How it Works
Steelcase
Loading...
ADP 601
User Manual
11 pgs550.79 Kb0

Steelcase ADP 601 User Manual

CONFIDENTIAL
i
Title: <ADP601> General Inspection Direction Specification
Prepared by: Choul Goo Lee, Taeyoung Ko Date: 2011.09.27.
Document No:
PG_ADP601_QA_General Inspection D
Specification
GENERAL INSPECTION DIRECTION SPECIFICATION
___________________________________________________________________________
Doc No. PG_ADP601_ QA_General Inspection Direction Specification_RevB1
Page 1 of 10
Propriety Information, No Dissemination or Use Allowed Without Prior Written Permission All printed copies are considered Uncontrolled copies unless the copies are stamped with “For Information Only” or “Controlled Copy” by Documentation Contr ol gro u p.
CONFIDENTIAL
i
Document No:
PG_ADP601_QA_General Inspection D
Specification
Title: <ADP601> General Inspection Direction Specification
Prepared by: Choul Goo Lee, Taeyoung Ko Date: 2011.09.27.
Table of Content
GENERAL INSPECTION DIRECTION SPECIFICATION....................................................................1
TABLE OF CONTENT..........................................................................................................................2
1 COSMETIC INSPECTION............................................................................................................3
1.1 Shape.......................................................................................................................................3
1.2 Appearance .............................................................................................................................3
1.3 Others......................................................................................................................................4
1.4 2D Drawing.............................................................................................................................5
2 PAIRING & WRITING TEST .......................................................................................................6
2.1 Using ANOTO ‘streamer test tool’.........................................................................................6
2.2 Using PG ‘drawing test program’...........................................................................................9
CHANGE HISTORY..............................................................................................................................1
___________________________________________________________________________
Doc No. PG_ADP601_ QA_General Inspection Direction Specification_RevB1
Page 2 of 10
Propriety Information, No Dissemination or Use Allowed Without Prior Written Permission All printed copies are considered Uncontrolled copies unless the copies are stamped with “For Information Only” or “Controlled Copy” by Documentation Contr ol gro u p.
CONFIDENTIAL
i
Document No:
PG_ADP601_QA_General Inspection D
Specification
Title: <ADP601> General Inspection Direction Specification
Prepared by: Choul Goo Lee, Taeyoung Ko Date: 2011.09.27.
1 COSMETIC INSPECTION
1.1 Shape
Item
1 Dimension N=5PCS/LOT Please see the drawing of parts C=0 In the Spec
Inspection method
Inspection content Judgment
1.2 Appearance
① Plastic parts
Item
Inspection method
Inspection content Judgment
1 Color S=4PCS/LOT
Defect of Injection (Flow mark, Weld line, Crack,
2
Mark of E-Pin, Burr, Short Short, Deform, Strees whitening Silver
Foreign substance (Black
3
Dot, Discoloration)
4 Scratch, Grime
Total inspection
Total inspection
Total inspection
② Coating (UV Coating, SF Coating)
Item
1 Color, Gloss S=4/LOT
Inspection method
Inspection content Judgment
All surroundings are watched from the front and the diagonal 45 degrees.
All surroundings are watched from the front and the diagonal 45 degrees.
All surroundings are watched from the front and the diagonal 45 degrees.
All surroundings are watched from the front and the diagonal 45 degrees. Limit of Black dot size: please see other page.
All surroundings are watched from the front and the diagonal 45 degrees.
C=0 It depends on color standard sample for plastic parts.
It depends on limit sample (it makes if necessary.)
It depends on limit sample (it makes if necessary.)
It depends on limit sample (it makes if necessary.)
C=0 It depends on limit sample.
2 Leveling, irregular color
Foreign substance in
3
coating surface
Total inspection
Total inspection
All surroundings are watched from the front and the diagonal 45 degrees.
All surroundings are watched from the front and the diagonal 45 degrees. Limit of Black dot size: please see other page
It depends on limit sample. (It makes if necessary.)
It depends on limit sample. (It makes if necessary.)
___________________________________________________________________________
Doc No. PG_ADP601_ QA_General Inspection Direction Specification_RevB1
Page 3 of 10
Propriety Information, No Dissemination or Use Allowed Without Prior Written Permission All printed copies are considered Uncontrolled copies unless the copies are stamped with “For Information Only” or “Controlled Copy” by Documentation Contr ol gro u p.
CONFIDENTIAL
i
Document No:
PG_ADP601_QA_General Inspection D
Specification
Title: <ADP601> General Inspection Direction Specification
Prepared by: Choul Goo Lee, Taeyoung Ko Date: 2011.09.27.
Defect of coating
4
(Dripping off, Whitening)
Total inspection
All surroundings are watched from the front and the diagonal 45 degrees.
It depends on limit sample. (It makes if necessary.)
5 Scratch, Grime
Total inspection
All surroundings are watched from the front and the diagonal 45 degrees.
It depends on limit sample. (It makes if necessary.)
9 The Sampling inspection method applies to JIS Z9015-1=1999.
1.3 Others
The following tale is applied to the inspection of the foreign substance of painting and foreign substance of the plastics.
① Assembly
Gap gap is within limit [0.05mm Pass / 0.1mm Fail] / Length : 20mm
② Classification of surface
A surface All as pects part that comes within the sweep seeing product in the front B surface Side and the back part that doesn’t come within the sweep seeing product in the front C surface The lower side and non-exposure side of product
③ Substance
Dot Hardening of paints and foreign substance other than paints : Same color Black point Foreign substance Black color Bubble Bubble generated in painting
④ Environment of inspection
Judgement Condition
Inspecter 0.7 or more in the corrected eyesight.
(1) The visual inspection watches all surroundings from the front and the diagonal 45 degrees. (2) The visual inspection distance is 30cm (3) It inspects by using the worktable under the daylight color fluorescent lamp Illuminance is 600~900LUS
___________________________________________________________________________
Doc No. PG_ADP601_ QA_General Inspection Direction Specification_RevB1
Page 4 of 10
Propriety Information, No Dissemination or Use Allowed Without Prior Written Permission All printed copies are considered Uncontrolled copies unless the copies are stamped with “For Information Only” or “Controlled Copy” by Documentation Contr ol gro u p.
Loading...
+ 7 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use