2 | FB 1 LCD www.stiebel-eltron.com
CONTENTS | OPERATION
General information
OPERATION
1. General information �����������������������������������������2
1.1 Safety instructions ����������������������������������������������� 2
1.2 Other symbols in this documentation ����������������������� 2
1.3 Units of measurement ������������������������������������������ 3
2. Safety ���������������������������������������������������������� 3
2.1 Intended use ������������������������������������������������������ 3
2.2 General safety instructions ������������������������������������ 3
3. Appliance description ���������������������������������������3
3.1 Operation ���������������������������������������������������������� 3
4. Cleaning, care and maintenance ���������������������������3
5. Troubleshooting ����������������������������������������������3
INSTALLATION
6. Safety ���������������������������������������������������������� 4
6.1 General safety instructions ������������������������������������ 4
6.2 Instructions, standards and regulations �������������������� 4
6.3 Relevant documents��������������������������������������������� 4
7. Appliance description ���������������������������������������4
7.1 Standard delivery ������������������������������������������������ 4
7.2 Required accessories ������������������������������������������� 4
8. Installation ���������������������������������������������������� 4
8.1 Control cable������������������������������������������������������ 4
8.2 Converting the instantaneous water heater ���������������� 4
8.3 Fitting the adaptor assembly ���������������������������������� 5
8.4 Installation site ��������������������������������������������������� 5
8.5 Mounting the flush box ����������������������������������������� 5
8.6 Mounting the programming unit ����������������������������� 5
9. Commissioning �����������������������������������������������6
9.1 Appliance handover ��������������������������������������������� 6
10. Shutting down ������������������������������������������������ 6
11. Recommissioning ��������������������������������������������6
12. Troubleshooting ����������������������������������������������6
13. Maintenance ��������������������������������������������������6
14. Specification ��������������������������������������������������6
14.1 Dimensions and connections ���������������������������������� 6
14.2 Data table ��������������������������������������������������������� 6
GUARANTEE
ENVIRONMENT AND RECYCLING
OPERATION
1. General information
The chapter "Operation" is intended for appliance users and qualified contractors.
The chapter "Installation" is intended for qualified contractors.
Note
Read these instructions carefully before using the appliance. Keep this manual safe.
Pass on the instructions to any new user if required.
1.1 Safety instructions
1.1.1 Structure of safety instructions
!
KEYWORD Type of risk
Here, possible consequences are listed that may result
from failure to observe the safety instructions.
Steps to prevent the risk are listed.
1.1.2 Symbols, type of risk
Symbol Type of risk
Injury
Electrocution
Burns
(burns, scalding)
1.1.3 Keywords
KEYWORD Meaning
DANGER Failure to observe this information will result in serious
injury or death.
WARNING Failure to observe this information may result in serious
injury or death.
CAUTION Failure to observe this information may result in non-seri-
ous or minor injury.
1.2 Other symbols in this documentation
Note
General information is identified by the symbol shown
on the left.
Read these texts carefully.
Symbol Meaning
Material losses
(Appliance and consequential losses, environmental pollution)
Appliance disposal
!
!