PB9800R
Instruction &
Recipe Booklet
Please read these instructions carefully
and retain for future reference
PB9800
Important instructions – retain for
future use.
Contents
Sunbeam’s Safety Precautions for your
Café Series
Features of your Café Series
Speed Dial, Pre-Programmed Functions
and Pulse Button 8
Lid assembly 9
Operating your Café Series
Blade Assembly 11
Processing Baton 12
Care and Cleaning 13
Helpful Blending Hints 14
Recipes 15
Smoothies, Milkshakes and Frappes 15
Cocktails 18
Soups 20
Dressings, Sauces and Dips 23
Baby food 28
®
Blender 4
®
Blender 6
®
Blender
10
3
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR
SUNBEAM CAFÉ SERIES BLENDER
PB9800.
• Ensure fingers are kept well away from the
blades when in use. The processing baton
may be used while the motor is running with
the main part of the lid in place.
• Always operate on a flat level surface.
• Ensure the control dial is in the “OFF”
position and the jug is in place before
plugging into the power outlet.
• Do not operate on low speed for more than
30 seconds at a time when blending heavy
loads.
• Always remove the plug from the power
outlet when the blender is not in use, before
disassembling, putting on or taking off parts,
and before cleaning other than washing the
jug.
• Blade is sharp, handle carefully.
• Always operate the blender with the lid in
place.
• When using heavy loads, the blender should
not be operated for more than 15 seconds.
This does not apply to any of the recipes
detailed in this instruction booklet.
• Do not place the blade assembly onto the
motor base without it being correctly fitted to
the jug.
• The maximum load capacity of the jug is
2 litres, and substantially less with thick
mixtures.
• When making peanut butter (or other nut
butters, or oil based foods) do not process
for more than one minute after mixture
starts circulating. Over-processing will cause
the mixture in the jug to overheat. Do not
process more than 500g of nuts at a time.
• Jug should not be more than 2/3 full when
the processing baton is left in place while
blending. Do not exceed 30 seconds of
continuous blending with processing baton in
place.
• The blender is fitted with a safety switch to
prevent the motor operating unless the jug is
in place.
• Do not blend warm/hot ingredients. Allow
ingredients to cool to room temperature
before placing in jug.
4
Sunbeam’s Safety Precautions
Sunbeam is very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:
• Read carefully and save all the instructions
provided with an appliance.
• Always turn the power off at the power outlet
before you insert or remove a plug. Remove
by grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug
when the appliance is not in use and
before cleaning.
• Do not use your appliance with an extension
cord unless this cord has been checked
and tested by a qualified technician or
service person.
• Always use your appliance from a power
outlet of the voltage (A.C. only) marked
on the appliance.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• The temperature of accessible surfaces may be
high when the appliance is operating.
• Never leave an appliance unattended while
in use.
• Do not use an appliance for any purpose
other than its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch
any hot surface.
• Do not operate any electrical appliance with
a damaged cord or after the appliance has
been damaged in any manner. If damage is
suspected, return the appliance to the nearest
Sunbeam Appointed Service Centre
for examination, repair or adjustment.
• For additional protection, Sunbeam
recommend the use of a residual current
device (RCD) with a tripping current not
exceeding 30mA in the electrical circuit
supplying power to your appliances.
• Do not immerse the appliance in water
or any other liquid unless recommended.
• Appliances are not intended to be operated
by means of an external timer or separate
remote control system.
• This appliance is intended to be used in
household and similar applications such
as: staff kitchen areas in shops, offices and
other working environments; farm houses; by
clients in hotels, motels and other residential
type environments; bed and breakfast type
environments.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
5
Features of your Sunbeam
®
Café Series
Ingredient measuring cap
Handy 60ml removable measuring cap.
Jug lid with ingredient measuring cap
To provide the necessary safety, the lid
seals tightly to the jug and features a
pouring hole, that allows you to add
ingredients during blending.
2 litre capacity square BPA-free
DURALITE™ jug
Inherent with superior blending
performance the square jug design has
a large 2 litre capacity. It is constructed
utilising an ultra-durable BPA free
material that is impact resistant and
withstands cracking in the dishwasher for
hundreds of cycles. Additional benefits
include heat, stain and scratch resistance
and its lightweight composition.
Blender
Stainless steel blade
Configured to optimise all processing
tasks and provide the ultimate
performance, the precision cut and
sharpened stainless steel blade assembly
is mounted on a sealed bearing for faster
speed and longer life.
Processing baton
Specially designed to assist during
demanding processing tasks, the baton
allows you to safely push food into the
blades while the blender is operating.
Pulse button
The ‘Pulse’ feature provides short bursts
of power. To activate, depress the ‘Pulse’
button and hold down as long as needed.
Ideal for preparing breadcrumbs, nuts
and biscuits.
6
Removable blade assembly
Blade assembly is removable for
thorough cleaning.
Heavy-duty 2000 watt motor
Enables blade speeds to reach up to
20,000 revolutions per minute (RPM)
delivering the power to uniformly
blend small or large quantities of
ingredients regardless of the load. Its
high performance and reliability are
backed by a 5 year motor guarantee.
