Stamina 55-1539, Therapy Inversion System Owner's Manual

2040 N. Alliance, Springfield, MO 65803

Customer Service Number

1 [phone]

www.staminaproducts.com

This Product is Produced Exclusively by

55-1539

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

Owner's Manual

CAUTION: 1. Weight on this product should not exceed 300 lbs.

2. Class H equipment: This equipment is for home
use only. It is not for commercial use.

! WARNING !

Exercise can present a he alth
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.

When calling for parts or
service, please specify the
following number.

2007, 07

2007 Stamina Products, Inc.

TABLE OF CONTENTS

Page Page
Safety Instructions 2
Before Y ou Begin 4
Hardware Identification Chart 5
Assembly Instructions 6
Operational Instructions 10
Maintenance Instructions 12

Warranty 13
Product Parts Drawing 14
Parts List 15
Notes 17
Fax/Mail Ordering Form 18

SAFETY INSTRUCTIONS

Extreme obesity
Glaucoma, retinal detachment or conjunctivitis
Pregnancy
Spinal injury, Cerebral Sclerosis, or acutely swollen joints
Middle ear infection
High blood pressure, Hypertension, Recent stroke or Transient ischemic attack
Heart or circulatory disorders for which you are being treated
Hiatus hernia or Ventral hernia
Bone weaknesses including Osteoporosis, Unhealed fractures, Medullary pins, or
Surgically implanted orthopedic supports.
Use of anti-coagulants including Aspirin in high doses.

WARNING:

Before using this equipment you should consult with your personal physician to see if inversion

equipment is a ppropriate f or you. Do not use this equipment without your physicia n's approval. Do not
use this equipment if you have any of the following conditions or ailments:

2

WARNING:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

Do not use the Therapy Inversion System alone. Always have a helper available in case assistance is
needed in recovering from the decline position.
Make sure that the Therapy Inversion System is properly assembled before use. Pay close attention to Ste p
13 on page 9.
Make sure that the Pad T ubes a s a sse mbled with the ends pointed down a s directed in STEP 6 on page 7. The
ends must be pointed downward to properly secure the users feet in place during inversion. Improper a ssembly
will allow the users feet to come loose allowing the user to fall from the inversion table.
Do not use the Therapy Inversion System until you have verified your height setting. Failure to use the
proper height setting can result in dif ficulty recovering from the decline position. See HEIGHT ADJUSTMENT
instructions on page 10.
Always make sure that Heel Holder mecha nism is properly locked when using the Therapy Inversion Syste m.
Adjust the Nylon Straps to an angle of 15 to 20 degrees and use this setting until you have verif ied your height
setting and become familiar with the Therapy Inversion System.
You must understand how to recover from the fully inverted position before using the fully inverted position.
Read the RECOVER Y FROM LOCKED POSITION se ction at the bottom of page 12 BEFORE using the fully
inverted position.
Do not allow children to use or play on the Therapy Inversion System.
Keep small children and pets away from the Therapy Inversion System at all times.
The Therapy Inversion System should not be used by persons weighing more than 300 lbs.
The Therapy Inversion System should not be used by persons over 6 feet 6 inches tall.
Use the Therapy Inversion System only on a level surface.
W ear a ppropriate clothing when exercising; do not wear loose clothing that could become caught in the Therapy

Inversion System.

Be sure that there is enough room for the bed to rotate completely.
Use the Therapy Inversion System only as described in the manual.
The safety level of the Therapy Inversion System can be maintained only if it is examined regularly for
damage and wear.
This equipment is for home use only. It is not for commercial use.

To reduce the risk of serious injury, read the following safety instructions before
using the

Therapy Inversion System.

THANK YOU FOR PURCHASING THE

Therapy Inversion System

To help you get started, we have pre-a ssembled most of your

Therapy Inversion System at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

Within a few minutes you will be getting your body into shape a nd on your

way to achieving a happier and healthier lifestyle.

