Stamina 55-1529B, Assisted Inversion Pro Owner's Manual

When calling for parts or

service, please specify

the following number

:

Model#: 55-1529B

WARNING: The Buckle Strap and the Nylon Strap must be

attached and properly adjusted at all times during
use of this product.

This Product is Distributed Exclusively by

2040 N. Alliance, Springeld, MO 65803

Customer Service

1 [phone]

www.staminaproducts.com

Product May Vary Slightly From Pictured.

STAMINA PRODUCTS

MADE IN CHINA

©

2011 Stamina Products, Inc.

2011, 03

Exerci s e ca n pr e s ent a
h e a l t h r i s k . C o n s u l t a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
discontinue use o f th i s
equipment. Serious bodily
in j u r y c a n o ccur if thi s
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all instructions are no t
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.

CAUTION: Weight on this product should not exceed 250 lbs.

Owner's

Manual

TABLE OF CONTENTS

Safety Instructions ...................................... 2

Before You Begin ........................................ 4

Equipment Warning, Caution & Notice Labels ... 5

Hardware Identication Chart .................... 6

Assembly Instructions ................................ 7

Operational Instructions ........................... 11

Storage ....................................................... 14

Maintenance ............................................... 14

Warranty ..................................................... 15

Product Parts Drawing .............................. 16

Parts List .................................................... 17

Fax/Mail Ordering Form ............................ 19

SAFETY INSTRUCTIONS

2

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

Read all warnings and cautions posted on the

Assisted Inversion Pro

.

The

Assisted Inversion Pro

should only be used after a thorough review of the Owner’s Manual.

Do not use the

Assisted Inversion Pro

alone. Always have a helper available in case assistance is needed in recovering

from the inverted position.

Verify that adequate head clearance is available between the user’s head and the oor before using this inversion table.

This is especially important for tall users.
We recommend that two people be available for assembly of this product.
Make sure that the

Assisted Inversion Pro

is properly assembled before use. Pay close attention to Step 13 on page 10.
Make sure that the Pad Tubes as assembled with the ends pointed down as directed in Step 6 on page 8. The ends must
be pointed downward to properly secure the users feet in place during inversion. Improper assembly will allow the users
feet to come loose allowing the user to fall from the inversion table.
Always make sure that Heel Holder mechanism is properly locked when using the

Assisted Inversion Pro

.

Adjust the Nylon Straps to limit the Main Frame rotation to an angle of 15 to 20 degrees from the top position and use this

setting until you have veried your height setting and become familiar with the

Assisted Inversion Pro

.

DO NOT ALLOW table to invert past vertical. Table inverting past vertical may result in table contacting frame, damage
to table and serious injury to user due to fall hazard. Prior to each use, make sure nylon and buckle straps are securely
attached, as instructed in Steps 8 and 9 on page 9. Adjust straps to desired angle of inversion, making sure that Main
Frame does not strike Front Frame at any time during use, as shown in illustrations on page 12.
Do not allow children to use or play on the

Assisted Inversion Pro

.

Keep small children and pets away from the

Assisted Inversion Pro

at all times.

The

Assisted Inversion Pro

should not be used by persons weighing more than 250 lbs.

The

Assisted Inversion Pro

should not be used by persons over 6 feet 6 inches tall.
It is recommended that you place this exercise equipment on an equipment mat.
Use the

Assisted Inversion Pro

only on a level surface.

Wear appropriate clothing when exercising; do not wear loose clothing that could become caught in the

Assisted

Inversion Pro

.

Be sure that there is enough room for the bed to rotate completely.
Use the

Assisted Inversion Pro

only as described in the manual.

The safety level of the

Assisted Inversion Pro

can be maintained only if it is examined regularly for damage and wear.

This equipment is for home use only. It is not for commercial use.

Extreme obesity
Glaucoma, retinal detachment or conjunctivitis
Pregnancy
Spinal injury, Cerebral Sclerosis, or acutely swollen joints
Middle ear infection
High blood pressure, hypertension, recent stroke or transient ischemic attack
Heart or circulatory disorders for which you are being treated
Hiatus hernia or ventral hernia
Bone weaknesses including osteoporosis, unhealed fractures, medullary pins, or surgically
implanted orthopedic supports.

Use of anti-coagulants including aspirin in high doses.

!

