www.stiebel-eltron.com SHO AC | 17
CONTENTS | SPECIAL INFORMATION
SPECIAL INFORMATION
OPERATION
1. General information ��������������������������������������� 18
1.1 Safety instructions ���������������������������������������������� 18
1.2 Other symbols in this documentation ���������������������� 19
2. Safety �������������������������������������������������������� 19
2.1 Intended use ����������������������������������������������������� 19
2.2 General safety instructions �����������������������������������19
2.3 Test symbols ����������������������������������������������������� 19
3. Appliance description ������������������������������������� 19
3.1 Appliance type with single circuit operation �������������� 19
3.2 Appliance type with dual circuit operation ���������������� 19
4. Settings ����������������������������������������������������� 20
5. Cleaning, care and maintenance ������������������������� 20
6. Troubleshooting ������������������������������������������� 20
INSTALLATION
7. Safety �������������������������������������������������������� 21
7.1 General safety instructions ����������������������������������� 21
7.2 Instructions, standards and regulations ������������������� 21
8. Appliance description ������������������������������������� 21
8.1 Standard delivery ����������������������������������������������� 21
8.2 Accessories ������������������������������������������������������� 21
9. Preparations ������������������������������������������������ 21
9.1 Installation site �������������������������������������������������� 21
10. Installation �������������������������������������������������� 21
10.1 Cold water connection and safety assembly �������������� 21
10.2 Signal anode ����������������������������������������������������� 22
10.3 Preparing the “DHW circulation” connection, if
applicable ��������������������������������������������������������22
10.4 Thermal insulation ��������������������������������������������� 22
10.5 Thermometer ���������������������������������������������������� 22
10.6 DHW connection and safety assembly ���������������������� 22
10.7 Power connection ����������������������������������������������23
11. Commissioning ��������������������������������������������� 23
11.1 Commissioning �������������������������������������������������� 23
11.2 Recommissioning ����������������������������������������������� 23
12. Settings ����������������������������������������������������� 23
13. Shutting down ���������������������������������������������� 23
14. Troubleshooting �������������������������������������������� 24
15. Maintenance ������������������������������������������������ 24
15.1 Checking the safety valve ������������������������������������� 24
15.2 Draining the appliance ���������������������������������������� 24
15.3 Replacing the signal anode ����������������������������������� 24
15.4 Cleaning and descaling the appliance ���������������������� 24
15.5 Replacing the heating elements and protective pipe���� 25
16. Specification ������������������������������������������������ 26
16.1 Dimensions and connections ��������������������������������� 26
16.2 Wiring diagrams and terminals ������������������������������ 27
16.3 Heat-up diagram ������������������������������������������������ 28
16.4 Fault conditions �������������������������������������������������28
16.5 Details on energy consumption ������������������������������ 29
16.6 Data table �������������������������������������������������������� 29
GUARANTEE
ENVIRONMENT AND RECYCLING