Variable speed dial
The control dial allows you to select
a speed depending on the blending
task and texture of ingredients.
Turn the speed control dial in a
clockwise direction and the blender
automatically starts. The variable
speed dial allows you to select
continuously variable motor speeds
ranging from 4,000 to 15,000
revolutions per minute (free load).
Pre-programmed functions
Pre-programmed functions make
blending even easier. The 'Slow
Start' button will slowly ramp up the
speed selected on the control dial,
while popular blending functions like
'Smoothie' and 'Ice-Crush' will be
performed at the touch of a button.
To make cleaning a breeze, use the
'Pre-Clean' function.
Non-slip feet
Heavy-duty non-slip feet ensure the
blender remains stable and prevents
slipping on the bench top during use.
Cord wrap
Cord wraps away to keep bench top
clean.
7
Speed Dial, Pre-Programmed
Functions and Pulse Button
Variable speed dial
Turn the speed control dial in a clockwise
direction and the blender automatically
starts. The variable speed dial allows you to
select continuously variable motor speeds
ranging from 4,000 to 15,000 revolutions
per minute (free load).
Pulse button
The ‘Pulse’ feature provides short bursts of
power. To activate, depress the ‘Pulse’ button
and hold down as long as needed. Ideal for
preparing breadcrumbs, nuts and biscuits.
Pre-programmed functions
Pre-programmed functions make blending
easy as they perform a blending task at
the touch of a button. Select the required
function by pressing the corresponding
function button. The blender will start to
operate and only the selected function button
will illuminate. On completion of the task,
the motor will stop and all function buttons
will illuminate indicating that these are now
available for use.
Slow Start – The motor will slowly ramp up
its speed to the speed setting chosen on the
variable speed dial.
Smoothie – Perfect for blending smoothies.
The Smoothie function is programmed to
blend the denser ingredients at a lower
speed setting, then increases as ingredients
thicken.
Ice Crush – Ideal for ice-crushing or
ingredients that require short bursts of power.
Pre-Clean – An easy and quick way to
rinse the DURALITE™ blending jug after
the processing task is complete. For more
information, please refer to the “Operating
your Café Series® Blender” or the “Care and
Cleaning” section in this booklet on pages 10
and 13.
The selection can be changed at any time
during the blending process. Press the
currently illuminated button to stop the
cycle. Then select a new function. The button
will stay illuminated and the new function
will start.
8
Lid assembly
The lid is easy to position on or remove, and
to clean, see Figure 1.
1. Simply push lid down firmly to seal.
2. To secure the measuring cap, slide it into
the top of the rubber lid and rotate to lock.
3. The measuring cap can be removed when
using the processing baton or when adding
ingredients.
Note: As there is no locking design we advise
that you place your hand on the lid as you
initially start processing.
Figure 1
9
Operating your Café Series®
Blender
1. Place the DURALITE™ jug on the motor
base by locating it over the four non-slip
rubber jug mounts. The jug can be
placed on the motor base in four different
positions.
2. Place ingredients into the DURALITE™
jug.
Note: Do not operate the blender when the
jug is empty.
3. Place the lid firmly into position on the
DURALITE™ jug. Always ensure the
measuring cap is in place when processing,
except when the processing baton is
inserted through the opening in the lid; or
when adding ingredients through the hole
in the lid.
Note: Always have the lid in position during
processing.
4. a) Using the speed dial:
Using the variable speed dial, select the
desired processing speed from 1 – 5 and
this will provide continuous processing until
the dial is turned anti-clockwise to the ‘0’
position.
Due to the high processing speed of the
Café Series® Blender, processing times are
significantly reduced over those of standard
blenders. Therefore we advise that until
you are familiar with the speed of the Café
Series® Blender that you keep a close watch
on ingredients being processed.
Tip: Use the ‘Slow Start’ feature to combine
ingredients at the start of blending. To do
so, press the ‘Slow Start’ function button
first, then turn the speed dial to the desired
speed. The blender will slowly ramp up its
speed to this chosen speed setting.
10
Tip: Once processing has commenced, further
ingredients can be added by removing the
measuring cap and pouring ingredients
through the hole in the lid.
Note: Wait until blade comes to a complete
stop before removing the lid or jug.
4. b) Using a pre-programmed function:
Select the desired function by pressing
the appropriate function button. The
blender will start to operate and only the
selected function button will illuminate.
On completion of the task, the motor will
stop and all function buttons will illuminate
indicating that these are now available again.
Note: The ‘Slow Start’ must be used in
combination with the variable speed dial.
Please refer to 4.a.
Before a new function can be selected, the
previous function must be stopped.
To stop blending at any time, press the
selected function button.
Tip: Once processing has commenced, further
ingredients can be added by removing the
measuring cap and pouring ingredients
through the hole in the lid.
Note: Wait until blade comes to a complete
stop and all function buttons illuminate
before removing the lid or jug.
Loading...