			D-63		D-66
						D-67
					D-62
					D-67
					D-66
	D-65				D-67 D-64
D-82			D-54		D-55
					D-52
						D-39
					D-38	D-43
	D-61					D-40
							D-70
			D-56	D-57	D-39		D-41
						D-43
D-81	D-71
D-81					D-59	D-42
D-71	D-71				D-45
D-68							D-37
					D-58
		D-84
D-71					D-43
							D-70
					D-43
			D-79, 80		D-44	D-45
					D-26
	D-72				D-46
				D-78
		D-74, 75			D-48	D-47
					D-49

D-77

D-50

D-73	D-76	D-51	D-53

From the library of: Superior Sewing Machine & Supply LLC

Ref. No.	Parts No.	Note	Name of Parts					Q’ty				Assembly
						7L	L			7M	M	No.
D-44	07-252A-5607		Collar for D-37			1	1			1	1
D-45	SC-0317-2700		Screw (15/64″n=28, ℓ=7.5)			2	2			2	2
D-46	06-053A-2070		Feed Cam			1	1			1	1
D-47	SC-A117-4417		Screw (1/4″n=40, ℓ=8.5)			1	1			1	1
D-48	06-056A-2070		Feed Cam Bearing	(FWF-222817)		1	1			1	1
D-49	06-057A-2070		Feed Cam Connecting Rod			1	1			1	1
D-50	06-058C-2070		Cover for D-48			1	1			1	1
D-51	SC-A301-4119		Screw (9/64″n=40)			2	2			2	2
D-52	06-060S-2070		Stud Screw for D-38			1	1			1	1
D-53	SN-0105-3400		Nut (15/64″n=28)			1	1			1	1
D-54	06-062A-2070		Feed Rock Crank			1	1			1	1
D-55	06-063S-2070		Stud Screw for D-54			1	1			1	1
D-56	SN-0107-1230		Nut (9/32″n=28)			1	1			1	1
D-57	SC-0343-3800		Screw (15/64″n=28, ℓ=17)			1	1			1	1
D-58	06-066C-2070		Feed Regulator Shaft Return Spring Holder			1	1			1	1
D-59	06-068G-2070		Feed Regulator Shaft Return Spring			1	1			1	1
D-60	06-069A-2070		Feed Rock Shaft Bushing (F)			1	1			1	1
D-61	06-070A-2070		Feed Rock Shaft Bushing (M)			1	1			1	1
													13
D-62	06-071A-2070		Feed Rock Shaft Bushing (R)			1	1			1	1
D-63	06-072A-2070		Feed Rock Shaft			1	1			1	1
D-64	SC-0110-1230		Screw (15/64″n=28, ℓ=4.5)			1	1			1	1
D-65	01-112R-1230		Feed Rock Shaft Rubber Cap			1	1			1	1
D-66	06-075A-2070		Collar for D-63			2	2			2	2
D-67	SC-A117-4417		Screw (1/4″n=40, ℓ=9)			4	4			4	4
D-68	06-077A-2070		Feed Rocker Bracket			1	1			1	1
D-69	06-078A-2070		Feed Rocker Bracket Eccentric Shaft			1	1			1	1
D-70	06-033M-7400		Felt for D-37			4	4			4	4
D-71	SC-0179-3710		Screw (11/64″n=40, ℓ=10)			4	4			4	4
D-72	06-081A-2070		Feed Base			1	1			1	1
D-73	06-082P-2070		Eccentric Pin for D-72			1	1			1	1
D-74	06-083A-2077		Feed Base Connecting Rod	( )		1	1			1	1
D-75	06-084A-2070		Feed Base Connecting Rod	( )		1	1			1	1
D-76	SC-0307-1230		Screw			1	1			1	1
D-77	11-017W-2700		Washer			1	1			1	1
D-78	SC-A297-4118		Screw (1/8″n=40, ℓ=6)			1	1			1	1
D-79	06-088A-207L		Feed Dog (2.5mm)	(2.5mm)		1	1			∙	∙
D-80	06-089A-207M		Feed Dog (5mm)	(5mm)		∙	∙			1	1
D-81	06-090W-2070		Washer			2	2			2	2
D-82	06-091M-2070		Felt for D-69			1	1			1	1
D-83	06-092A-2070		Condense Regulator Rod			1	2			2	2
D-84	SC-A306-4113		Screw (1/8″n=44, ℓ=8)			2	2			2	2

7L:KM-2070-7L L:KM-2070-L 7M:KM-2070-7M M:KM-2070-M

From the library of: Superior Sewing Machine & Supply LLC

ELower Shaft Mechanism

			E-11	E-12
			E-9
		E-14	E-10
				E-12
		E-13		E-11
		E-8
		E-6
		E-7	E-42
		E-5
		E-11	E-15
			E-16
		E-8
			E-17
	E-20	E-4
		E-6		E-42
		E-42		E-11
E-3		E-11
			E-21
14		E-1, 2
	E-42			E-11
			E-19

			E-18
			E-11
	E-30	E-22
	E-29		E-42
	E-28
			E-23
			E-42
	E-27		E-11
		E-11	E-24
	E-40	E-25
	E-41	E-42	E-26
	E-37, 38	E-34
	E-39	E-11	E-31

	E-42	E-32
		E-33
E-35, 36

From the library of: Superior Sewing Machine & Supply LLC