Stanley SB01AL Instruction Manual

12
ACCESORIOS
Los accesorios que se recomiendan para la herramienta están disponibles en su distribuidor local o en el centro de mantenimiento autorizado. Si necesita asistencia en relación con los accesorios, por favor contacto fabricante en (877) 571-2391.
ADVERTENCIA: El uso de cualquier accesorio no recomendado para el uso con esta aplicación podía ser
peligroso.
INFORMACIÓN DE SERVICIO
UNA GARANTÍA LIMITADA DEL AÑO
Fabricante garantiza este producto durante un año contra cualquier defectos en los materiales o mano de obra. El producto defectuoso será reemplazado o reparado en ningún cargo en cualquiera de dos maneras.
La primera opción, el reemplazo, es devolver el producto al comercio donde se lo adquirió (siempre y cuando se trate de un comercio participante). Las devoluciones deben realizarse conforme a la política de devolución del comercio (generalmente, entre 30 y 90 días posteriores a la venta). Prueba de compra puede ser necesaria. Consulte en el comercio acerca de la política especial sobre devoluciones una vez excedido el plazo establecido. La segunda opción es devolver el producto (pagados) al fabricante de reparación o sustitución en nuestra opción. Prueba de compra puede ser necesaria.
Esta garantía no se extiende a los accesorios. Esta garantía le concede derechos legales específicos; usted puede tener otros derechos que pueden variar según el estado o la provincia. Este producto no está diseñado para uso comercial.
ESPECIFICACIONES
Lámpara de taller: 20 blanco brillante LEDs Fuente de energía: 3 baterías alcalinos del “AA” (incluidas)
Importados por Baccus Global, 399 NW 2nd Avenue, Suite 150, Boca Raton, FL 33432 • (877) 571-2391
SD080510
20 LED FLEXIBLE WORK LIGHT
INSTRUCTION MANUAL
LÁMPARA FLEXIBLE DE TALLER DE 20 LED
MANUAL DE INSTRUCCIÓN
SAVE THIS INSTUCTION MANUAL FOR FUTURE REFERENCE. CONSERVE ESTE MANUAL PARA FUTURAS CONSULTAS.
© 2010 Baccus Global Boca Raton, FL 33432 (877) 571-2391
SB01AL
English page 3 Español página 8
SB01AL_Manual_ENSP_080510.indd 1-2 8/5/2010 11:10:43 AM
2
3
GENERAL SAFETY WARNINGS AND INSTRUCTIONS
READ ALL INSTRUCTIONS
WARNING: Read all instructions before operating spotlight. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not
avoided, may result in property damage. RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should always
be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed. Manufacturer strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed. Read and understand all warnings and operating instructions before using any tool or equipment.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK:
• Do not put light in water or other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.
• Keep light lamp away from materials that may burn.
• Do not clean this appliance with a water spray or the like.
CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
• Avoid dangerous environments:
– Don't use the light in damp or wet locations. This unit is NOT waterproof. Do not immerse light in
water or other liquids.
– Do not operate the light near flammable liquids or in gaseous or explosive atmospheres. Internal
sparks may ignite fumes causing personal injury.
1
3
4
7
10
FEATURES CARACTERÍSTICAS
5
12
11
2
8
9
6
1. Light mode pushbutton (high/medium/off/ flash)
2. 20 ultra bright LEDs
3. Flexible rubber groove stand
4. Back cover
5. Back cover screw
6. Magnetic discs (exposed to show details)
7. Battery compartment containing three (3) “AA” alkaline dry cell batteries (included)
8. Back cover screw hole
9. Battery strap
10. Light holder (locks light on stand)
11. Magnetic base
12. Attachment bar (for securing the light to the light holder)
1. Botón del modo ligero (alto/medio/apagado/ destella)
2. 20 ultra brillantes LEDs
3. Soporte de goma flexible
4. Contraportada
5. Tornillo de la contraportada
6. Discos magnéticos (expuesto para demostrar los detalles)
7. Compartimiento de batería que contiene tres (3) baterías alcalinas de la pila seca del “AA” (incluidas)
8. Agujero del tornillo de la contraportada
9. Correa de la batería
10. Sostenedor ligero (luz de las cerraduras en soporte)
11. Base magnética
12. Barra del accesorio (para asegurar la luz al sostenedor ligero)
SB01AL_Manual_ENSP_080510.indd 3-4 8/5/2010 11:10:45 AM
Loading...
+ 4 hidden pages