Stamina 1300, 15-1300 Owner's Manual

Model#: 15-1300

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

2008, 07

Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.

When calling for parts or
service, please specify the
following number.

WA RNING

CAUTION:
Weight on this product should not exceed 250 lbs.

2008 Stamina Products, Inc.

Owner's

Ma nual

2040 N. Alliance, Springfield, MO 65803

Customer Service

1 [phone]

www.staminaproducts.com

This Product is Produced Exclusively by

TABLE OF CONTENTS

Maintenance 14
Conditioning Guidelines 15
Warm-Up a nd Cool-Down 16
Warranty 17
Product Parts Drawing 18
Parts List 19
Notes 21
Fax/Mail Ordering Form 22

Page Page

Safety Instructions 2
Before Y ou Begin 4
Equipment Warning & Notice Labels 5
Hardware Identification Chart 6
Assembly Instructions 7
Set Up Instructions 11
Operational Instructions 12
Storage 14

WARNING: Before starting any exercise or conditioning program you should consult with your personal

physicia n to see if you require a complete physical exa m. This is e specially i mporta nt if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESUL T IN SERIOUS BODILY INJURY.

SAFETY INSTRUCTIONS

2

WARNING:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

Read all warnings posted on the Magnetic Upright 1300 Bike.
The Magnetic Upright 1300 Bike should only be used after a thorough review of the Owner's Manual.
We recommend that two people be available for assembly of this product.
Keep children away from the Magnetic Upright 1300 Bike. Do not allow children to use or play on the
Magnetic Upright 1300 Bike. Keep children a nd pets away from the Magnetic Upright 1300 Bike when it is
in use.
The Magnetic Upright 1300 Bike is not a freewheeling exercise bike; therefore, pedal speed should be
reduced in a controlled manner to prevent injury from spinning pedals.
Make sure the M agnetic Upright 1300 Bike is properly assembled and that all nuts and bolts are tightened
before use.
It is recommended that you place this exercise equipment on an equipment mat.
Set up and operate the Magnetic Upright 1300 Bike on a solid level surface. Do not position the Magnetic
Upright 1300 Bike on loose rugs or uneven surfaces.
Make sure that adequate space is available for access to and around the Magnetic Upright 1300 Bike.
Adjust the LEVELING CAPS on the REAR STABILIZER so that the bike sits on the floor without rocking.
Before using, inspect the M agnetic Upright 1300 Bike for worn or loose components, and tighten or repla ce
any loose or worn components prior to use.
Before using, always check the seat post to be sure it is secure. The a djustment knob must be inserted into
one of the holes in the seat post and tightened.
Consult a physician prior to commencing an exercise program and follow his/her recommendations in
developing your fitness program. If at any time during exercise you feel faint, dizzy, or experience pain, stop
and consult your physician.
Follow your physician's recommendations in developing your own personal fitness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your limits and
train within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the Magnetic Upright 1300 Bike.
Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or cross
training shoes that fit well, provide foot support, and feature non-skid rubber soles.
Care should be taken in mounting or dismounting the Magnetic Upright 1300 Bike.
The Magnetic Upright 1300 Bike should not be used by persons weighing over 250 pounds.
The Magnetic Upright 1300 Bike should be used by only one person at a time.
Do not ride the Magnetic Upright 1300 Bike while standing up.
The Magnetic Upright 1300 Bike is for consumer use only. It is not for use in public or semipublic facilities.

To reduce the risk of serious injury, read the following Safety Instructions before
using the Magnetic Upright 1300 Bike.

3

THANK YOU FOR PURCHASING THE

1300 Magnetic Upright Exercise Bike

To help you get started, we have pre-assembled most of your

Magnetic Upright 1300 Bike at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

With regular workouts, you will be getting your body into shape

and be on your way to achieving a happier and healthier lifestyle.

