Star Manufacturing SDW1 Parts List

HEAVY DUTY DRAWER

STYLE FOOD WARMERS

MODELS

SDW1 SDW2 SDW3
SDW1N SDW2N SDW3N
SDW1W SDW2C SDW3C
SDW2W SDW2NC SDW3NC

Installation and

Operation

Instructions

2M-Z4061 Rev. C 8/15/05

SDW3NC

1

SAFETY SYMBOL

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change specifi cations and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifi cations contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in
connection with such use.

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Please record the model
number, serial number, voltage and purchase date in the area below and have it ready when you call to

ensure a faster service.

Model No.

Serial No.

Voltage

Purchase Date

Authorized Service Agent

Reference the listing provided with the unit

or

for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]
Telephone: [phone] Local [phone]

The Star Service Help Desk

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone] Local [phone]

Fax: [phone] Local [phone]

E-mail [e-mail]

[e-mail]
[e-mail]

Website: www.star-mfg.com

Mailing Address: Star Manufacturing International Inc.

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

2

SPECIFICATIONS

SDW1, SDW1N, SDW1W

Capacity: 1 Full Size Standard Food Pan (12 x 20 x 6)
Electrical: 120 Volt, 60 Cycle, Single Phase, 475 Watts
NEMA 5-15P Attachment Plug
220/240 Volt, 50/60 Cycle, Single Phase, 403/475 Watts
CEE 7/7 Attachment Plug
Dimensions: SDW1, 1W 29 1/4” - Length x 21 13/16” - Depth x 11 1/4” - Height
(74.3 cm - Length x 55.4 cm - Depth x 28.58 cm - Height)
SDW1N 21 1/4” - Length x 29 13/16” - Depth x 11 1/4” - Height
(53.98 cm - Length x 75.72 cm - Depth x 28.58 cm - Height)

SDW2, SDW2C, SDW2N, SDW2NC, SDW2W

Capacity: 2 Full Size Standard Food Pans (12 x 20 x 6)
Electrical: 120 Volt, 60 Cycle, Single Phase, 925 Watts
NEMA 5-15P Attachment Plug
220/240 Volt, 50/60 Cycle, Single Phase, 781/925 Watts
CEE 7/7 Attachment Plug
Dimensions: SDW2, 2C, 2W 29 1/4” - Length x 21 13/16” - Depth x 24 7/16” - Height
(74.3 cm - Length x 55.4 cm - Depth x 62.07 cm - Height)
SDW2N, 2NC 21 1/4” - Length x 29 13/16” - Depth x 24 7/16” - Height

(53.98 cm - Length x 75.72 cm - Depth x 62.07 cm - Height)

SDW3,SDW3C, SDW3N, SDW3NC

Capacity: 3 Full Size Standard Food Pans (12 x 20 x 6)
Electrical: 120 Volt, 60 Cycle, Single Phase, 1,375 Watts
NEMA 5-15P Attachment Plug
220/240 Volt, 50/60 Cycle, Single Phase, 1,159/1,375 Watts
CEE 7/7 Attachment Plug
Dimensions: SDW3, 3C 29 1/4” - Length x 21 13/16” - Depth x 34 5/8” - Height
(74.3 cm - Length x 55.4 cm - Depth x 78.94 cm - Height)
SDW3N, 3NC 21 1/4” - Length x 29 13/16” - Depth x 34 5/8” - Height
(53.98 cm - Length x 75.72 cm - Depth x 78.94 cm - Height)

Note: “N” versions have the pan positioned with the 20” dimension front to back.

3

This equipment is designed and sold for commercial use only by personnel trained and
experienced in its operation and is not sold for consumer use in and around the home nor for
use directly by the general public in food service locations.

CAUTION

INSTALLATION AND OPERATING INSTRUCTIONS

WARNING

These models are equipped for the voltage and wattage indicated on the nameplate.
They are designed to operate on alternating current, two wire single-phase service
only. A three wire grounding cord with a three-prong attachment plug is provided.

DO NOT CONNECT TO DIRECT CURRENT (DC).

INSTALLATION

1. Single drawer units are supplied with 1” feet pre-assembled to the unit. Two and three
drawer units are supplied with 4” feet. These feet must be assembled to the bottom of the
unit once the shipping pallet has been removed. Do not install without the feet provided.
Contact the factory or one of its representatives for optional 4” feet for single drawer
units.

2. Place the unit on a fl at level surface.

3. Thoroughly clean the unit before placing it in service. Remove the drawer by extending
it fully then lifting slightly on the front of the drawer to clear the drawer stop. Replace the
drawer by reversing this procedure. See Figure 1 below.

Figure 1

4. Connect the power cord to the appropriate receptacle.

5. Units of the same series (either narrow or wide construction) can be stacked directly
on each other when the feet are removed. Do not stack more than four drawers high.
To prevent a tipping hazard do not open more than one heavily loaded drawer at a time.
Do not place more than 30 lbs. of food in each drawer.

CAUTION

DO NOT IMMERSE THE UNIT IN WATER. DO NOT USE PRESSURIZED WATER
TO CLEAN THE UNIT. DO NOT ALLOW ANY LIQUID TO ENTER THE CONTROL
COMPARTMENT THROUGH THE LOUVERED AIR OPENINGS.

