Sta-Rite JP User Manual

4" Submersible Pumps

®

JP composite series

Precision-engineered, corrosion­resistant Signature 2000®
Composite Pumps in 10, 15, 20
and 30 GPM deliver efficient,
dependable performance even in
rough, aggressive water. Heads
to over 650 feet and capacities
to 45 GPM. Built to deliver long­term, trouble-free service.

These pumps feature the proven
SignaSeal™ staging system.
Floating impeller design resists
sand and reduces sand locking.

APPLICATIONS

■

Water systems… for residential,
industrial, commercial, multiple
housing and farm use.

SPECIFICATIONS

Shell – Stainless steel
Diameter – 3-7/8"
Discharge – Fiberglass-reinforced

thermoplastic

Discharge Bearing – Nylatron®
Intermediate Bearing – (On larger

units) Polycarbonate, nitrile rubber
and stainless steel

Impellers – Acetal
Diffusers – Polycarbonate
Suction Caps – Polycarbonate with

stainless steel insert

Thrust Pads – Proprietary spec.
Shaft and Coupling – Stainless

steel
Intake – Fiberglass-reinforced

thermoplastic

Intake Screen – Polypropylene
Cable Guard – Stainless steel
Check Valve – Acetal
Agency Listings – CSA

FEATURES

Proven Staging System – Our

proven SignaSeal staging system
incor po rates a harder-than-sand
ceramic wear surface that when
incorporated with our floating
impeller design, greatly reduces
problems with abrasives, sand
lock-up and running dry.

Discharge – Corrosion-resistant
fiberglass reinforced thermoplastic
for dura bility in aggressive water.
Large octagon wrench area for ease
of installation.

Discharge Bearing – Exclusive
self-lubricating Nylatron bearing
resists wear from sand.

Intake – Corrosion-resistant fiber­glass reinforced thermoplastic for
durability in aggressive water.

Shaft – Positive drive from 7/16"
hex agonal heavy-duty 300 grade
stainless steel.

Coupling – Stainless steel press
fit to pump shaft. Couples to all
standard NEMA motors.

Shell – Heavy-walled corrosion­resistant stainless steel. Threaded
for easy servicing.

Hardware – All screws, washers
and nuts are corrosion-resistant
300 grade stainless steel.

Check Valve – Durable internal
poppet type check valve.

Cable Guard – Corrosion-resistant
stainless steel guard protects motor
leads. Tapered ends prevent pump
from catching on well.

Intake Screen – Corrosion-proof
polypropylene.

PENTEK® XE Series

2 and 3 wire NEMA standard all
stainless construction water-filled
motors.

™

Motor –

Nylatron® is a registered trademark of Polymer Corp. PENTEK® and Signature 2000®
are registered trademarks of Pentair Water. PRO-Source™, SignaSeal™, TrimLine™ and
XE Series™ are trademarks of Pentair Water.

In order to provide the best products possible, specifications are subject to change.

Customer Service: [phone]

Fax Orders: [phone] www.sta-rite.com

•

1

•

Pentair Water

Delavan, WI 53115 USA

•

S4559WS (5/11)

•

4" Submersible Pumps

®

ORDERING INFORMATION

Assembled Pump Pump End Motor Control Box

Length*

Catalog
Number

Inches

Weight*
Pounds

GPM

10**

15**

20**

30**

Motor

Type

2 Wire

3 Wire

2 Wire

3 Wire

2 Wire

3 Wire

2 Wire

3 Wire

Stgs PH Volt

HP

1/2 7 1 115 S10P4JP05121 22-3/4 27-1/2 L10P4CJ 12-3/4 9 P42B0005A1 19
1/2 7 1 230 S10P4JP05221 22-3/4 27-1/2 L10P4CJ 12-3/4 9 P42B0005A2 19
3/4 10 1 230 S10P4JP07221 25-3/4 30-1/2 L10P4DJ 14-1/2 10 P42B0007A2 23

