
READ AND SAVE THESE INSTRUCTIONS
INSTALLATION &
OPERATING MANUAL
MODEL PC “WALL SERIES” NON-REFRIGERATED PASTY MERCHANDISERS
A Lineup of Two (2)
Model PC3982.6025 Units
Is Shown At Right
PN 86772
888 E. Porter Road · Muskegon, MI 49441 Phone: 231.798.8888 Fax: 231.798.4960 www.structuralconcepts
I:\Oper Manuals\Addenda\PC3982_PC5682_PC7482_Manual_86772.pub
Model PC5682
Is Shown At Left
Note: This manual pertains to Structural
Concepts’ Models PC3982, PC5682 and
PC7482 as well as a variety of CDRs.
Rev. G: 5.30.2014

TABLE OF CONTENTS
OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING / PLUGS …………...
INSPECTION AT ARRIVAL / REMOVAL FROM SKID ………………………………………...…………..
MIRROR INSTALLATION & RETROFITTING / CASE LEVELING / BOLTING & SCREWING .……….
PACKAGE LEDGE ADJOINING / HEADER ADJOINING…………………………………………………..
RACK MOVING AND REMOVAL / ELECTRICAL CONNECTIONS ...…………………………...……….
SERIAL LABEL & LOCATION / INFORMATION LISTED / ADD’L TECH INFO & SERVICE .………....
SCC TECHNICAL SERVICE CONTACT INFORMATION & WARRANTY INFORMATION .…………..
3
4
5
6
7
8
9
2

OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING / PLUGS
OVERVIEW
These Structural Concepts Addenda® self-service
cases are designed to merchandise unpackaged
and/or packaged products at ambient temperatures.
Cases should be installed and operated according to
this operating manual’s instructions to insure proper
performance. Improper use will void warranty.
COMPLIANCE
Performance issues when in violation of applicable
NEC, federal, state and local electrical codes are not
covered by warranty.
See below compliance guideline.
This equipment MUST be installed in compliance with
all applicable NEC, federal, state and local electrical codes.
WARNING
Risk of electric shock. Disconnect power before servicing unit.
ELECTRICAL
HAZARD
CAUTION! More than one source of electrical supply is
employed with units that have separate circuits.
Disconnect ALL ELECTRICAL SOURCES before servicing.
WARNING
Carefully read “Electrical Hazard” section below to
prevent injury or death. Please read carefully!
PRECAUTIONS
Carefully read “Lamp Replacement Guidelines” below
for important precautions to prevent damage to unit or
merchandise.
WIRING DIAGRAM
Each case has its own wiring diagram folded and in its
own packet.
Wiring diagram placement may vary; it may be placed
near ballast box, field wiring box, raceway cover, or
other related location.
COMPLIANCE
WARNING
CAUTION
CAUTION! LAMP REPLACEMENT GUIDELINES
LED lamps reflect specific size, shape and overall design.
Any replacements must meet factory specifications.
Fluorescent lamps have been treated to resist breakage and
must be replaced with similarly treated lamps.
CAUTION! GFCI BREAKER USE REQUIREMENT
If N.E.C. (National Electric Code) or your local code
requires GFCI (Ground Fault Circuit Interrupter) protection,
you MUST use a GFCI breaker in lieu of a GFCI receptacle.
CAUTION! POWER CORD AND PLUG MAINTENANCE
Risk of electric shock. If cord or plug becomes damaged,
replace only with cord and plug of same type.
3