ST7-EPB series programming boards
Features
■ In-circuit programming or in-situ programming
of various ST7 devices (depending on the EPB
and the ST7 it supports)
■ Supports executables in Motorola S19 and
Intel formats
■ Voltage: 5 V
■ The EPB programming boards are delivered in
a complete package that includes:
– Programming sockets for all packages in
the supported ST7 sub-family
–Power supply
– Parallel port interface to the host PC
– STVP software for in-circuit programming
ST7-EPB
Data brief
Description
STMicroelectronic's ST7-EPB series
programming boards can program all ST7
microcontrollers with OTP, EPROM, EEPROM or
Flash memories, regardless of the package type.
Some programming boards support in-situ
programming or in-circuit programming of ST7
Flash microcontrollers installed on an application
board.
All ST7-EPB series programming boards are
delivered with ST Visual Programmer (STVP),
ST's powerful, easy-to-use microcontroller
programming interface which allows you to read,
write and verify ST7 memory and option bytes.
STVP also provides a project mode for storing
programming configurations and automating
programming sequences.
Table 1. Device summary
Part number Order code
– ST7MDTS1-EPB/xx for
ST7SCR1x devices
ST7-EPB
1. Not recommended for new design
– ST7MDTU3-EPB/xx for
ST7260x/263x devices
– ST7MDTU5-EPB/xx for
ST7265x devices
(1)
November 2010 Doc ID 18051 Rev 1 1/3
For further information contact your local STMicroelectronics sales office.
www.st.com
3
Revision history
Table 2. Document revision history
Date Revision Changes
05-Nov-2010 1 Initial release.
ST7-EPB
2/3 Doc ID 18051 Rev 1
ST7-EPB
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 18051 Rev 1 3/3
Loading...