Stovax RVACB120B, RVACB45B, RVACB100B User Manual

Riva Freestanding Bench

Installation Instructions

Product Codes: RVACB45B (For use with RVF40C)

RVACB100B (For use with RVF40C, RVF66 & RVF76)

RVACB120B (For use with RVF40C, RVF66 & RVF76)

IMPORTANT

Please read these instructions carefully and in conjunction with the appropriate Riva instructions.

Care must be taken when handling the stove to avoid injury or damage to the stove.

PM205 ENG Issue 2 (August 2007)

ASSEMBLY INSTRUCTIONS

Packing list

• User Instructions

• 3 x Drilling Templates

• 4 x M6 x 90 Coach bolts

• 4 x M6 Washers

• 4 x M6 Nuts

• 2 x No.8 Hex Coach bolt

• 2 x Rawl plugs

• 5 x Felt pads

1

Tools required

• 10mm A/F Spanner

• 13mm A/F Spanner

• Hammer

• Center Punch

• Power Drill with:

• Ø8mm Masonry drill bit

• Ø8mm Steel drill bit

• Pozidrive attachment

3

No8 rawl plug

1. Position bench on your hearth and mark
out the 2 key slots on the floor.

2

Ø8mm

2. Remove bench and drill the two marked
positions with Ø8mm hole to 50mm deep.

PR7582

PR7583

Ø8mm hole

PR7584

3. Tap in No.8 Rawl plugs.

4

No8 Coach Bolt

5mm gap

PR7585

4. Screw in No.8 coach bolt leaving 5mm gap
from the surface of the floor.

2