1 13 1 230 S10P4JP10221 28-3/4 34-1/2 L10P4EJ 16 10-3/4 P42B0010A2 25

1-1/2 17 1 230 S10P4JP15221 34-3/4 41-1/2 L10P4FJ 19-3/4 12-1/2 P42B0015A2 29

1/2 7 1 115 S10P4JP05131 22-3/4 27-1/2 L10P4CJ 12-3/4 9 P43B0005A1 19 SMC-IR0511 4
1/2 7 1 230 S10P4JP05231 22-3/4 27-1/2 L10P4CJ 12-3/4 9 P43B0005A2 18 SMC-CR0521 4
3/4 10 1 230 S10P4JP07231 25-3/4 30-1/2 L10P4DJ 14-1/2 10 P43B0007A2 21 SMC-CR0721 4

1 13 1 230 S10P4JP10231 28-3/4 34-1/2 L10P4EJ 16-1/4 10-3/4 P43B0010A2 23 SMC-CR1021 4
1 13 3 230 L10P4EJ 15-1/2 10-1/4 P43B0010A3

1 13 3 460 L10P4EJ 15-1/2 10-1/4 P43B0010A4
1-1/2 17 1 230 S10P4JP15231 33-1/2 41-1/2 L10P4FJ 19-3/4 12-1/2 P43B0015A2 27 SMC-CR1521 7
1-1/2 17 3 230 L10P4FJ 19-3/4 12-1/2 P43B0015A3 23
1-1/2 17 3 460 L10P4FJ 19-3/4 12-1/2 P43B0015A4 23

1/2 5 1 115 S15P4JP05121 22-1/4 27 L15P4CJ 12-1/4 9 P42B0005A1 19
1/2 5 1 230 S15P4JP05221 22-1/4 27 L15P4CJ 12-1/4 9 P42B0005A2 19
3/4 7 1 230 S15P4JP07221 25-3/4 31 L15P4DJ 14-1/2 10 P42B0007A2 23

1 9 1 230 S15P4JP10221 29-1/4 35 L15P4EJ 16-3/4 11 P42B0010A2 25
1-1/2 12 1 230 S15P4JP15221 35-1/4 43 L15P4FJ 20-1/4 13 P42B0015A2 29

1/2 5 1 115 S15P4JP05131 22-1/4 27 L15P4CJ 12-1/4 9 P43B0005A1 19 SMC-IR0511 4
1/2 5 1 230 S15P4JP05231 22-1/4 27 L15P4CJ 12-1/4 9 P43B0005A2 18 SMC-CR0521 4
3/4 7 1 230 S15P4JP07231 25-3/4 31 L15P4DJ 14-1/2 10 P43B0007A2 21 SMC-CR0721 4

1 9 1 230 S15P4JP10231 29-1/4 35 L15P4EJ 16-3/4 11 P43B0010A2 23 SMC-CR1021 4

1

10 3 230 L10P4EJ 15-1/2 10-1/4 P43B0010A3

1

10

3
1-1/2 12 1 230 S15P4JP15231 33-3/4 41 L15P4FJ 20-1/4 13 P43B0015A2 27 SMC-CR1521 7
1-1/2 12 3 230 L15P4FJ 20-1/4 13 P43B0015A3 23
1-1/2 12 3 460 L15P4FJ 20-1/4 13 P43B0015A4 23

3/4 5 1 230 S20P4JP07221 23-3/4 30 L20P4DJ 12-1/2 8-1/2 P42B0007A2 23

1 7 1 230 S20P4JP10221 27-1/4 34 L20P4EJ 14-3/4 9-3/4 P42B0010A2 25

1-1/2 9 1 230 S20P4JP15221 32 39 L20P4FJ 16-3/4 10-3/4 P42B0015A2 29

3/4 5 1 230 S20P4JP07231 23-3/4 30 L20P4DJ 12-1/2 8-1/2 P43B0007A2 21 SMC-CR0721 4

1 7 1 230 S20P4JP10231 27-1/4 34 L20P4EJ 14-3/4 9-3/4 P43B0010A2 23 SMC-CR1021 4
1 10 3 230 L10P4EJ 15-1/2 10-1/4 P43B0010A3

