RESIDENTIAL
PREMIER
SL
STANDARD VENT GAS WATER HEATER
®
Side-Mounted
Recirculating Taps
s For installation with combination space
heating / potable water heating applications
or any system requiring a recirculating hot
water loop
Intelligent Control Logic
s The internal microprocessor provides
enhanced operating parameters and tighter
differentials for precise sensing and faster
heating response to optimize performance
Self-Powered Electronic
Gas Valve
s Uses a thermopile to generate the power
needed
to operate the electronic gas control
without requiring an external power source
Diagnostics
s The electronic gas control incorporates an
LED status indicator that monitors system
operation & service diagnostics
Automatic SedimentCleaning System
s Specially designed dip tube directs incoming
cold water to create turbulence in the tank, to
reduce lime and sediment buildup
s Diffuser Dip Tube helps maximize tank life,
maintain high energy efficiency and increases
ho
t water output
s Made from long-lasting PEX cross-linked
polymer
Green Choice
®
“Eco-Friendly” Gas Burner
s Patented design reduces NOx emissions by
up to 33% and meets less than 40 ng/j
requirement for low NOx emissions
Push Button Piezo Ignitor
s Makes lighting pilot fast and easy with one-
hand push-button spark ignition
s Standard on all FVIR compliant models
Heat Trap Nipples
s Standard on all models
Durable, Tamper-Resistant
Brass Drain Valve
“Environmentally-Friendly”
Non-CFC Foam Insulation
s Reduces standby heat loss and
improves efficiency
Blue Diamond®Glass
Coating
s Provides superior corrosion resistance
compared to industry-standard glass lining
CSA Certified and ASME
Rated T&P Relief Valve
s Top-mounted T&P relief valve available as
an option
FVIR Compliant Design
s See other side
Design-Certified by CSA
International
s According to ANSI Z21.10.1 - CSA 4.1
Standards governing storage-type
water heaters
10-Year Limited Tank
and Parts Warranty
Series 300/301
®
For more information on Premier®SL contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
1-800-365-0024 Toll-free USA
www.statewaterheaters.com
Premium Anode Rods
s Anodes have a stainless steel core to protect
tank against corrosion longer
Code Compliance - UBC, CEC, SBCC, CABO, HUD, BOCA National Codes. Meets the
thermal efficiency and standby loss requirements of the U.S. Department of Energy
and current edition of ASHRAE/IESNA 90.1. and meets the Federal Energy
Efficency Standards effective January 20, 2004, according to the National
Appliance Energy Conservation Act (NAECA) of 1992.
SRGSS04211
RESIDENTIAL
PREMIER®SL – STANDARD VENT GAS
WATER HEATER
MODEL
NUMBER
GALLON
CAPACITY
ENERGY
FACTOR
(EF)
BTU INPUT
PER HOUR
NATURAL*
RECOVERY
90°F RISE
GALLONS
PER HOUR
BTU OUTPUT
PER HOUR
NATURAL
FIRST
HOUR
RATING
DIMENSIONS IN INCHES
A B C D E F G H
GPX 40 YXRT L 40 0.63 40,000 41 30,400 70 61-3/4 58-1/4 20 13 8 51-3/4 14-1/4 51-3/4 150
GPX 50 YXRT L 50 0.62
*Propane Gas - GPX 40 YXRT L: 36,000 BTU; GPX 50 YXRT L: 37,000 BTU
Recoveries capacity based on actual performance tests
When Ordering Propane (LP), replace the "Y" with an "H" (Example: GPX 40 H
Models are certified from sea level to 10,100 ft. elevations.
Flammable Vapor Ignition Resistant (FVIR) Water Heaters
State FVIR design meets or exceeds the American National Standards Institute standards
(ANSI Z21.10.1 - CSA 4.1) that deal with the accidental or unintended ignition of
flammable vapors, such as those emitted by gasoline.
Feature a sealed combustion chamber with air intake filter and a flame arrestor built into
40,000 41 30,400 88 61 57-1/4 22 13 8 50-1/2 14-1/4 50-1/2 165
XRT L).
$12'( 52'
237,21$/ 73
/2&$7,21
+27
&211(&7,21
&2/'
&211(&7,21
(
&
the water heater base. In addition, a thermal cutoff (TCO) device, is designed to shut off
gas flow to the burner and pilot if poor combustion is detected.
73 9$/9(
$
%
*$6
&211(&7,21
'
+
*
APPROX.
SHIPPING
WEIGHT
(LBS)
* Location for optional top-mounted
T&P Valve if ordered from factory.
Maximum hydrostatic working
pressure: 150 psi
If flammable vapors accidentally enter the
combustion chamber, the arrestor is designed so
flames burn off the top surface and cannot escape
down through the arrestor.
A. Industry standard thermopile
B. Large View Port for easy burner inspection
C. 360° combustion air filter
D. Thermal Cutoff (TCO) with manual reset
For complete information on limited warranties, consult written warranty or contact technical support at 1-800-365-0024.
State Industries, Inc., reserves the right to make product changes or improvements without prior notice.
For more information on Select®SL contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
1-800-365-0024 Toll-free USA
www.statewaterheaters.com
SRGSS04211 © 2011 State Industries, Inc. Printed in U.S.A