Stamina 5125u, 15-5125 Owner's Manual

15-5125

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

2004, 04

Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.

When calling for parts or
service, please specify the
following number.

WA RNING

CAUTION:
Weight on this product should not exceed 250 lbs.

2040 N. Alliance, Springfield, MO 65803

Customer Service Number

1 [phone]

www.staminaproducts.com

This Product is Produced Exclusively by

2004 Stamina Products, Inc.

Owner's
Manual

TABLE OF CONTENTS

Maintenance 15
Conditioning Guidelines 16
Warm-up and Cool-Down 17
Product Parts Drawing 18
Parts List 19
Warranty 21
Notes 22
Fax/Mail Ordering Form 23

Page Page

Safety Instruction s 2
Before You Begin 4
Hardware Illustrations 5
Assembly Instructions 6
Set Up Instruction s 10
Operational Instructions 11
Computer Instruction s 12
Storage 15

WARNING: Before starting any exercise or conditioning program you should consult with your personal

physicia n to see if you require a complete physical exa m. This is e specially i mporta nt if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESUL T IN SERIOUS BODILY INJURY.

SAFETY INSTRUCTIONS

WARNING:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

Read all warnings posted on the 5125u Magnetic Bike.
The 5125u Magnetic Bike should only be used after a thorough review of the Owner's Manual.
Keep children away from the 5125u Magnetic Bike. Do not allow children to use or play on the
5125u Magnetic Bike. Keep children and pets away from the 5125u M agnetic Bike when it is in use.
The 5125u M agnetic Bike is a Class A Non-free-wheeling exercise bicycle with a directly driven flywheel.
Spinning pedals can cause injury.
The 5125u Magnetic Bike does not free wheel.
Pedal speed should be reduced in a controlled manner.
Make sure that the The 5125u Magnetic Bike is properly assembled and tightened before use.
Set up and operate the 5125u Magnetic Bike on a solid level surface. Do not position the 5125u
Magnetic Bike on loose rugs or uneven surfa ces.
Adjust the LEVELING CAPS on the REAR ST ABILIZER so that the bike sets on the floor without rocking.
Inspect the 5125u Magnetic Bike for worn or loose components prior to use. Tighten/replace any
loose or worn components prior to using.
Always check to see that the Seat Post is securely fa stened bef ore using the 5125u Magnetic Bike.
The Adjustment Knob must be inserted into one of the holes in the Seat Post.
Consult a physician prior to commencing an exercise program. If, at any time during exercise, you
feel faint, dizzy, or experience pain, stop and consult your physician.
Follow your physician's recommendations in developing your own personal fitness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your
limits and train within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the 5125u Magnetic Bike.
Never exercise in bare feet or socks; always wear correct footwear, such as running, walking, or
crosstraining shoes. Be sure that they fit well, provide foot support a nd feature non-s kid rubber soles.
Care should be taken in mounting or dismounting the 5125u Magnetic Bike.
The 5125u Magnetic Bike should not be used by persons weighing over 250 pounds.
The 5125u Magnetic Bike should be used by only one person at a time.
Do not ride the 5125u Magnetic Bike standing up.
The 5125u M agnetic Bike is for consumer use only . It is not f or use in public or semipublic fa cilities.

2

To reduce the risk of serious injury, read the following Safety Instructions before
using th

e 5125u Magnetic Bike.

CALL US FIRSTCALL US FIRST

CALL US FIRSTCALL US FIRST

CALL US FIRST

THANK YOU FOR PURCHASING THE

5125u Magnetic Bike

To help you get started, we have pre-assembled most of your

5125u Magnetic Bike at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

Within a few minutes you will be getting your body into shape and on your

way to achieving a happier and healthier lifestyle.

Should you have any que stions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Friday, 8:00 A.M. - 5:00 P.M., Central Time.

