Stamina 55-1539A Owner's Manual

55-1539A

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

Owner's Manual

CAUTION: 1. Weight on this product should not exceed 300 lbs.

2. Class H equipment: This equipment is for home
use only. It is not for commercial use.

! WARNING !

Exercise can present a he alth
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.

When calling for parts or
service, please specify the
following number.

2008, 06

2008 Stamina Products, Inc.

2040 N. Alliance, Springfield, MO 65803

Customer Service

1 [phone]

www.staminaproducts.com

This Product is Produced Exclusively by

TABLE OF CONTENTS

Page Page
Safety Instructions 2
Before Y ou Begin 4
Equipment Warning & Notice Labels 5
Hardware Identification Chart 6
Assembly Instructions 7
Operational Instructions 11

Maintenance Instructions 13
Product Parts Drawing 14
Parts List 15
Warranty 17
Notes 18
Fax/Mail Ordering Form 19

SAFETY INSTRUCTIONS

Extreme obesity
Glaucoma, retinal detachment or conjunctivitis
Pregnancy
Spinal injury, Cerebral Sclerosis, or acutely swollen joints
Middle ear infection
High blood pressure, Hypertension, Recent stroke or Transient ischemic attack
Heart or circulatory disorders for which you are being treated
Hiatus hernia or Ventral hernia
Bone weaknesses including Osteoporosis, Unhealed fractures, Medullary pins, or
Surgically implanted orthopedic supports.
Use of anti-coagulants including Aspirin in high doses.

WARNING:

Before using this equipment you should consult with your personal physician to see if inversion

equipment is a ppropriate f or you. Do not use this equipment without your physicia n's approval. Do not
use this equipment if you have any of the following conditions or ailments:

2

WARNING:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

Do not use the Therapy Inversion System alone. Always have a helper available in case assistance is
needed in recovering from the decline position.
Make sure that the Therapy Inversion System is properly assembled before use. Pay close attention to Step
13 on page 10.
Make sure that the Pad T ubes a s a sse mbled with the ends pointed down a s directed in STEP 6 on page 8. The
ends must be pointed downward to properly secure the users feet in place during inversion. Improper a ssembly
will allow the users feet to come loose allowing the user to fall from the inversion table.
Do not use the Therapy Inversion System until you have verified your height setting. Failure to use the
proper height setting can result in dif ficulty recovering from the decline position. See HEIGHT ADJUSTMENT
instructions on page 11.
Always make sure that Heel Holder mecha nism is properly locked when using the Therapy Inversion Syste m.
Adjust the Nylon Straps to an angle of 15 to 20 degrees and use this setting until you have verif ied your height
setting and become familiar with the Therapy Inversion System.
You must understand how to recover from the fully inverted position before using the fully inverted position.
Read the RECOVER Y FROM LOCKED POSITION se ction at the bottom of page 13 BEFORE using the fully
inverted position.
Do not allow children to use or play on the Therapy Inversion System.
Keep small children and pets away from the Therapy Inversion System at all times.
The Therapy Inversion System should not be used by persons weighing more than 300 lbs.
The Therapy Inversion System should not be used by persons over 6 feet 6 inches tall.
Use the Therapy Inversion System only on a level surface.
W ear a ppropriate clothing when exercising; do not wear loose clothing that could become caught in the Therapy

Inversion System.

Be sure that there is enough room for the bed to rotate completely.
Use the Therapy Inversion System only as described in the manual.
The safety level of the Therapy Inversion System can be maintained only if it is examined regularly for
damage and wear.
This equipment is for home use only. It is not for commercial use.

To reduce the risk of serious injury, read the following safety instructions before
using the Therapy Inversion System.

THANK YOU FOR PURCHASING THE

Therapy Inversion System

To help you get started, we have pre-assembled most of your

Therapy Inversion System at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

With regular workouts you will be getting your body into sha pe

and be on your way to achieving a happier and healthier lifestyle.

3

Should you have any que stions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

CALL US FIRST

Customer Service

1(800) 375-7520

www.staminaproducts.com

TELEPHONE

CUSTOMER SERVICE

Tel: [phone]

FAX

CUSTOMER SERVICE

Fax: [phone]

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springfield, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

[e-mail]

[e-mail]

www.staminaproducts.com

BEFORE YOU BEGIN

4

Footrest

Right Pivot Arm

Lever

Height

Adjustment Beam

Foam Pad

Right Protective

Cover

Round Stand

Buckle Strap

Bumper
Heel Holder

Nylon Bed

Handrail

Rear Frame

Locking Knob

Handrail

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Wrench

Combination Wrench

Front Frame

Thank you for choosing the Therapy Inversion
System. W e take great pride in producing this quality

product and hope it will provide ma ny hours of quality
exercise to make you feel better, look better, and
enjoy life to its fullest.
It's a proven fact that a regular exercise program
can improve your physical and mental health. Too
often, our busy lifestyles limit our ti me and opportunity
to exercise. The Therapy Inversion System
provides a convenient and simple method to begin
your assault on getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and fa mili arize yoursel f with the parts that are
labeled.
Read this manual carefully bef ore using the Therap y

Inversion System.

Although Stamina constructs its products with the
finest materials and uses the highest standards of
manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
the parts included with your Therapy Inversion
System, please do not return the product. Contact
us FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to a ssist you from 7:30 A.M.
to 5:00 P .M. (Central T ime) Monday through Thursday
and 8:00 A.M. to 3:00 P.M. (Central Ti me) on Friday.
If you would like to contact us online, go to our
website at www.sta mina products.com a nd a ccess the
Customer Service section.
Be sure to have the na me and model number of the
product available when you contact us.

Warning Label

5

EQUIPMENT WARNING & NOTICE LABELS

This chart is provided to help identify the warning & notice labels on the Therapy Inversion System.
Please take a moment to familiarize yourself with all of the warning & notice labels.

Label is larger tha n actual size

WAR NING LABEL(61)

W1

6

Part No. and Description Qty

43 Bolt, Hex Head (M6 x 1 x 42mm) 1
44 Bolt, Hex Head (M6 x 1 x 47mm) 1

45 Bolt, Hex Head (M8 x 1.25 x 15mm) 2
46 Bolt, Hex Head (M8 x 1.25 x 25mm) 2

48 Nylock Nut (M6 x 1) 1
49 Nylock Nut (M8 x 1.25) 4

50 Washer (M6) 3
51 Washer (M8) 6
52 Large Washer (M8) 2
53 Large Washer (M6) 2

54 Bolt, Round Head (M6 x 1 x 10mm) 2

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
ends of the bolts, or screws on the circles to check for the correct di a meter . Use the small scale to check the
length of the bolts and screws.

NOTICE: The length of all bolts and screws except those with flat hea ds is

measured from below the head to the end of the bolt or screw.
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.

67 Lock Washer (M6) 1