CALL US FIRST

3

Should you have any que stions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Thursday, 7:30 A.M. - 5:00 P.M. Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

BEFORE YOU BEGIN

Thank you for choosing the Therapy Inversion

System. We take great pride in producing this

quality product and hope it will provide many hours
of quality exercise to make you feel better , look better
and enjoy life to its fullest.
Yes, it's a proven fact that a regular exercise
program can improve your physical and mental
health. Too often, our busy lifestyles limit our time
and opportunity to exercise. The

Therapy

Inversion System provides a convenient and

simple method to begin your assault on getting your
body in sha pe a nd a chieving a happier and healthier
lifestyle.
Before reading further , ple ase review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the

Thera py Inversion System.

4

Footrest

Right Pivot Arm

Lever

Height

Adjustment Beam

Foam Pad

Right Protective

Cover

Round Stand

Buckle Strap
Bumper
Heel Holder

Nylon Bed

Handrail

Rear Frame

Locking Knob

Handrail

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Wrench

Combination Wrench

Front Frame

Although Stamina manufactures its products with
the finest materials and uses the highest standards
of manufacturing, occasionally a part that does not
fit, is the incorrect size, or is otherwise inappropriate
is found. Even with the highest inspection a nd quality
controls in place, these things will happen
occasionally. Please do not return the product.
Contact us FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to a ssist you from 7:30 A.M.
to 5:00 P .M. (Central T ime) Monday through Thursday
and 8:00 A.M. to 3:00 P.M. (Central T ime) on Friday.
If you would like to contact us on-line, go to our
website at www .stamin aproducts.com a nd a ccess the
Customer Service section.
Be sure to have the name and model number of
the product available when you contact us.

5

Part No. and Description Qty

43 Bolt, Hex Head (M6 x 1 x 42mm) 1
44 Bolt, Hex Head (M6 x 1 x 47mm) 1

45 Bolt, Hex Head (M8 x 1.25 x 15mm) 2
46 Bolt, Hex Head (M8 x 1.25 x 25mm) 2

48 Nylock Nut (M6 x 1) 2
49 Nylock Nut (M8 x 1.25) 4

50 Washer (M6) 4
51 Washer (M8) 6
52 Large Washer (M8) 2
53 Large Washer (M6) 2

54 Bolt, Round Head (M6 x 1 x 10mm) 2

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
end of the bolts, or screws on the circles to check for the corre ct diameter. Use the small scale to check the
length of the bolts and screws.

NOTICE: The length of all bolts and screws except those with flat hea ds is

measured from below the head to the end of the bolt or screw.
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materi als from your area a nd pla ce them ba ck into the box. Do not dispose of the pa cking materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 [phone] or e-mail us at: [e-mail]

6

The bracket needs to

point toward the footrest.

The bracket

needs to

point

toward

the footrest.

STEP 1

Unf old the BASE ASSEMBL Y to an upright position by moving the FRONT FRAME(1) away from REAR

FRAME(2). Then push down on the middle of the two FOLDING LINKAGES(3) until they are fully

locked down.

STEP 2

There is a "L" decal on the LEFT PIVOT ARM(5), and a "R" decal on the RIGHT PIVOT ARM(6).
Slide the bottom of the LEFT and RIGHT PIVOT ARMS(5, 6) into the bra ckets located at ea ch side of the

MAIN FRAME(4). Align the hole on the arm with the peg on the bracket, and insert the peg into the hole

to lock the

PIVOT ARMS(5, 6) in position. Then secure the PIVOT ARMS(5, 6) on the pegs with

ROUND HEAD BOLTS(M6 x 10mm)(54) and LARGE WASHERS(M6)(53).
STEP 3

Attach the MAIN FRAME(4) onto the REAR FRAME(2) by sliding the slots in the ends of the PIVOT

ARMS(5, 6) into the slots on the REAR FRAME(2). Secure the PIVOT ARMS(5, 6) in the slots by

screwing the

BOLTS(M8 x 15mm)(45), WASHERS(M8)(51), LARGE WASHERS(M8)(52), and

NYLOCK NUTS(M8)(49) onto the brackets on the REAR FRAME(2).

R

L