Sta-Rite PNE User Manual
PN series – corrosion-resistant
Self-Priming Shallow Well Jet Pumps
FEATURES
Quality Construction – Fiberglass-
reinforced thermoplastic body
provides total corrosion resistance
and high resistance to abrasion.
Built-in Jet – Shallow-well jet has
corrosion-resistant polypropylene
nozzle and venturi.
Impeller – Precision-molded for
perfect balance… ultra-smooth for
highest performance and efficiency.
Precision Molded Diffuser –
Polypropylene diffuser allows pump
to prime faster, handle more air.
Heavy-duty Motor – Stainless
steel shaft and dual heavy-duty
ball bearings.
Heavy-duty Ball Bearings –
Shielded, permanently lubricated
bearings, extensively tested to
ensure extended life and smooth,
quiet operation.
Dual Voltage Capability – Dual
voltage motors are shipped at the
230 Volt setting.
Professional Quality, Pre-set
30-50 PSI – Allows for cut-in
pressure adjustments.
New Nozzle Clean-out – Easy
plug removal and access for ease
of service.
New Drain Plug – Bottom-mounted
for easy draining and winterization.
PN Series Shallow Well Jet Pumps
are corrosion- and abrasionresistant and are ideal for
wells with pumping levels of
25' or less.
Self-priming after the pump
housing is initially filled with
water.
Capacities to 18 GPM. Available
in 1/2, 3/4 and 1 HP models.
Supplied with the industry
standard 30-50 pressure switch
setting.
UL778/CSA108
APPLICATIONS
■
Water Systems
■
Booster Pump
■
Marine Use
■
Mist Sprayers – Poultry
■
Fountains and Water Features
SPECIFICATIONS
Body and Seal Plate – Fiberglass-
reinforced thermoplastic
Impeller – Engineered polymer
Base – 12-gauge steel
Nozzle, Venturi, Diffuser –
Polypropylene
ORDERING INFORMATION
Catalog Motor Wt.
Number HP Description Suct. Disch. Voltage Lbs./Kg.
PNC 1/2 Shallow Well Jet 1-1/4" 1" 115/230 21/9.5
PND 3/4 Shallow Well Jet 1-1/4" 1" 115/230 24/11
PNE 1 Shallow Well Jet 1-1/4" 1" 115/230 26/12
Customer Service: (888) 782-7483
Pipe Tapping Sizes
Fax Orders: (800) 426-9446 www.sta-rite.com
•
Approx.
1
•
PRO-Source™ is a trademark of
Pentair Water.
In order to provide the best products
possible, specifications are subject
to change.
Pentair Water
Delavan, WI 53115 USA
•
•
S4507WS (5/11)
200
175
150
125
100
75
50
25
60
50
40
30
20
10
0
TOTAL HEAD IN FEET
CAPACITY LITERS PER MINUTE
TOTAL HEAD IN METERS
10 90807060504020030
0510 15 2520
CAPACITY GALLONS PER MINUTE
5'
15'
25'
5'
15'
5'
15'
25'
25'
PND
PNC
PNE
PN series – corrosion-resistant
Self-Priming Shallow Well Jet Pumps
OUTLINE DIMENSIONS
“L”
1” NPT
[167.6]
6.60
1/4”
NPT
[254.0]
10.00
[143.0]
ø5.63
[104.8] 4.13
PUMP PERFORMANCE – 10 GPM
Customer Service: (888) 782-7483
[62 0]
2 44
[34 9]
1 38
[22 4]
88
“A”
[185.9]
7.32
[227.6]
8.96
9.76
Dimensions (in inches) are for estimating purposes only.
[10.2]
.40
[142.7]
[50 7]
5.62
2 00
[38 1]
1 50
[50.8]
2.00
[69.9]
2.75
[124.0]
4.88
[12.7]
ø.50
[247.9]
PUMP PERFORMANCE
Total
Catalog Suction Off
Number HP Lift Ft/M
5/1.5 8.5/32.2 7.4/28.0 5.2/19.7
10/3.0 7.1/26.9 6.4/24.2 5.1/19.3
PNC 1/2 15/4.6 6.5/24.6 6.1/23.1 4.5/17.0 77/5.30
Fax Orders: (800) 426-9446 www.sta-rite.com
•
20/6.1 5.4/20.4 5.1/19.3 4.1/15.5
25/7.6 4.1/15.5 4.0/15.1 3.4/12.9
5/1.5 12.1/45.8 10.7/40.5 8.5/32.2
10/3.0 10.7/40.5 10.2/38.6 8.4/31.8
PND 3/4 15/4.6 9.0/34.1 8.5/32.2 8.1/30.7 78/5.37
20/6.1 7.6/28.8 7.3/27.6 7.1/26.9
25/7.6 5.3/20.1 5.7/21.6 5.1/19.3
5/1.5 18.0/68.1 16.8/63.6 13.5/51.1
10/3.0 17.1/64.7 16.1/60.9 13.4/50.7
PNE 1 15/4.6 14.9/56.4 14.4/54.5 13.0/49.2 67/4.62
20/6.1 12.6/47.7 12.2/46.2 12.0/45.4
25/7.6 8.8/33.3 8.5/32.2 8.1/30.7
Pumps will operate at all depths shown, with pressure switch set
at 30-50 PSI. Tested and rated in accordance with Water Systems
Council Standards.
NOTE: Pumps installed with a PRO-Source™ tank require a 100 PSI
2
[44.5]
1.75
60.6
2.38
1/4” NPT
PLUG
[98.4]
3.87
[214.0]
8.43
Cat. No. L (in/cm) A (in/cm)
PNC 19.4/49.3 17.9/45.5
PND 20.1/51.2 18.7/47.4
PNE 20.6/52.4 19.2/48.7
(Capacity in Gallons/Liters Per Minute)
Discharge Pressure PSI / Bar
30/2.1 40/2.8 50/3.5
relief valve. Pumps installed with a conventional tank
require a 75 PSI relief valve. Relief valve must be capable
of relieving entire flow of pump at relief pressure.
Pentair Water
•
Delavan, WI 53115 USA
•
Shut
S4507WS (5/11)
•
PSI / Bar
Loading...