1 10 3 460 L10P4EJ 15-1/2 10-1/4 P43B0010A4
1-1/2 9 1 230 S20P4JP15231 30-1/2 39 L20P4FJ 16-3/4 10-3/4 P43B0015A2 27 SMC-CR1521 7
1-1/2 9 3 230 L20P4FJ 16-3/4 10-3/4 P43B0015A3 23
1-1/2 9 3 460 L20P4FJ 16-3/4 10-3/4 P43B0015A4 23

2 12 1 230 L20P4GJ 20-1/4 12-1/2 P43B0020A2 31 SMC-CR2021 7

2 12 3 230 L20P4GJ 20-1/4 12-1/2 P43B0020A3 23

2 12 3 460 L20P4GJ 20-1/4 12-1/2 P43B0020A4 23

1 5 1 230 S30P4JP10221 26-1/2 35 L30P4EJ 14 10 P42B0010A2 25
1-1/2 6 1 230 S30P4JP15221 30-1/2 39 L30P4FJ 15-1/4 11 P42B0015A2 29

1 5 1 230 S30P4JP10231 26-1/2 35 L30P4EJ 14 10 P43B0010A2 23 SMC-CR1021 4

1 10 3 230 L10P4EJ 15-1/2 10-1/4 P43B0010A3 23

1 10 3 460 L10P4EJ 15-1/2 10-1/4 P43B0010A4 23
1-1/2 6 1 230 S30P4JP15231 29 39 L30P4FJ 15-1/4 11 P43B0015A2 27 SMC-CR1521 7
1-1/2 6 3 230 L30P4FJ 15-1/4 11 P43B0015A3 23

1-1/2 6 3 460 L30P4FJ 15-1/4 11 P43B0015A4 23

2 8 1 230 L30P4GJ 18-1/4 12 P43B0020A2 31 SMC-CR2021 7

2 8 3 230 L30P4GJ 18-1/4 12 P43B0020A3 23

2 8 3 460 L30P4GJ 18-1/4 12 P43B0020A4 23

460 L10P4EJ 15-1/2 10-1/4 P43B0010A4

Catalog

Number

Length*

Inches

Weight*
Pounds

JP composite series

Catalog
Number

Weight*
Pounds

23
23

23
23

23
23

Catalog
Number

Weight*
Pounds

* Length and Weight are approximate.
**For 10 GPM, 15 GPM, 20 GPM, and 30 GPM discharge is 1-1/4" NPT.

NOTE: On 2 HP and larger pumps – Motor, Control Box or Magnetic Starter must be ordered separately.

Customer Service: [phone]

Fax Orders: [phone] www.sta-rite.com

•

2

Pentair Water

•

Delavan, WI 53115 USA

•

S4559WS (5/11)

•

4" Submersible Pumps

05

800

700

600

500

400

300

200

100

10 15 20

200

150

100

50

0

TOTAL HEAD IN FEET

CAPACITY GALLONS PER MINUTE

CAPACITY LITERS PER MINUTE

TOTAL HEAD IN METERS

10 7060504020030

1-1/2 HP

1 HP

3/4 HP

1/2 HP

800

700

600

500

400

300

200

100

0510

15

20

25

240

200

160

120

80

40

0

TOTAL HEAD IN FEET

CAPACITY GALLONS PER MINUTE

CAPACITY LITERS PER MINUTE

TOTAL HEAD IN METERS

30 90807060402010050

1-1/2 HP

1 HP

3/4 HP

1/2 HP

01050

800

700

600

500

400

300

200

100

CAPACITY GALLONS PER MINUTE

TOTAL HEAD IN FEET

20 30 40

2 HP

1-1/2 HP

1 HP

CAPACITY LITERS PER MINUTE

TOTAL HEAD IN METERS

16080400 120

200

150

100

50

0

CAPACITY GALLONS PER MINUTE

TOTAL HEAD IN FEET

0510 20 25 3015 35

800

700

600

500

400

300

200

100

CAPACITY LITERS PER MINUTE

TOTAL HEAD IN METERS

75 12550250 100

200

150

100

50

0

1-1/2 HP

1 HP

3/4 HP

2 HP

®

JP composite series

PUMP PERFORMANCE – 10 GPM

PUMP PERFORMANCE – 15 GPM

PUMP PERFORMANCE – 20 GPM

Customer Service: [phone]