WARNING

This product contains a chemical known to the State of California to cause cancer and
birth defects or other reproductive harm.
To reduce the risk of serious injury, read the following Safety Instructions before using
the Assisted Inversion Pro.

!

WARNING

!

WARNING

C onsult y our ph ysician before starting this o r any exercise program. This is

especially important if you are over the age of 35, have never exercised before, are pregnant, or suffer

from any health problem. This product is for home use only. Do not use in institutional or commercial
applications. Failure to follow all warnings and instructions could result in serious injury or death. Do
not use this equipment if you have any of the following conditions or ailments:

3

Call Us First

www.staminaproducts.com

1 [phone]

Customer Service

THANK YOU FOR PURCHASING THE

Assisted Inversion Pro

To help you get started, we have pre-assembled most of your

Assisted Inversion Pro at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

With regular workouts, you will be getting your body into shape

and be on your way to achieving a happier and healthier lifestyle.

Should you have any questions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

TELEPHONE

CUSTOMER SERVICE

Tel: [phone]

FAX

CUSTOMER SERVICE

Fax: [phone]

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springeld, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

[e-mail]

www.staminaproducts.com

To enact your warranty, please register your product

by going to register.staminaproducts.com

BEFORE YOU BEGIN

4

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY :

Wrench

Combination Wrench

Thank you for choosing the Assisted Inversion

Pro. We take great pride in producing this quality

product and hope it will provide many hours of
qu ality ex ercise to make you fe el be tter, look
better, and enjoy life to its fullest.

It's a proven fact that a regular exercise program
can improve your physical and mental health.
Too often, our busy lifestyles limit our time and
opportunity to exercise. The Assisted Inversion
Pro provides a convenient and simple method to
begin your assault on getting your body in shape
and achieving a happier and healthier lifestyle.

Befo r e read i ng fur t her, plea s e revie w the
drawing below and familiarize yourself with the
parts that are labeled.

Read this manual carefully before using the

Assisted Inversion Pro.

Although Stamina constructs its products with

the nest materials and uses the highest standards

of manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
the parts included with your Assisted Inversion
Pro, please do not return the product. Contact us
FIRST!

If a part is missing or defective, please go to
staminaproducts.com to the Services section and
order the part needed, or call us toll free at 1-800­375-7520 (in the U.S.). Our Customer Service Staff
is available to assist you from 7:30 A.M. to 5:00 P.M.
(Central Time) Monday through Thursday and 8:00
A.M. to 3:00 P.M. (Central Time) on Friday.

Be sure to have the name and model number of
the product available when you contact us.

Footrest

Right Pivot Arm

Front Frame

Foam Pad

Right Protective

Cover

Round Stand

Buckle Strap

Heel Holder

Nylon Bed

Handrail

Rear Frame

Locking Knob

Handrail

Main Frame

Inversion

Warning Decal

Height Adjustment Beam

Warning Label

This chart is provided to help identify the warning, caution, and notice labels on the Assisted
Inversion Pro. Please take a moment to familiarize yourself with all of the warning, caution, and

notice labels.

EQUIPMENT WARNING, CAUTION & NOTICE LABELS

5

WARNING LABEL(57)W1

5

Labels are larger than actual size

WARNING DECAL(61)W2

INVERSION WARNING DECAL(62)W3

6

length

length

mm.

in.

INCHES

This chart is provided to help identify the hardware used in the assembly process. Place the washers or
the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to
check the length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat

heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.

After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.

MILLIMETERS

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

0 1/2 1 1/2 2 1/2 3 1/2 4 1/2 5 1/2 6

6 8 10 12

3/16" 1/4" 5/16" 3/8" 1/2"

HARDWARE IDENTIFICATION CHART

Part No. and Description Qty

43 Bolt, Hex Head (M6 x 1 x 42mm) 1
44 Bolt, Hex Head (M6 x 1 x 47mm) 1

45 Bolt, Hex Head (M8 x 1.25 x 15mm) 2
46 Bolt, Hex Head (M8 x 1.25 x 25mm) 2

47 Bolt, Hex Head (M8 x 1.25 x 50mm) 2

48 Nylock Nut (M6 x 1) 2
49 Nylock Nut (M8 x 1.25) 6

50 Washer (M6) 4
51 Washer (M8) 10
52 Large Washer (M8) 2
53 Large Washer (M6) 2

54 Bolt, Round Head (M6 x 1 x 10mm) 2