LINK-MICRO-S-LTE
QUICKSTART GUIDE
v.1.3
ENGLISH
In the box
1x LINK-MICRO-S-LTE camera
1x Antenna holder
1x Installation strap
1x Quick start guide
1x SIM card that is preactivated and inserted in the camera
1x USB Micro USB cable
1x LIT-10 lithium battery pack
MicroSD memory card is sold separately.
NOTE:
User manual, latest rmware, and FAQ available at:
SPYPOINT.COM/SUPPORT
Components
Solar panel
1
Antenna
2
Detection lens
3
MicroSD card slot
4
Light sensor
5
Delay light
6
Photo lens
7
LED
8
ON/OFF switch
9
2
"STATUS" light
10
11
SIM card slot
12
Battery compartment
13
Slot for installation strap
14
Locking latch
15
Cable lock hole
16
12V jack
17
Standard ¼"-20 tripod mount
1
2
3
4
13
14
15
5
ENGLISH
6
7
8
9
10
11
12
16
17
3
ENGLISH
Getting started
CHARGING THE LITHIUM BATTERY
• Remove the lithium battery pack from the camera.
• Using the Micro USB cable, recharge the battery pack for about 12 hours.
• Once the lithium pack is fully charged, the red light will turn green.
Do not insert AA batteries into the lithium battery
compartment, as this could damage the camera.
HOW YOUR CAMERA USES SEVERAL POWER SOURCES
1. The main power source of your camera is the lithium battery
pack (#LIT-10 included), which provides a long charge time,
more than double that of AA batteries.
• The solar panel is designed to maintain the battery
pack’s charge. The camera will be energy self-sucient
under ideal conditions (an adequate conguration, i.e.
low power consumption and a sunny environment).
• When the battery pack charge level becomes insu-
cient, the camera will turn o.
• The solar panel will continue to power the battery pack.
However, for quick and complete recharging, connect
the battery pack to a wall outlet using the supplied USB
cable and a USB power adapter.
• When you restart your camera, after recharging the battery
pack, it will return to the settings you previously selected.
2. Moreover, the camera was designed to recognize and use a
primary power source other than the lithium battery pack:
• As soon as you plug an external 12V battery (#BATT-12V,
sold separately)
era’s new primary power s ource. The lithium battery pack
will only be used once the 12V battery is depleted.
• Simply plug the 12V cable into the 12V jack of the
camera and connect the other end to the 12V battery.
4
into your camera, it becomes your cam-
Getting started
USING AN EXTERNAL 12V BATTERY
Using an external 12V battery source does not recharge the
•
lithium battery pack.
• The solar panel will not recharge an external 12V battery.
FORMATTING YOUR MicroSD CARD
Before inserting the MicroSD card into your camera, it must be
reformatted via a computer to ensure proper functionality.
Memory card is sold separately. Whether you choose to use a MicroSD card you previously used in another device or a brand new
one you've just bought, its capacity must not exceed 32 GB and it
must be reformatted. Do not use the ‘’Quick format’’ option.
INSERTING A MicroSD CARD
Ensure the camera is turned o.
•
• Insert a MicroSD memory card (up to 32 GB capacity) into
the MicroSD card slot with the label facing up.
• The card is inserted correctly when a click is heard.
LIT-10 BATTERY SPECIFICATIONS
This lithium battery is compatible with all SPYPOINT
LINK-MICRO cameras and the CELL-LINK.
Charging time ≈ 12 hours (with USB cable)
Operating temperature
Storage temperature
Voltage 3.7 Volts
Capacity 10200mAh
(
-30 °C to+50 °C) (-22 °F to+122 °F)
(-40 °C to+60 °C) (-40 °F to+140 °F)
ENGLISH
5
ENGLISH
ACTIVATING YOUR CAMERA
You must activate your camera through the free SPYPOINT
app or the SPYPOINT.COM website.
FINDING THE ACTIVATION CODE
The activation code is located inside the battery compartment.
You will need this unique code to activate the LINK-MICRO-S-LTE.
SPYPOINT APP
Follow these steps:
1. On Google Play
2. Download and install the app on your smar tphone or tablet.
3. S
tart the app. Select "ACTIVATE A DEVICE". In the list, select
"LINK-MICRO-S-LTE"
4. When complete, a conrmation email with instructions on how to
nalize the creation of your account will be sent to you.
5. Log in to the SPYPOINT app using your email and password.
6
TM
or the App StoreTM, search for "SPYPOINT app".
then follow the steps.
ACTIVATING YOUR CAMERA
SPYPOINT.COM website
Follow these steps:
1. On the SPYPOINT.COM website, select "LOGIN" in the top navigation
menu. On the displayed page, select "Register," ll out the required
elds, then log in.
2. Select the + sign on the far right of the page; in the list,
select "LINK-MICRO-S-LTE" then follow the steps.