PUMP PERFORMANCE – 30 GPM

Fax Orders: [phone] www.sta-rite.com

•

3

Pentair Water

•

Delavan, WI 53115 USA

•

S4559WS (5/11)

•

4" Submersible Pumps

3-7/8

Pump End

Assembled Pump

®

OUTLINE DIMENSIONS

JP composite series

Discharge

10 GPM 1-1/4" NPT
15 GPM 1-1/4" NPT
20 GPM 1-1/4" NPT
30 GPM 1-1/4" NPT

For lengths, refer to
Ordering Information
tables.

Dimensions (in inches) are for estimating purposes only.

Customer Service: [phone]

Fax Orders: [phone] www.sta-rite.com

•

4

Pentair Water

•

Delavan, WI 53115 USA

•

S4559WS (5/11)

•

®

JP composite series

4" Submersible Pumps

0 — — 14.1 13.5 12.8 12.0 10.8 9.5 7.4 4.7
20 14.0 13.3 12.7 12.0 11.0 9.6 7.8 5.2 1.4

40 12.4 11.7 10.8 9.7 8.2 8.8 2.0
50 11.5 10.5 9.4 7.8 5.8 2.2
60 10.4 9.2 7.5 5.4 2.8
0 — — — 14.8 14.4 13.8 13.0 12.0 11.0 8.4 4.7
20 — 14.7 14.3 13.7 13.0 12.2 11.2 9.9 8.6 5.0

40 14.2 13.5 12.9 12.1 11.3 10.2 8.9 7.4 5.3
50 13.4 12.7 12.0 11.0 10.2 8.9 7.4 5.5 3.2
60 12.6 11.9 11.0 10.0 9.1 7.5 5.7 4.4 1.4
0 — — — — 14.9 14.4 13.8 13.3 12.8 11.5 10.1 8.2 5.8 2.1
20 — — 14.7 14.4 14.0 13.4 12.9 12.3 11.7 10.2 8.3 6.0 2.6
1 30 — 14.7 14.4 13.8 13.4 12.9 12.3 11.7 11.0 9.4 7.4 4.6
40 14.6 14.2 13.8 13.3 13.0 12.5 11.8 11.1 10.3 8.5 6.2 3.0
50 14.1 13.7 13.3 12.9 12.4 11.8 11.1 10.2 9.5 7.4 4.8
60 13.7 13.2 12.8 12.4 11.9 11.2 10.3 9.5 8.7 6.3 3.2
0 — — — — — — 14.7 14.4 14.0 13.2 12.2 11.2 10.1 8.6 7.1 5.2 2.5
20 — — — — 14.8 14.4 14.0 13.6 13.2 12.4 11.3 10.2 8.7 7.3 5.3 2.8

40 — 15.0 14.7 14.4 14.1 13.7 13.3 12.8 12.4 11.4 10.2 8.9 7.3 5.5 3.0
50 14.9 14.6 14.3 14.0 13.6 13.2 12.8 12.4 12.0 10.8 9.7 8.2 6.5 4.5
60 14.5 14.3 14.0 13.6 13.3 12.8 12.4 12.0 11.5 10.2 9.0 7.5 5.6 3.3

Gallons per Minute

10

HP PSI

20 40 60 80 100 125 150 175 200 250 300 350 400 450 500 550 600 Feet PSI

30 13.2 12.6 11.8 10.9 9.8 8.0 5.5 1.7

1/2

30 14.4 14.2 13.7 13.0 12.3 11.2 10.0 8.8 7.2 3.0

3/4

30 — — — 14.7 14.4 14.0 13.6 13.2 12.8 11.9 10.7 9.6 8.1 6.4 4.4

1-1/2

PUMP PERFORMANCE

Pumping Depth in Feet

(Capacity in Gallons Per Minute)

Shut-Off

Head

255 110

340 147

467 202

636 275

CAUTION: DO NOT use pump at flow rates indicated by the symbol ‘—’. To do so can cause premature failure of unit. Pump
warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards.