3

BEFORE YOU BEGIN

Although Stamina tries to manufa cture its products
with the finest materials and uses the highest
standards of ma nufacturing, occasionally a part that
does not fit, is the incorrect size, or is otherwise
inappropriate is found. Even with the highest
inspection and quality controls in place these things
will happen occasionally. Please do not return the
product. For your convenience, Stamina has a
Customer Service Department with a toll-free
number. If a part is missing, does not fit, is the
incorrect size, or is otherwise inappropriate, please
call 1 [phone] (in the U.S.) between 8:00 A.M.
and 5:00 P.M. Central Ti me, Monday through Friday .
Our operators will be able to assist you with your
problem and the parts will be mailed directly to your
house.

Thank you for choosing the

5125u Magnetic

Bike. We take great pride in producing this quality

product and hope it will provide ma ny hours of quality
exercise to make you feel better , look better and enjoy
life to its fullest.
Yes, it's a proven fact that a regular exercise
program can improve your physical and mental
health. Too often, our busy lifestyles limit our time
and opportunity to exercise. The

5125u Magnetic

Bike provides a convenient and simple method to

begin your a ssault on getting your body in sha pe and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this ma nual carefully before using the

5125u

Magnetic Bike.

4

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Wrench

Allen Wrench (6mm)

Computer

Handlebar

Pulse Sensor Plate

Upright

Right Pedal

Crank

Endcap

Front Stabilizer

Right Cover

Pulse Sensor Plate

Rear Stabilizer

Levelling Cap

Left Cover

Adjustment Knob

Bellows

Seat

Main Fra me

Tension Knob

Warning label

Length

47 Carriage Bolt (M8 x 1.25 x 65mm) 4

49 Bolt, Button Head (M8 x 1.25 x 20mm) 7

5

63 Lock Washer (M8) 11

56 Nylock Nut (M8 x 1.25) 3

59 Acorn Nut (M8 x 1.25) 4

64 Washer (M8) 3

Part No. and Description Qty

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

HARDWARE IDENTIFICATION CHART

Place washers, the end of bolts or screws on the
circles to check for the correct size. Use the small
scale to check the sizes of bolts and screws.

This chart is provided to help identify the hardware used in the a ssembly process. After unpacking the unit,
open the hardware bag and make sure that you have the following items:

62 Arc Washer (M8) 11

NOTE: Nylock Nut(M8 x 1.25)(56) and Washer(M8)(64) may attached under the Seat by the fa ctory.

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materi als from your area a nd pla ce them ba ck into the box. Do not dispose of the pa cking materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 [phone] or e-mail us at:

[e-mail]

6

STEP 1

Attach the FRONT STABILIZER(2), the short one with the round ENDCAPS(44), onto the front of the

MAIN FRAME(1) with CARRIAGE BOLTS(M8 x 65mm)(47), ARC WASHERS(M8)(62), LOCK
WASHERS(M8)(63), and ACORN NUTS(M8)(59).

STEP 2

Attach the REAR ST ABILIZER(3), the one with the LEVELING CAPS(45), onto the MAIN FRAME(1)
with CARRIAGE BOL TS(M8 x 65mm)(47), ARC W ASHERS(M8)(62), LOCK W ASHERS(M8)(63),
and ACOR N NUTS(M8)(59).

NOTE:

You can adjust the LEVELING CAPS(45) on the REAR STABILIZER(3) to keep the Bike
stable.

ASSEMBLY INSTRUCTIONS

7

STEP 3
NOTE:

The RIGHT PEDAL(35) ha s R sta mped on the end of the pedal shaft. The RIGHT PEDAL(35)
has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(34) has L
stamped on the end of the pedal shaft. The LEFT PEDAL(34) has left hand threads and is
tightened by turning counter clockwise.

STEP 4

Attach the SEAT(43) onto the SEA T POST(6) with NYLOCK NUTS(M8)(56) and WASHERS(M8)(64).

STEP 5

Slide BELLOWS(40) over the SEAT POST(6). Insert the SEAT POST(6) into the MAIN FRAME(1)
and secure with the ADJUSTMENT KNOB(42).

NOTE:

The ADJUSTMENT KNOB(42) should be screwed in tight to make the SEAT POST(6) fit
securely in the

MAIN FRAME(1).

Thread the RIGHT PEDAL(35) onto the right side of the CRANK(7) a s shown. Tighten the pedal securely .
Do the same to attach the

LEFT PEDAL(34) onto the left side of the CRANK(7).