STIEBEL ELTRON DHB-E SLi, DHB STi, HDB-E Si Operation And Installation

OperatiOn and installat iOn
Hardwired remote control for instantaneous water heaters DHB-ESLi, DHBSTi, HDB-ESi
» FB 1 lCd
electronic LCD
CONTENTS | OPERATION
General information
OPERATION
1. General information �����������������������������������������2
1.1 Safety instructions ����������������������������������������������� 2
1.2 Other symbols in this documentation ����������������������� 2
1.3 Units of measurement ������������������������������������������ 3
2. Safety ���������������������������������������������������������� 3
2.1 Intended use ������������������������������������������������������ 3
2.2 General safety instructions ������������������������������������ 3
3. Appliance description ���������������������������������������3
3.1 Operation ���������������������������������������������������������� 3
4. Cleaning, care and maintenance ���������������������������3
5. Troubleshooting ����������������������������������������������3
INSTALLATION
6. Safety ���������������������������������������������������������� 4
6.1 General safety instructions ������������������������������������ 4
6.2 Instructions, standards and regulations �������������������� 4
6.3 Relevant documents��������������������������������������������� 4
7. Appliance description ���������������������������������������4
7.1 Standard delivery ������������������������������������������������ 4
7.2 Required accessories ������������������������������������������� 4
8. Installation ���������������������������������������������������� 4
8.1 Control cable������������������������������������������������������ 4
8.2 Converting the instantaneous water heater ���������������� 4
8.3 Fitting the adaptor assembly ���������������������������������� 5
8.4 Installation site ��������������������������������������������������� 5
8.5 Mounting the flush box ����������������������������������������� 5
8.6 Mounting the programming unit ����������������������������� 5
9. Commissioning �����������������������������������������������6
9.1 Appliance handover ��������������������������������������������� 6
10. Shutting down ������������������������������������������������ 6
11. Recommissioning ��������������������������������������������6
12. Troubleshooting ����������������������������������������������6
13. Maintenance ��������������������������������������������������6
14. Specification ��������������������������������������������������6
14.1 Dimensions and connections ���������������������������������� 6
14.2 Data table ��������������������������������������������������������� 6
GUARANTEE
ENVIRONMENT AND RECYCLING
OPERATION
1. General information
The chapter "Operation" is intended for appliance users and qual­ified contractors.
The chapter "Installation" is intended for qualified contractors.
Note
Read these instructions carefully before using the appli­ance. Keep this manual safe. Pass on the instructions to any new user if required.
1.1 Safety instructions
1.1.1 Structure of safety instructions
!
KEYWORD Type of risk Here, possible consequences are listed that may result from failure to observe the safety instructions.
Steps to prevent the risk are listed.
1.1.2 Symbols, type of risk
Symbol Type of risk
Injury
Electrocution
Burns (burns, scalding)
1.1.3 Keywords
KEYWORD Meaning
DANGER Failure to observe this information will result in serious
injury or death.
WARNING Failure to observe this information may result in serious
injury or death.
CAUTION Failure to observe this information may result in non-seri-
ous or minor injury.
1.2 Other symbols in this documentation
Note
General information is identified by the symbol shown on the left.
Read these texts carefully.
Symbol Meaning
Material losses (Appliance and consequential losses, environmental pol­lution)
Appliance disposal
!
!
OPERATION
Safety
English
This symbol indicates that you have to do something. The ac-
tion you need to take is described step by step.
1.3 Units of measurement
Note
All measurements are given in mm unless stated oth­erwise.
2. Safety
2.1 Intended use
This device is intended to be used with instantaneous water heat­ers DHB-ESLi, DHB-STi and HDB-ESi.
This appliance is intended for domestic use. It can be used safely by untrained persons. The appliance can also be used in a non-do­mestic environment, e.g. in a small business, as long as it is used in the same way.
Any other use beyond that described shall be deemed inappropri­ate. Observation of these instructions and of instructions for any accessories used is also part of the correct use of this appliance.
2.2 General safety instructions
CAUTION Burns
There is a risk of scalding at outlet tempera­tures in excess of 43°C.
!
WARNING Injury
The appliance may be used by children aged 8 and up and persons with reduced physical, sensory or mental capabilities or a lack of ex­perience and know-how provided that they are supervised or they have been instructed on how to use the appliance safely and have understood the resulting risks. Children must never play with the appliance. Children must never clean the appliance or perform user maintenance unless they are supervised.
3. Appliance description
This hardwired remote control enables the user to operate the instantaneous water heater exclusively via the remote control. The data transfer between the hardwired remote control and the in­stantaneous water heater occurs by means of the integral adapter assembly and a cable.
3.1 Operation
The required DHW outlet temperature of the instantaneous water heater can be selected via the temperature selector on the hard­wired remote control.
electronic LCD electronic LCD
2
1
3
26�02�02�0639�
1 Selector 2 Setting range minimum 3 Setting range maximum
Turn the temperature selector to the required temperature.
At times, the outlet temperature of the instantaneous water heater may differ from the set temperature.
!
Note
If the outlet temperature is not sufficiently high when the draw-off valve is fully open and the temperature selector is set to maximum, then more water is flowing through the appliance than can be heated by the heating system (appliance is at its output limit).
Reduce the flow at the draw-off valve, this will allow
the system to achieve the required temperature again.
4. Cleaning, care and maintenance
Never use abrasive or corrosive cleaning agents. A damp
cloth is sufficient for cleaning the appliance.
5. Troubleshooting
See chapter “Troubleshooting” in the instantaneous water heater instructions.
Loading...
+ 5 hidden pages