NOTE: Pumps installed with a PRO-Source™ tank require a 100 PSI relief valve. Pumps installed with a conventional tank require

a 75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure.

Customer Service: [phone]

Fax Orders: [phone] www.sta-rite.com

•

5

Pentair Water

•

Delavan, WI 53115 USA

•

S4559WS (5/11)

•

®

JP composite series

4" Submersible Pumps

0 — 21.5 20.0 18.7 16.9 13.1 7.4

20 19.7 18.3 16.3 13.0 8.8

40 15.2 11.9 7.0
50 11.2 5.8
60 4.8
0 — — 21.2 20.2 19.3 17.8 16.0 13.2 9.6
20 20.9 19.9 19.0 17.7 16.4 13.7 10.0 4.9

40 18.6 17.5 15.9 13.5 10.9 6.0
50 17.2 15.4 13.1 10.0 6.4
60 15.0 12.7 9.7 5.5 1.8
0 — — — — 20.4 19.4 18.4 17.2 15.5 10.3 2.7
20 — 20.9 20.2 19.3 18.7 17.5 15.8 13.4 10.9 3.2
1 30 20.8 20.0 19.1 18.5 17.6 16.0 13.7 11.1 7.5
40 19.8 19.0 18.3 17.4 16.2 13.9 11.3 8.1 3.7
50 18.9 18.2 17.1 15.8 14.0 11.4 8.2 4.0
60 18.0 17.0 15.6 13.7 11.7 8.4 4.4
0 — — — — — 20.5 19.9 19.3 18.4 16.4 13.1 8.3 2.8
20 — — 21.2 20.5 20.0 19.3 18.6 17.6 16.5 13.5 9.1 3.2

40 21.0 20.2 19.8 19.2 18.7 17.9 16.7 15.5 13.7 9.4 3.6
50 20.2 19.7 19.2 18.6 18.0 16.8 15.6 13.8 11.9 6.7
60 19.6 19.0 18.5 17.7 16.9 15.7 13.9 12.0 9.7 3.8

Gallons per Minute

15

HP PSI

20 40 60 80 100 125 150 175 200 250 300 350 400 450 500 Feet PSI

30 18.0 15.6 12.4 7.9 2.0

1/2

30 19.8 18.8 17.6 16.1 14.0 10.7 5.5

3/4

30 — 21.1 20.3 19.9 19.3 18.7 17.7 16.6 15.4 11.7 6.3

1-1/2

PUMP PERFORMANCE

Pumping Depth in Feet

(Capacity in Gallons Per Minute)

Shut-Off

Head

175 76

245 106

318 138

420 182

CAUTION: DO NOT use pump at flow rates indicated by the symbol ‘—’. To do so can cause premature failure of unit. Pump
warranty void when failure occurs under these conditions.

Tested and rated in accordance with Water Systems Council Standards.
NOTE: Pumps installed with a PRO-Source™ tank require a 100 PSI relief valve. Pumps installed with a conventional tank require

a 75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure.

Customer Service: [phone]

Fax Orders: [phone] www.sta-rite.com

•

6

Pentair Water

•

Delavan, WI 53115 USA

•

S4559WS (5/11)

•

4" Submersible Pumps

®

20

Gallons per Minute

PUMP PERFORMANCE

JP composite series

(Capacity in Gallons Per Minute)

HP PSI

0 — — — 26.9 23.5 19.0 13.7
20 — 25.8 22.5 18.5 14.5 3.4

3/4

40 21.3 17.6 13.0 3.0
50 17.2 11.4
60 10.2
0 — — — — — 25.3 22.4 18.8 15.5
20 — — — 25.1 22.8 19.5 16.1 10.1
1 30 — — 24.9 22.5 19.8 16.5 10.6
40 27.0 24.5 22.0 19.4 16.8 11.6 2.6
50 24.2 21.5 19.0 16.3 12.5 3.3
60 21.3 18.6 16.0 11.1 3.7
0 — — — — — — 26.4 24.0 21.6 16.4 5.4
20 — — — — 26.8 24.4 22.0 19.5 16.8 6.8