Should you have any que stions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

CALL US FIRST

Customer Service

1(800) 375-7520

www.staminaproducts.com

TELEPHONE

CUSTOMER SERVICE

Tel: [phone]

FAX

CUSTOMER SERVICE

Fax: [phone]

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springfield, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

[e-mail]

www.staminaproducts.com

BEFORE YOU BEGIN

4

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Wrench

Allen Wrench (6mm)

Meter

Handlebar

Upright

Right Pedal

Crank

Endcap

Front Stabilizer

Right Cover

Rear Stabilizer

Leveling Cap

Left Cover

Seat

Main Fra me

Tension Knob

Warning Label

Seat Post

Adjustment Knob

Thank you f or choosing the Magnetic Upright 1300
Bike. We take great pride in producing this quality

product and hope it will provide ma ny hours of quality
exercise to make you feel better, look better, and
enjoy life to its fullest.
It's a proven fact that a regular exercise program
can improve your physical and mental health. Too
often, our busy lifestyles limit our ti me and opportunity
to exercise. The Magnetic Upright 1300 Bike
provides a convenient and simple method to begin
your assault on getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and fa mili arize yoursel f with the parts that are
labeled.
Read this manual carefully before using the

Magnetic Upright 1300 Bike.

Although Stamina constructs its products with the
finest materials and uses the highest standards of
manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
the parts included with your Magnetic Upright 1300
Bike, please do not return the product. Contact us
FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to a ssist you from 7:30 A.M.
to 5:00 P .M. (Central T ime) Monday through Thursday
and 8:00 A.M. to 3:00 P.M. (Central T i me) on Friday.
If you would like to contact us online, go to our
website at www.sta mina products.com a nd a ccess the
Customer Service section.
Be sure to have the na me and model number of the
product available when you contact us.

5

EQUIPMENT WARNING & NOTICE LABELS

Label is larger tha n actual size

WAR NING LABEL(59)

W1

This chart is provided to help identify the warning & notice labels on the Magnetic Upright 1300 Bike.
Please take a moment to familiarize yourself with all of the warning & notice labels.

6

Part No. and Description Qty

40 Carriage Bolt (M8 x 1.25 x 65mm) 4

41 Bolt, Button Head (M8 x 1.25 x 15mm) 4

56 Lock Washer (M8) 8

52 Acorn Nut (M8 x 1.25) 4

58 Washer (M8) 3

55 Arc Washer (M8) 8

48 Screw, Round He ad (M5 x 0.8 x 15mm) 4
49 Screw, Round He ad (M6 x 1 x 8mm) 2

42 Bolt, Button Head (M8 x 1.25 x 30mm) 1

50 Nylock Nut (M8 x 1.25) 3

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the a ssembly process. Pla ce the washers or the
ends of the bolts or screws on the circles to check for the correct di ameter. Use the small scale to check the
length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat heads,

is mea sured from below the hea d to the end of the bolt or screw .
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.

ASSEMBLY INSTRUCTIONS

7

STEP 1

Attach the FRONT STABILIZER(2) to the front of the MAIN FRAME(1) with CARRIAGE BOLTS
(M8x1.25x65mm)(40), ARC WASHERS(M8)(55), LOCK WASHERS(M8)(56), a nd ACORN NUTS(M8x1.25)
(52).

STEP 2

Attach the REAR STABILIZER(3) to the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x65mm)(40),
ARC WASHERS(M8)(55), LOCK W ASHERS(M8)(56), a nd ACOR N NUTS(M8x1.25)(52).
NOTE: You can adjust the LEVELING CAPS(38) on the REAR STABILIZER(3) to keep the Bike stable.

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materi als from your area a nd pla ce the m ba ck into the box. Do not dispose of the pa cking materi als
until a ssembly is completed. Read e a ch step carefully before beginning. If you are missing a part please call
our toll-free number for a ssistance 1-800-375-7520 or e-mail us at: customerservice@sta min aproducts.com