3. When complete, a conrmation email with instructions on how
to nalize the creation of your account will be sent to you.
4. On the website, log in to your account using
your email and password.
You can activate additional cameras
and switch between them in the
NOTE:
SPYPOINT app or website.
CHOOSING A PHOTO TRANSMISSION
PLAN FOR YOUR CAMERA
Go to
https://www.spypoint.com/en/spypoint-experience/plans
to read the latest offers and choose the plan that suits you.
ENGLISH
7
ENGLISH
CONFIGURING YOUR CAMERA
Both the SPYPOINT app and website let you congure all the camera settings remotely. They also provide basic information on your camera – such
as: cellular signal strength, battery level, and MicroSD card space used. This
information is based upon the latest connection with your camera.
New settings take eect every time the camera connects with app or website.
BASIC PHOTO SETTINGS
Delay: Allows you to set the time interval between each detection
before the camera records the next photo or video.
Multishot: Allows you to set the number of photos per detection
(up to 3) with a 5-second delay between each photo.
Sensitivity: Allows you to set the detection sensitivity of the camera.
Camera name: Allows you to name each owned camera.
CELLULAR SETUP
First transfer time: Allows you to choose the time
when the camera makes its rst transfer of the day.
Transfer frequency: Allows you to choose the number of daily transfers.
ADVANCED OPTIONS/CONFIGURATION
Schedule: Allows you to set the period of operation for each
day of the week. For a 24-hour operation mode, both the start
and stop times must be 12 AM
NOTE:
hours from midnight.
8
Camera transfers are set by default to every 4
STARTING YOUR CAMERA
FIRST TIME SETUP
1. Turn on the camera.
2. The green "STATUS" light will ash while searching for a signal (can
take a few minutes).
3. The "STATUS" light will light up in one of the following 3 colors:
Red : Insucient signal.
Orange: Acceptable signal.
-
Green : Optimal signal.
-
4. When the top right light ashes red, 30 seconds remain before
-
the photo mode is turned on. This allows you to leave the area
without being photographed.
5. The camera is ready for use when all the lights turn o.
6. If the light is red during step 3, you should:
• Turn your camera o and then back on.
• Retry while pointing the antenna at dierent angles.
• Try moving it to a spot with better signal.
• Try our #CA-01 long-range cellular antenna (sold separately),
which could help improve signal strength.
INSTALLING YOUR CAMERA
1. Mount the camera using the installation strap.
2. The camera should be at the same height as the animal’s mid-body.
3. The targeted animal should be at 25 feet/7.5 meters away from the camera.
4. For brighter pictures at night, ensure you have elements in the
background to reect the IR ash.
ENGLISH
9
ENGLISH
DISPOSAL
ONLY USE ORIGINAL SPARE PARTS AND ACCESSORIES.
If one day your camera has been used so intensively that it has to be replaced, or if you
no longer have any use for it, you are obliged to dispose of it at a recycling center.
Information on return points for your electrical appliance can be obtained from your
local waste disposal company or from your local administrative offices.
Electrical appliances not only contain valuable recyclable raw materials, but also
substances which, if disposed of improperly, can affect public health and the environ
ment. Help ensure that valuable raw materials are recycled when you return your old
appliance to a central collection point.
The WEEE (Waste Electrical and Electronic Equipment Directive ) symbol represents
the obligation that the labeled camera to be sent to a separate center for the proper
recycling of electrical and electronic equipment.
FREQUENCY
FREQUENCY RANGE:
800/ 850/ 900/ 1900/ 2100MHz
MAXIMUM TRANSMISSION POWER:
FREQUENCY
GSM850
EGSM900
DCS1800
PCS1900
GSM850 (8-PSK)
EGSM900 (8-PSK)
DCS1800 (8-PSK)
PCS1900 (8-PSK)
UMTS 2100
UMTS 1900
UMTS 900
UMTS 850
UMTS 800
10
MAX.
33DBM±2DB
33DBM±2DB
30DBM±2DB
30DBM±2DB
27DBM±3DB
27DBM±3DB
26DBM±3DB
26DBM±3DB
24DBM+1.7/3.7DB
24DBM+1.7/3.7DB
24DBM+1.7/3.7DB
24DBM+1.7/3.7DB
24DBM+1.7/3.7DB
-
FCC
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions:
1. This device must not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired operation.
For a complete list of specifications, features,
and settings, visit our LINK-MICRO-S-LTE page at
www.spypoint.com.
ENGLISH
THANK YOU FOR CHOOSING
rmware available at:
Live chat support at
www.spypoint.com
FAQ, user manual & latest
SPYPOINT.COM/SUPPORT
service@spypoint.com
Join the community
Sit back and relax as this device is covered by the “Know you’re
covered” 2-year warranty. We strive to provide our customers
with a positive experience and an outstanding service.
11
Loading...