Sunfire SRS-210-W Owners manual
Installation Instructions
SRS–210W-C Cabine
t
SRS–210W-B Baffle
SRS–210W-G Grille
User's Manual
Important Safety Instructions
1. Read Instructions
2. Keep these Instructions
3. Heed all Warnings.
4. Follow all Instructions
Safety
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including ampliers) that
produce heat.
8. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
9. Refer all servicing to qualied service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as a power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
10. Installation should only be performed
by qualied and experienced professional
installers. Refer to your Sunre dealer.
The SubRosa subwoofer is a nely
tuned system and should only be
used with the Sunre SRA-2700EQ
companion amplier. Using any other
amplier will offer inferior performance and
may void your warranty.
WARNING:THIS SUBWOOFER SYSTEM IS CAPABLE OF
PRODUCING VERY HIGH SOUND PRESSURE LEVELS. YOU
MUST TAKE EVERY PRECAUTION TO PROTECT YOUR
HEARING FROM PERMANENT DAMAGE.
2
User's Manual
Contents
Safety Instructions ............ 2
Introduction ...................... 4
Unpacking ........................ 5
Dimensions ...................... 6
Location ............................ 7
Framing ............................ 9
Cabinet installation ........... 10
Wiring ............................... 11
Final rough-in ................... 12
Horizontal mounting ......... 14
Bafe installation .............. 16
Grille installation ............... 18
Cabinet Bafe Install Grille Install
For more information on this and other Sunre
products, please visit our website:
www.sunre.com
3
User's Manual
Introduction
Thank you for purchasing this Sunre
SubRosa™ Subwoofer. We hope you
enjoy it and the music it makes as much
as we have enjoyed creating it for you.
The breakthrough features of the
subwoofer include:
Introduction
• I-BEAM™ anti-shake mechanism to
reduce wall vibration
• Dual ten-inch, High Back-emf woofers with neodymium magnets for
low-prole
• 2700W Tracking Downconverter™
companion amplier
• Fully automatic room equalization
The SubRosa subwoofer is a nely
tuned system and should only be
used with the Sunre SRA-2700EQ
companion amplier. Using any other amplier will offer inferior performance and
may void your warranty.
About this installation guide
This guide contains instructions for
installing the SubRosa in-wall cabinet into
various locations, and installing the front
bafe assembly, and the grille assembly.
For information regarding the operation of the system, please refer to the
user's guide that comes with the
companion SRA-2700EQ amplier.
System components
The required components for a func-
tioning SubRosa in-wall system are:
• SRS-210W-C
In-wall cabinet and hardware.
• SRS-210W-B
Front bafe containing two woofers,
the I-BEAM™ anti-shake device,
and a crossover network.
• SRS-210W-G
Grille assembly
Tools and experience
required
The cabinet should only be
installed by qualied and experienced professional installers.
General construction tools are required
for framing wood studs, gluing and
screwing the cabinet in place, and applying sheetrock.
4
• SRA-2700EQ
Amplier and its room equalization
measurement microphone
User's Manual
Installation overview
The cabinet may be mounted vertically
between wall studs. The width is ideal for
tting between vertical 2x4 studs, spaced
16 inches apart. It may also be tted
horizontally.
A cardboard debris shield is supplied
to ll the front aperture and prevent any
dust, paint, or debris from entering during
installation and sheetrock nishing.
Strips of foam material are supplied to
t between the cabinet and the studs and
sheetrock.
The cabinet should be rmly and
permanently joined to the studwork and
sheetrock using woodscrews and glue.
The woofer bafe assembly is screwed
to the front of the cabinet once the sheetrock is in place. A grille frame and grille
are added to nish the installation. A paint
shield is supplied so that you can easily
paint the grille at the same time as the
walls are painted.
Unpacking
Two people are required to gently lift out
the cabinet and the bafe assembly from
their shipping boxes. Remove all the
packing material.
Your Sunre subwoofer should reach
you in perfect condition. If you do notice
any shipping damage, please contact
Sunre immediately. Make sure that you
keep your sales receipt. It is the only way
to establish the duration of your Limited
Warranty and it may come in useful for
insurance purposes.
The serial number for the SubRosa
subwoofer is printed on the front label of
the woofer assembly.
Contents of each package
SRS–210W-C cabinet
• Cabinet assembly
Dimensions 44.50" x 14.25" x 3.5"
1,130.3 mm x 362 mm x 88.9 mm
Weight 23.30 lb (10.6 kg)
• Debris shield
• 12 foam strips 1" x 5"
• 8 foam strips 1" x 8"
• Plastic rivets for debris shield
• 12 wood screws
SRS–210W-B bafe assembly
• Bafe assembly
Dimensions 26.75" x 11.75" x 3.25"
679.5 mm x 298.5 mm x 82.6 mm
Weight 29 lb (13.2 kg)
• 14 Allen head screws and washers
(8-32 x 1.25")
SRS–210W-G grill assembly
• Grille frame
Dimensions 28.80" x 13.8" x 0.7"
731.5 mm x 350.5 mm x 17.78 mm
(includes drywall spacer)
Weight 2.00 lb (0.9 kg)
• Grille
Dimensions 26.5" x 11.5" x 0.75"
673.1 mm x 292.1 mm 19.1 mm
Weight 0.6 lb (0.27 kg)
• Paint shield
• 12 Allen head screws
SRA–2700EQ amplier
• SubRosa amplier
Dimensions 1.75" (1U) x 17" x 15"
44.5 mm x 431.8 mm x 381 mm
Weight 18.4 lb. (8.35 kg)
• Room measurement microphone
with stand and cord
• AC power cord
• 2 rack-mount brackets
Introduction
5
User's Manual
Dimensions
0
1.261 in/ 32.1 mm
13.045 in/ 331.343 mm
14.250 in/ 362 mm
3.533 in/ 89.7 mm
10.717 in/ 272.2 mm
0
35.590 in/
904 mm
44.500 in/
1,130.3 mm
3.500 in
88.9 mm
Front View Back ViewSide View
8.830 in/
224.3 mm
Front Cutout
required in wall
to fit woofer assembly
11.784 in/
299.3 mm
26.76 in/
679.7 mm
Dimensions
6
Loading...