Star Manufacturing STO2, ST02 Installation Manual

TOASTER

MODEL

STO2 & STO4

Installation and

Operation

Instructions

2M-Z2134 Rev. F 7/20/06

STO2

STO4

1

SAFETY SYMBOL

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change specifi cations and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifi cations contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in
connection with such use.

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Please record the model
number, serial number, voltage and purchase date in the area below and have it ready when you call to

ensure a faster service.

Model No.

Serial No.

Voltage

Purchase Date

Authorized Service Agent

Reference the listing provided with the unit

or

for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]
Telephone: [phone] Local [phone]

The Star Service Help Desk

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone] Local [phone]

Fax: [phone] Local [phone]

E-mail [e-mail]

[e-mail]
[e-mail]

Website: www.star-mfg.com

Mailing Address: Star Manufacturing International Inc.

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

2

SPECIFICATIONS:

STO2-120V
Type: Two Slot Pop-Up Toaster, 1 Control

Voltage: 120V AC, 60 HZ, Wattage: 900W, Amps: 7.5A
Plug Type: Nema 5-15P
Approximate weight: installed - 9 Lb (4.1 kg), shipping - 11 Lb, (5 kg)
Dimensions: 6" - Width, 10" - Depth, 9" - Height
(15.2 cm - Width, 25.4 cm - Depth, 22.9 cm - Height)

STO4-120V (UL) and 120V (C-UL)
Type: Four Slot Pop-Up Toaster, 2 Controls

Voltage: 120V AC, 60 HZ, Wattage: 1800W, Amps: 15A
Plug Type: Nema 5-15P (UL), Nema 5-20P (CUL)
Approximate weight: installed - 13 Lb (5.9 kg), shipping - 15 Lb, (6.8 kg)
Dimensions: 10 1/8" - Width, 10" - Depth, 9 1/16" - Height
(25.7 cm - Width, 25.4 cm - Depth, 23 cm - Height)

STO4H-240V
Type: Four Slot Pop-Up Toaster, High Performance, 2 Controls

Voltage: 240V AC, 60 HZ, Wattage: 2400W, Amps: 10A
Plug Type: Nema 6-15P
Approximate weight: installed - 13 Lb (5.9 kg), shipping - 15 Lb, (6.8 kg)
Dimensions: 10 1/8" - Width, 10" - Depth, 9 1/16" - Height
(25.7 cm - Width, 25.4 cm - Depth, 23 cm - Height)

STO4H-208V
Type: Four Slot Pop-Up Toaster, High Performance, 2 Controls

Voltage: 208V AC, 60 HZ, Wattage: 2400W, Amps: 11.5A
Plug Type: Nema 6-15P
Approximate weight: installed - 13 Lb (5.9 kg), shipping - 15 Lb, (6.8 kg)
Dimensions: 10 1/8" - Width, 10" - Depth, 9 1/16" - Height
(25.7 cm - Width, 25.4 cm - Depth, 23 cm - Height)

3

GENERAL INSTALLATION DATA

CAUTION

This equipment is designed and sold for commercial use only by personnel trained and
experienced in its operation and is not sold for consumer use in and around the home nor
for use directly by the general public in food service locations.

INSTALLATION

These models are equipped for the voltage and wattage indicated on the nameplate. These
units are designed to operate on alternating current (A.C.), two wire single phase service
only and are equipped with an approved lead in cord set with a three prong grounding type
plug.

WARNING

DO NOT CONNECT TO ANY OTHER TYPE OF VOLTAGE OR THE MACHINE
WILL BE SERIOUSLY DAMAGED.

For best results use 2 day old bread. Some breads will toast better if dropped in sideways

or upside down. Different brands of bread will have various toasting qualities. Very fresh
or moist bread of uneven texture and bread that is not sliced evenly will not make good
toast. Avoid use of small unevenly cut slices. When using different kinds of bread, it may
be necessary to change the timer adjustment to get the desired color. Sliced bread that has
been opened will be dryer on one side than the other and it will toast darker on the dryer

side.

CAUTION

DO NOT USE FOREIGN OBJECTS TO REMOVE THE TOAST. DOING SO MAY
CAUSE DAMAGE TO THE ELEMENTS OR POSSIBLE LOSS OF LIFE.

OPERATING PROCEDURE

This toaster has a unique toast-bun switch which allows the user to toast bread on both
sides when in the "toast" position or on one side only in the "bun" position. One sided
toasting can be used for items such as a bun or bagel. One sided toasting occurs on
each of the two slices facing the middle elements. Push the rocker switch down on the
bun end for one sided toasting. Also, each two-slice section in the four-slice model is
separately controlled with individual controls and operating levers. For fi rst toasting, set
adjustment knob as shown in Fig. 1 between "Light and Dark." Drop bread in toasting
wells. Press down front handle as far as it will go. This automatically lowers the bread,
turns on the heating elements and starts the timing. When toast is fi nished it will pop up and
automatically turn off the heaters. If toast is too dark, move adjustor knob counterclockwise
toward "Light" and clockwise toward "Dark" if toast is too light. Then try it again with two
fresh slices of bread. After you once determine the correct setting, no further adjustments
are necessary unless different kinds of bread are used. The fi rst one or two cycles will be
slower due to a cold toaster. Toast times will shorten as the toaster warms up. The color

control will automatically correct for this warmup.

4