RESIDENTIAL
HIGH EFFICIENCY
RESIDENTIAL GAS MODELS
Series 100
ENERGY STAR® Qualified
• Meets ENERGY STAR requirements
for the .67 EF tier II efficiency
increase initiated September 1, 2010
and is eligible for most utility rebate
programs based on Energy Factor
(EF) Ratings.
Automatic Flue Damper
• Increases efficiency as it automatically opens and closes to reduce
heat loss in the standby mode.
Electronic Gas Control
• Intelligent control logic provides
enhanced operating parameters and
tighter differentials for precise sensing
and faster heating response to
optimize performance.
Diagnostics
• The electronic gas control
incorporates an LED status indicator
that monitors system operation and
service diagnostics.
Electronic Ignition
• Heater operates with an automatic
pilot relight system that shuts off the
pilot during stand-by modes to
reduce gas consumption and
eliminates nuisance pilot outage
issues associated with standing
pilot models.
Power Requirements
• Plugs into standard 110/120v outlet
(10 foot power cord included).
Diffuser Dip Tube
• Helps reduce lime and sediment
buildup, maximize hot water output.
Made of State PEXAN™, a crosslinked PEX polymer that can
withstand long-term exposure to
water temperatures up to 400°F.
Green Choice®Eco-Friendly
Gas Burner
• Patented Low NOx burner reduces
emissions by up to 33% and
complies with less than 40 ng/j
requirements for Low NOx.
Durable, Tamper-Resistant
Brass Drain Valve
Glasslined Tank
• For long-lasting protection
against corrosion.
Aluminum Anode Rod
• Helps protect against corrosion
and maximizes tank life.
CSA Certified and ASME
Rated T&P Relief Valve
• Top-mounted T&P Relief Valve
available as option on all models.
FVIR Compliant Gas Water
Heater Design
6-Year Limited Tank and
Parts Warranty
®
For more information on Select®contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
1-800-365-0024 Toll-free USA
www.statewaterheaters.com
Code Compliance - All models meet the Federal Energy Efficiency
Standards effective January 20, 2004, according to the National
Appliance Energy Conservation Act (NAECA) of 1992. They also
comply with the latest editions of the B.O.C.A. National Codes,
C.E.C., U.B.C., S.B.C.C., C.A.B.O. and the H.U.D. standards. All models
design-certified by CSA International according to ANSIZ21.10.1-CSA 4.1
standards governing storage-type water heaters.
SRGSS03610 Revised August 2011
RESIDENTIAL
HIGH EFFICIENCY RESIDENTIAL GAS MODELS
BTU
FIRST
HOUR
MODEL
NUMBER SERIES
TALL MODELS
GS6 40 YBFT 100 67
GS6 50 YBFT 100 81
SHORT MODELS
GS6 40 YBFS 100 67
Recoveries are rounded to nearest gallon
Water Connections - 3/4” on all models
External heat trap nipples are factory-installed on all models
When ordering top-mounted T&P Valve, add “G” to model number (GS6 40 YBFT G
All models are certified from sea level to 10,100 ft. elevations
*Propane (LP) gas - 37,000 BTU input for 50-gallon models and 36,000 BTU for 40-gallon models
RATING
GALLONS
ENERGY
FAC TOR
GALLON
CAPACITY
(EF)
.67 40 40,000 42 2 64-1/4 58-1/4 20 13 8 51-3/4 3 or 4 152
.67 50 40,000 42 2 63-1/2 57-1/4 22 13 8 50-1/4 3or4 167
.67 40 40,000 42 2 54 47-3/4 22 13 8 41 3 or 4 149
ANODE ROD*
HOT
CONNECTION
INPUT
PER
HOUR
NATURAL
*
)
RECOVERY
90°F RISE
GALLONS
PER HOUR
FOAM
THICKNESS
(INCHES)
DIMENSIONS IN INCHES
DRAFT
HOOD
OUTLET
APPROX.
SHIPPING
WEIGHT
(LBS)A B C D E F
T&P VALVE
1/2" GAS
CONNECTION
COLD
CONNECTION
E
C
A
B
F
D
For complete information on limited warranties, consult written warranty or contact technical support at 1-800-365-0024.
State Industries, Inc., reserves the right to make product changes or improvements without prior notice.
For more information on Select®contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
1-800-365-0024 Toll-free USA
www.statewaterheaters.com
SRGSS03610 Revised August 2011 © 2011 State Industries, Inc. Printed in U.S.A