TS2 / TS6 SeriesTimer - Interval
Connection:
L1 N/L2
The TS2 Series is designed for 24, 120 or 230VAC
and the TS6 Series is designed for 12 or 24VDC.
These series are capable of controlling load
currents of up to 1A steady state, 10A inrush.
Encapsulated circuitry and the reliability of a ±2%
repeat accuracy make the TS2 and TS6 ideal for
cost sensitive applications.
Operation (Interval):
Upon application of input voltage, the time delay begins.
The output energizes during the time delay. At the end
of the time delay, the output de-energizes and remains
de-energized until input voltage is removed.
Reset: Removing input voltage resets the time delay and
the output.
For more information see:
Appendix A, pages 156-164 for function descriptions
and diagrams.
Appendix B, page 165, Figure 1 for dimensional drawing.
Features:
• 12 or 24VDC; 24,120, or 230VAC input
voltages
• Fixed or adjustable delays from 0.05s - 10m
in 8 ranges
• Repeat accuracy ±2%
• Load currents to 1A, 10A inrush
• Totally solid state & encapsulated
Approvals:
Auxiliary Products:
• External adjust potentiometer:
P / N: P1 00 4- XX
P/N: P1004-XX-X
• Female quick connect:
P /N : P 1 01 5 - 6 4 ( AW G 1 4 / 1 6)
• Quick connect to screw adaptor:
P/N: P1015-18
• Mounting bracket: P/N: P1023-6
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
• Versa-knob: P/N: P0700-7
• Plug-on adjustment module:
P/N: VTP(X)(X)
TS6 12VDC
Time Delay VTP P/N
1 - 0.05-1s
2 - 0.5-20s
3 - 2-60s
4 - 5-120s
VTP2A
VTP2E
VTP2F
VTP2H
RT is used when external adjustment is ordered.
Note: TS6 is not reverse polarity protected.
Order Tables:
TS2
TS6
X
Input Voltage
─2 - 24VAC
─4 - 120VAC
─6 - 230VAC
X
Input Voltage
─1 - 12VDC
─3 - 24VDC
X
Adjustment
─1 - Fixed
─2 - External adjust
X
Adjustment
─1 - Fixed
─2 - External adjust
X
Time Delay*
─1 - 0.05 - 3s
─2 - 0.5 - 60s
─3 - 2 - 180s
─4 - 5 - 600s
X
Time Delay*
12VDC 24VDC
─1 - 0.05 - 1s 0.05 - 3s
─2 - 0.5 - 20s 0.5 - 60s
─3 - 2 - 60s 2 - 180s
─4 - 5 - 120s 5 - 600s
Specications
Time Delay
Type .................................Analog circuitry
Range 12VDC ..............0.05 - 120s in 4 adjustable ranges or xed
(1 MΩ max. RT )
Other Voltages .......0.05 - 600s in 4 adjustable ranges or xed
Repeat Accuracy ......................±2% or 20ms, whichever is greater
Tolerance (Factory Calibration) ..........≤ ±10%
Time Delay vs Temp. & Voltage ..........≤ ±10%
Reset Time ............................≤ 150ms
Input
Voltage ...............................12 or 24VDC; 24, 120, or 230VAC
Tolerance .............................±15%
DC Ripple ............................10%
Power Consumption ...................DC ≤ 1W; AC ≤ 2VA
Output
Type .................................Solid state
*If xed delay is selected, insert
delay (0.05 - 600) in seconds.
X
Switching Mode
─P - Positive
*If xed delay is selected, insert delay (0.05
- 120 12VDC) or (0.05 - 600 24VDC) in secs.
Form .................................NO, closed during timing
Maximum Load Current ................1A steady state, 10A inrush at 60°C
Voltage Drop ..........................DC ≅ 1.0V @ 1A; AC ≅ 2.5V @ 1A
Protection
Circuitry .............................Encapsulated
Polarity ..............................TS6 is not reverse polarity protected
Dielectric Breakdown ..................≥ 2000V RMS terminals to mounting surface
Insulation Resistance ...................≥ 100 MΩ
Mechanical
Mounting ............................Surface mount with one #10 (M5 x 0.8) screw
Dimensions ...........................2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
Termination ...........................0.25 in. (6.35 mm) male quick connect terminals
Environmental
Operating / Storage Temperature .......-40° to 75°C / -40° to 85°C
Humidity .............................95% relative, non-condensing
Weight ...............................≅ 2.4 oz (68 g)
TS2 & TS6
All Other Voltages
Time Delay VTP P/N
1 - 0.05-3s
2 - 0.5-60s
3 - 2-180s
4 - 5-600s
Selection Table for VTP Plug-on
Adjustment Accessory.
VTP4B
VTP4F
VTP4J
VTP5N
Available Models:
TS22120
TS2213
TS2223
TS2411.5
TS24110
TS2412
TS2413
TS24130
If desired part number is not listed, please call us
to see if it is technically possible to build.
TS2421
TS2422
TS2423
TS2424
TS2611.5
TS26130
TS26190
TS2621
TS6116P
TS6122P
TS6123P
TS6311P
TS63110P
TS6321P
Loading...