8
MEMORY CARD
A memory card is required to record photos and videos. The camera is
compatible with SD/SDHC memory cards, up to 32 GB capacity (sold
separately).
When the camera is turned on and no memory card is used, the camera
beeps. In TEST mode, the screen displays "Insert Memory Card".
Here is a table of the approximate number of photos and length of videos
that can be recorded with different memory card capacities. Many photo
and video resolutions are noted, see those corresponding to the camera.
Note: This SPYPOINT camera is equiped with continuous le
recording. When the memory card is full, the camera will continue to record
photos or videos by deleting the rst recorded les.
4 GB 8 GB 16 GB 32 GB
Photo
3 MP 4100 8200 16400 32800
4 MP 3800 7600 15200 30400
5 MP 3400 6800 13600 27300
6 MP 3200 6300 12600 25300
7 MP 2700 5500 10900 21800
8 MP 2400 4800 9500 19000
10 MP 1900 3800 7600 15200
12 MP 1600 3200 6300 12600
Video
320 x 240 4 h 8 h 16 h 32 h
640 x 480 2h10 4h10 8h20 16h40
1280 x 720 40 min 1h20 2h40 5h20
INSERTING THE MEMORY CARD
Insert an SD/SDHC memory card (up to 32 GB
capacity) in the card slot, gold contacts facing up.
The card is inserted correctly when a click is heard.
Before inserting or removing a memory card,
always turn off the camera to prevent loss or
damage of the photos already recorded.
REMOVING THE MEMORY CARD
Lightly press the memory card into the camera once to pop it out of the slot
and remove it.
SIM CARD (mini-LIVE/mini-LIVE-4G)
The use of a SIM card is required to take advantage of the cellular features
of the camera.
INSERTING THE SIM CARD
Carefully insert a SIM card in the card slot, gold
contact area facing down.
Before inserting or removing a SIM card,
always turn off the camera.
REMOVING THE SIM CARD
Lightly press the SIM card into the camera once to pop it out of the slot and
remove it.
BUSY LED
The BUSY light, located below the screen, is a diagnostic tool. It lights up
when the camera starts, when the camera records a le, in TEST mode at
the same time as the test light (located in front of the camera), and during
communications with the mySPYPOINT server.
MOUNTING BRACKET
To remove the camera from the mounting bracket:
1. Push the tab to release the camera from the mounting
bracket.
2. Remove the camera.
1.
2.
Memory card/SIM card/BUSY LED/Mounting bracket
Mini