Sta-Rite DC233110M User Manual

cast iron submersible sump pumps

DC233/

Rugged cast iron sump pumps
feature a vortex impeller to pro­vide solids-handling capability
up to 1/2". Product is available
in 1/3 or 1/2 HP, 115 Volt single
phase 60 Hz. Pump discharge
is 1-1/2" FNPT. Field-replaceable
piggy-back float switch: vertical
for minimum diameter 10" sumps,
or tethered for minimum diam­eter 14" sumps.

APPLICATIONS

■

Basement Sumps

■

Dewatering

■

Light Effluent

■

Water Transfer

ORDERING INFORMATION

Catalog Maximum Phase/ Cord Mechanical
Number HP Load Amps Volts Cycles Length Switch Type On Off

DC233110M 1/3 9.8 115 1/60 10' Manual — —

DC233110T 1/3 9.8 115 1/60 10' Tethered 13" 4"
DC233110V 1/3 9.8 115 1/60 10' Vertical 7" 2"

DC233120M 1/3 9.8 115 1/60 20' Manual — —

DC233120T 1/3 9.8 115 1/60 20' Tethered 13" 4"
DC233120V 1/3 9.8 115 1/60 20' Vertical 7" 2"
DC233130T 1/3 9.8 115 1/60 30' Tethered 13" 4"

DC250110M 1/2 12.5 115 1/60 10' Manual — —

DC250110T 1/2 12.5 115 1/60 10' Tethered 13" 4"
DC250110V 1/2 12.5 115 1/60 10' Vertical 7" 2"

DC250120M 1/2 12.5 115 1/60 20' Manual — —

DC250120T 1/2 12.5 115 1/60 20' Tethered 13" 4"
DC250120V 1/2 12.5 115 1/60 20' Vertical 7" 2"

Noryl® is a registered trademark of General Electric Co.
In order to provide the best products possible, specifications are subject to change.

Switch Setting

DC250

SERIES

SPECIFICATIONS

Motor – Oil-cooled 1/3 HP and

1/2 HP versions available, 115 Volts,
single phase, 60 Hz

Motor Cover/Volute – Cast iron
Lower Volute Base – Fiberglass

reinforced polypropylene

Switch – Tethered float or vertical
Power Cord – 10' or 20' grounded

three-prong, water-resistant, type
SJTW-A/SJTW

Discharge – 1-1/2" FNPT
Exterior Hardware – Stainless steel
Shaft Seal – Mechanical, carbon/

ceramic
Impeller – Fiberglass reinforced

Noryl® with threaded brass insert
Bearings – Upper sleeve and Lower

ball bearings, oil lubricated

Maximum Liquid Temperature
Limits – 130

F (55°C)

°

FEATURES

Switch – Tethered float switch

operates in sump diameters of 14"
or larger. Vertical switch design
with guard allows for operation in
sump diameters of 10" or larger.

Construction – Rugged cast iron
pump body and motor cover for
applications needing a durable pump.

Intake – Screened intake prevents
debris from entering the pump.

Oil-Cooled Motor – Transfers heat
to sump water efficiently while lubri­cating internal motor components.

Performance – Models range up to
62 gallons per minute at 5' of lift.

Anti Air Lock Hole – Built into
base; eliminates added labor.

Solids Handling Capability – 1/2"
Ball Bearings and Shaft Seal –

Lubricated and designed for long life.
Easy Serviceability – Pump intake

screen, impeller, base, switch, and
power cord are serviceable.

Customer Service: [phone]•Fax Orders: [phone]•www.pumps.com•Pentair Water•Delavan, WI 53115 USA•S5099SES

1

cast iron submersible sump pumps

3.67"

6.00"

1-1/2" NPT
DISCHARGE

4.60"

3.82" 3.47"

11.50"

14.5"

3.71"

1.00"

.16"

OUTLINE DIMENSIONS – VERTICAL FLOAT

Designed to fit 10" or larger basins.

1-1/2" NPT
DISCHARGE

11.50"

.16"

Dimensions (in inches) are for estimating purposes only.

OUTLINE DIMENSIONS – TETHERED FLOAT

Designed to fit 14" or larger basins.

1.50"

.88"

6.00"

4.60"

11.03"

8.94"

3.67"

3.82" 3.47"

Customer Service: [phone]•Fax Orders: [phone]•www.pumps.com•Pentair Water•Delavan, WI 53115 USA•S5099SES

Dimensions (in inches) are for estimating purposes only.

2