CLEANING

1. Disconnect the unit from the electrical power source before cleaning.

2. Allow the unit to cool thoroughly before cleaning. Avoid contact with the heated parts of
the unit.

3. Clean the unit daily. Use a soft cloth and mild detergent to keep the stainless steel
panels free of scratches. If an abrasive cleaner is used rub in the direction of the grain
to prevent unsightly scratches to the fi nish.

4

OPERATION

1. The temperature control will regulate temperatures inside the drawer cavity and is adjustable
from 100° to 200°F. Pressing the ON/OFF button of the temperature control activates the
unit. This control will provide close regulation of the temperature in the drawer and give
an indication of the food temperature. The setpoint is displayed by pressing and holding
the TEMP button. Adjust the regulated temperature by pressing the + or – buttons while
holding the TEMP button down. The actual drawer temperature is displayed when no
buttons are pressed and the control is in the ON mode. The dot in the lower corner of the
display indicates when the control is calling for heat.

CAUTION
FOOD TEMPERATURE WILL VARY FROM THE CONTROL SET TEMPERATURE
BASED ON THE MOISTURE CONTENT AND CONSISTENCY OF THE FOOD
PRODUCT

2. Each drawer is equipped with a moisture control. Turn the black knob above the drawer
handle ¼ turn to the left to free the control adjustment. Slide the knob to align the holes
in the drawer front and vent any excess moisture to produce a crisp product. Position the

knob so that the holes are closed to produce a moist product.

Lock the control in position by turning the knob ¼ turn to the right. Different combinations

of food products and heat settings will require different moisture settings. Breads and
rolls are diffi cult to hold for prolonged periods of time because of the low moisture content of
the product. These products are best held between 120° and 140°F. To retain the moisture
of these products place them in a plastic bag when in the warmer. Time and experience
is required to determine the optimum combination of temperature and moisture setting to
provide a palatable product that will hold for an extended period of time.

3. Preheat the unit for ½ hour before placing food in the warmer. This unit is intended to
hold hot food at the proper serving temperature. Foods should be heated to the proper
temperature prior to being placed in the warmer. Most meat and poultry foods are best
held between 160° and 175°F.

4. Optimum holding temperatures for specifi c foods are based on the products moisture content,
product density, volume and proper serving temperature. Safe sanitary temperatures must
be considered when determining the length of time a product can be held and remain
palatable. Allow foods that are heated to extreme temperatures during preparation to cool

before being placed in the warmer to prevent the accumulation of excess condensation.

CAUTION
TO PREVENT A TIPPING HAZARD AND POTENTIAL BODILY INJURY DO NOT

OPEN MORE THAN ONE HEAVILY LOADED DRAWER AT A TIME. IT IS
NOT RECOMMENDED TO PLACE MORE THAN 30 LBS OF FOOD IN EACH
DRAWER.

5

Visit our Website at: www.star-mfg.com Email: [e-mail]

THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL

This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in
which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the
transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty
status of the unit.

LIMITED EQUIPMENT WARRANTY

All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is
limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited
to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below)
should be taken to the closest Star service agency, transportation prepaid.

> Star will not assume any responsibility for loss of revenue.

> On all shipments outside the United States and Canada, see International Warranty.

* The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.

* The warranty period for the Chrome-Max Griddles is five (5) years on the griddle surface. See detailed warranty provided with unit.

* The warranty period for Teflon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to

Teflon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners. This warranty does not apply to the
“non-stick” properties of such materials.

> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts

and ninety (90) days on labor.

> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or

the Service Center's sub-agency.

> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and

Operating instructions.

> This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.

PARTS WARRANTY

Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted. Labor to replace the part is
chargeable to the customer.

SERVICES NOT COVERED BY WARRANTY

1. Travel time and mileage rendered beyond the 50 mile radius limit

2. Mileage and travel time on portable equipment (see below)

3. Labor to replace such items that can be replaced easily during a daily cleaning
routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.

4. Installation of equipment

5. Damages due to improper installation

6. Damages from abuse or misuse

7. Operated contrary to the Operating and Installation Instructions

8. Cleaning of equipment

9. Seasoning of griddle plates

PORTABLE EQUIPMENT

Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:

* The Model 510FD Fryer.
* The Model J4R, 4 oz. Popcorn Machine.
* The Model 518CMA & 526CMA Cheese Melter.
* The Model 12MC & 15MC & 18MCP Hot Food Merchandisers.
* The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.
* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
* All Condiment Dispensers except the Model HPDE, & SPDE Series Dispenser.
* All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
* All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.

The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.

FOR ASSISTANCE

Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.

In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.

10 . Voltage conversions
11 . Gas conversions
12 . Pilot light adjustment
13 . Miscellaneous adjustments
14 . Thermostat calibration and by-pass adjustment
15 . Resetting of circuit breakers or safety controls or reset buttons
16 . Replacement of bulbs
17 . Replacement of fuses
18 . Repair of damage created during transit, delivery, &

installation OR created by acts of God

ALL:
* Pop-Up Toasters
* Butter Dispensers
* Pretzel Merchandisers
* Pastry Display Cabinets
* Nacho Chip Merchandisers
* Accessories of any kind
* Sneeze Guards
* Pizza Ovens
* Heat Lamps
* Pumps

Part# 2M-4497-2 05/06 RB

6