ST STM3240G-SK-IAR User Manual

STM3240G-SK/IAR

IAR™ starter kit for STM32F4 series 32-bit microcontrollers

Data brief

Features

■ The IAR Embedded WorkBench

(EWARM) software package with:
– KickStart™ C/C++ compiler for output of

code up to 32 Kbytes

– VisualSTATE

®

code generator, 20-state

version

–C-SPY

®

high-level language debugger

– Editor, linker and librarian tools

■ Embedded J-Link in-circuit debugger/

programmer with USB interface to host PC and
20-pin JTAG application interface

■ Full-featured KickStart development board with

target microcontroller

®

for ARM

Description

The IAR KickStart Kit™ is a complete, cost­effective solution for starting application
development and evaluating the
STMicroelectronics STM32F4-series ARM core­based microcontrollers.

Figure 1. Evaluation board

Figure 2. Starter kit

This IAR KickStart Kit contains all the necessary
hardware and software and allows you to design,
start to develop, integrate and test your
applications, right out of the box:

■ Evaluation board with STM32F407ZG MCU

■ IAR Embedded Workbench for ARM 32K

limited edition

■ IAR visualSTATE 20-state evaluation edition

■ Embedded IAR J-Link Lite debug probe for

STMicroelectronics Cortex-M devices

■ Example applications made for the

STM32F407ZG board

■ RTOS board support from IAR Systems RTOS

partners

IAR KickStart kits are available for a full range of
ST ARM core-based microcontrollers.

November 2011 Doc ID 022487 Rev 1 1/3

For further information contact your local STMicroelectronics sales office.

www.st.com

3

Ordering information STM3240G-SK/IAR

STM32F407ZG evaluation board features

● STM32F407ZG MCU

● Four indicator LEDs

● Joystick

● Audio (headphone jack)

● Separate camera connector

● User and WakeUp buttons

● Small color LCD

● 20-pin 0.1'' JTAG/SWD connector

● Small 20-pin 0.05” trace tool connector

● Two USB connectors (full speed only)

– OTG (On-The-Go)
–Host

● Two USART - DB9 connectors

● CAN - DB9 connector

● Ethernet

● UEXT (Universal expansion connector)

● SD/MMC card slot

● Multiple power supply options:

–J-Link
–USB OTG
–CAN
– External supply
– Trace connector

● Power supply LED

● Reset button and circuit

● Temperature sensor

● 3-axis accelerometer

● Prototyping area

● Tamper button

● External RAM memory headers

Ordering information

IAR KickStart kits can be ordered from IAR or from your nearest ST distributor or sales
office (ST order code: STM3240G-SK/IAR).

For more information and complete documentation, please refer to the IAR web site or the
STMicroelectronics microcontroller support site on www.st.com.

Revision history

2/3 Doc ID 022487 Rev 1

Table 1. Document revision history

Date Revision Changes

24-Nov-2011 1 Initial release.