1-1/2
40 — — 26.2 24.3 22.3 19.8 17.3 14.2 8.0

50 — 26.0 24.1 22.1 20.0 17.5 14.5 8.3
60 25.6 23.9 21.9 19.8 17.5 14.8 9.1
0 — — — — — — — 27.3 26.0 23.2 20.2 16.2 8.5
20 — — — — — — 26.1 24.9 23.4 20.6 16.7 9.5
2 30 — — — — — 26.2 25.0 23.5 22.1 19.1 13.8 4.8
40 — — — — 26.4 25.1 23.7 22.2 20.8 17.2 10.1
50 — — 27.2 26.1 25.1 23.8 22.3 20.9 19.3 14.0 5.7
60 — 27.1 26.0 25.0 23.9 22.4 21.0 19.4 17.3 10.8

20 40 60 80 100 125 150 175 200 250 300 350 400 450 Feet PSI

30 25.2 22.0 18.3 13.9 4.5

30 — — — 26.5 24.7 22.2 19.6 17.1 13.9

Pumping Depth in Feet

Shut-Off

Head

180 78

251 109

323 140

435 188

CAUTION: DO NOT use pump at flow rates indicated by the symbol ‘—’. To do so can cause premature failure of unit. Pump
warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards.

NOTE: Pumps installed with a PRO-Source™ tank require a 100 PSI relief valve. Pumps installed with a conventional tank require a

75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure.

Customer Service: [phone]

Fax Orders: [phone] www.sta-rite.com

•

7

Pentair Water

•

Delavan, WI 53115 USA

•

S4559WS (5/11)

•

4" Submersible Pumps

®

30

Gallons per Minute

PUMP PERFORMANCE

JP composite series

(Capacity in Gallons Per Minute)

HP PSI

0 — — 40.9 39.1 36.8 32.5 26.0 8.0
20 40.4 38.8 36.0 32.4 27.7 13.3
1 30 38.0 35.3 31.7 26.3 14.3
40 35.0 31.4 25.9 12.1
50 30.2 24.0 3.0
60 21.9
0 — — 41.9 39.9 37.5 34.1 30.9 26.9 17.0
20 41.2 39.1 36.5 34.0 31.5 27.8 21.5

1-1/2

40 36.0 33.5 30.8 27.7 20.2
50 32.9 30.1 26.8 21.5
60 29.5 25.9 18.1
0 — — — 41.8 40.5 38.8 36.8 34.7 31.6 23.7
20 — 41.3 40.1 38.7 37.1 34.9 32.1 29.0 24.8
2 30 41.2 40.0 38.5 37.0 35.0 32.2 29.1 24.9 15.2
40 39.9 38.3 36.6 34.8 32.7 29.8 25.1 16.1
50 38.0 36.3 34.5 32.1 30.0 25.3 17.5
60 36.0 34.0 31.9 29.1 26.0 18.0

CAUTION: DO NOT use pump at flow rates indicated by the symbol ‘—’. To do so can cause premature failure of unit. Pump
warranty void when failure occurs under these conditions. Tested and rated in accordance with Water Systems Council Standards.

NOTE: Pumps installed with a PRO-Source™ tank require a 100 PSI relief valve. Pumps installed with a conventional tank require a

20 40 60 80 100 125 150 175 200 250 300 350 400 450 Feet PSI

30 38.9 36.1 33.8 31.0 27.9 21.8

75 PSI relief valve. Relief valve must be capable of relieving entire flow of pump at relief pressure.

Pumping Depth in Feet

Shut-Off

Head

175 76

210 91

280 121

Customer Service: [phone]

Fax Orders: [phone] www.sta-rite.com

•

8

Pentair Water

•

Delavan, WI 53115 USA

•

S4559WS (5/11)

•