State GS6 40 YBVIT User Manual

RESIDENTIAL

SELECT

Residential Power Vent Gas Water Heaters

State Select® Power Vent 40 and 50-gallon gas water heaters now feature a patented FVIR Compliant design, which meets Phase II of the ANSI Z21.10.1 standards for flammable vapor ignition resistance. A power vent water heater is an excellent alternative for many replacement applications where a conventional vertical vent model is not a practical option and offers versatility for installations of gas water heaters in residential new construction.

Enhanced Power Vent Capabilities

• System allows combined horizontal and vertical vent runs up to 120 equivalent feet with 3” pipe, up to 160 equivalent feet with 4" pipe on 40,000 BTU and 50,000 BTU models

• 40 and 50-gallon models vent using 2", 3" or 4" Schedule 40 PVC, CPVC or ABS pipe

• Supplied with termination screens and elbow

• See next page for complete information on vent capabilities

™

Intelli-Vent

• Silicon nitride hot surface ignitor provides superior durability and eliminates standing pilot

• Advanced design ensures precise control of water temperature; simplifies diagnostics

• Gas connection located on side of control, same as conventional gas control

Electronic Gas Control

Diffuser Dip Tube

• Reduces lime and sediment buildup, maximizes hot water output

• Made from PEXAN exposure to temperatures up to 400ºF

™

, a cross-linked polymer that can withstand long-term

Patented Glasslined Tank with Aluminum Anode Rod

• For long-lasting protection against corrosion or sediment buildup

Advanced Power Vent Blower Design

• Equipped with 110/120 volt electrical system (rating 3 amps or less), 6-foot cord with standard 3-prong male connector

• Patented design reduces NOx emissions by up to 33% and meets less than 40 ng/j

requirements for low NOx

Durable, Tamper-Resistant Brass Drain Valve

CSA Certified and ASME Rated T&P Relief Valve

Design-Listed by Underwriters Laboratories

• Listed according to ANSI Z21.10.1 - 10.3 - CSA 4.1 - 4.3 standards governing storage-type water heaters

• Code compliance: UBS, CEC, SBCC, CABO, HUD, BOCA National codes. Meets the the thermal efficiency and standby loss requirements of the U.S. Department of Energy and Current Edition of ASHRAE/IESNA 90.1 and Federal Energy Efficiency Standards Effective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of 1992.

Maximum Hydrostatic Working Pressure: 150 psi

FVIR Compliant

• See other side 6-Year Limited Tank and Parts Warranty

• Consult written warranty or contact State Water Heaters for complete information.

Gas Water Heater Design

GAS-FIRED

For more information on State® contact: State Water Heaters 500 Tennessee Waltz Parkway, Ashland City, TN 37015

800.365.0024 Toll-free USA www.statewaterheaters.com

Intelli-Vent™ is a trademark of Emerson Electric Company

Low Lead Content

SELECT

Residential Power Vent Gas Water Heaters

RESIDENTIAL

FIRST MODEL HOUR ENERGY GALLON NUMBER RATING FACTOR CAPACITY GALLONS PER HOUR (LBS)

GS6 40 YBVIT 69 .65 40 40,000 44 8 63 55 18-1/2 13 8 49 2, 3 or 4 157 GS6 50 YBVIT 83 .65 50 40,000 44 8 65 56-3/4 20 13 8 50-1/4 2, 3 or 4 177 GS6 40 YBVIT 2 70 .67 40 40,000 44 16 63 55 20-1/2 13 8 49 2, 3 or 4 166 GS6 50 YBVIT 2 83 .67 50 40,000 44 16 65 56-3/4 22 13 8 50-1/4 2, 3 or 4 186 GS6 40 YRVIT 80 .65 40 50,000 53 16 63 55 20-1/2 13 8 49 2, 3 or 4 166 GS6 50 YRVIT 83 .65 50 50,000 53 16 65 56-3/4 22 13 8 50-1/4 2, 3 or 4 186

GS6 75 YRVIT* N/A N/A 74 80,000 86 12 66 57 25-1/2 15 16 50-1/4 3 or 4 245

*74-gallon model is not FVIR construction Propane Inputs: GS6 40 HBVIT, GS6 50 HBVIT, GS6 40 HBVIT 2, GS6 50 HBVIT 2: 40,000 BTU, GS6 40 HRVIT GS6 50 HRVIT: 50,000 BTU, GS6 50 HRVIT 5: 55,000 BTU, GS6 75 HRVIT: 80,000 BTU **R8=1", R12=1-1/2" and R16=2" foam capacity When ordering Propane, change the Y to H in the model number (GS6 40 HBVIT) GS6 YBVIT 2 and GS6 50 YBVIT 2 Models are ENERGY STAR® Qualified

MAXIMUM VENT DISTANCE MODEL BTU (Total Equivalent Feet) NUMBER INPUT 2" Pipe 3" Pipe 4" Pipe

GS6 40 YBVIT 40,000 40' 120' 160' GS6 50 YBVIT 40,000 40' 120' 160' GS6 40 YBVIT 2 40,000 40' 120' 160' GS6 50 YBVIT 2 40,000 40' 120' 160' GS6 40 YRVIT 50,000 40' 120' 160' GS6 50 YRVIT 50,000 40' 120' 160'

BTU INPUT

PER HOUR

NATURAL

RECOVERY

90°F RISE R

GALLONS VALUE**

A B C D E F

6' POWER CORD

DIMENSIONS IN INCHES

FACTORY

SUPPLIED

3/4" MALE WATER CONNECTIONS ON 40 AND 50 GALLON MODELS AND 1" MALE ON 74 GALLON

APPROX.

VENT

OPTIONS

SHIPPING

WEIGHT

GS6 75 YRVIT* 80,000 N/A 30' 100'

40 and 50-gallon models are supplied with 2", 22-1/2˚ Termination Elbow, plus 2", 3" and 4" screens. 74-gallon model is supplied with 3", 90˚ Termination Elbow, plus 3" screen. 2" & 3" elbows are equal to 5' of vent pipe. 4" elbows are equal to 8' of vent pipe. Important: Read and follow requirements shown in the Product Manual for Select Power-Vent gas water heaters dealing with type, placement and length of vent pipe and vent termination, as well as clearances required to provide adequate combustion and proper ventilation.

1/2" GAS CONNECTION

Flammable Vapor Ignition Resistant (FVIR) Gas Water Heaters

Design meets American National Standards Institute standards (ANSI Z21.10.1 - 10.3 - CSA 4.1 - 4.3) that deal with the accidental or unintended ignition of flammable vapors, such as those emitted by gasoline. Covered by four U.S. patents, FVIR gas water heaters feature a sealed combustion chamber with air intake screen and a fireproof Corderite flame arrestor built into the water heater base. Select® Power Vent water heaters are also equipped with a flammable vapor sensor, which automatically shuts down the blower, Intelli-Vent™ gas control and hot surface ignitor if the presence of flammable vapors is detected.

State Industries, Inc. reserves the right to make product changes or improvements without prior notice.

If flammable vapors accidentally enter the combustion chamber, the Corderite flame arrestor is designed so flames burn off the top surface and cannot escape down through the arrestor.

For more information on State® contact: State Water Heaters 500 Tennessee Waltz Parkway, Ashland City, TN 37015

800.365.0024 Toll-free USA www.statewaterheaters.com

B A