Stax SRM-310 Brochure

electrostatic audio products

January 2004

SRM-310

NEW STYLE DRIVER UNIT FOR EARSPEAKERS

Features

SRM-310 is an exclusive amplifier to drive STAX's electrostatic earspeakers. During storage, etc., it can also be used as a stand for the earspeakers.

●A push-pull signal is obtained by low-noise FET input OP Amp, for ICL input.

The output stage consists of a simple inverting amplifier based on low-noise FETs and high voltage transistors.

●The SRM-310 adopted the regulated power for clear sound in bias voltage and power supply.

●Attachment of parallel input and output terminals make with connection to an amplifier for loudspeaker and earspeakers.

SRS-3010

EARSPEAKER SYSTEM:

SR-202 Earspeaker & SRM-310 Driver Unit

Specifications

● Frequency response	: 70KHz +0, - dB SR-202 load
● Input level	: 200mV 100V out put
● Maximum Out put Level	: 350V r.m.s.
● Gain	: 54dB
● Harmonic Distortion	: Less than 0.02 1kHz,100Vr.m.s. SR-202 load
● Impedance	: 70KohmsΩ
● Input terminals	: RCA×1 with parallel terminal
● Standard bias voltage	: 580VDC +0,-5
● Power supply	: AC120 240V, 50Hz/60Hz
	(Voltage is adjusted for your area)
● Power consumption	: 10W
● Operating temperature range : 0 35
● Dimensions	: 85(W) Bottom 130×275(H) ×130(D) mm
● Weight	: 1.7Kg

Specifications and design are subject to change without notice.

STAX LIMITED	Tel :[phone]	Home Page	:http://www.stax.co.jp
293-1 Fujikubo, Miyoshi-cho, Iruma-gun, Saitama Prefecture Japan 354-0041	Fax:[phone]	E-mail	:[e-mail]