Spypoint LING-4G, LING-4GV Quick Start Manual

In the box

Components

Note: Memory card and batteries are sold separately.

* Except LINK-4GV & other Verizon enabled cameras.

Navigation buttons

Viewing screen

Busy LED

12V/Solar panel jack

USB port

Micro SIM card slot
(excluding LINK-4GV)

SD card slot

Photo lens

LEDs

Test light

Battery case

Detection lens

Mounting bracket

Slot for installation strap

Tripod mount

Cable lock hole

Power button

Microphone

1

2

3

4

5

6

7

8

9

10

11

12

9

14

13

12

11

10

13

14

15 1716

18

15

16

17

18

INSERT THE MEMORY CARD

Before inserting or removing a memory card, always turn o the camera

to prevent loss or damage of the photos already recorded. Insert an SD/
SDHC memory card (up to 32 GB capacity) in the card slot, gold con­tacts facing up. The card is inserted correctly when a click is heard.

We suggest to format your SD card if it's been in another electronic
device to make sure you will have the maximum capacity of your
memory card.

REMOVE CAMERA FROM THE MOUNTING BRACKET

A. Push the tab to release the camera from
the mounting bracket.

B. Remove the camera.

CHOOSE A POWER SOURCE

In order to get best results and longer battery life, we recommend
the use of an external 12V source. For easier access to the 12V jack,
remove the camera from the mounting bracket before plugging a 12V
cable. Then, the camera can be reinstalled in the mounting bracket.

Getting started

6

8

7

A.

B.

Lithium battery pack

LIT-09/LIT-C-8

6 alkaline

or lithium AA

batteries

12V power source

Installation

strap

USB
cable

Camera

Quick start

guide

SIM card*









Mounting

bracket

Using your ngers, push down on each side of the

battery compartment's tab to open it.

To ensure maximum performance of the came­ra and prevent battery leak, we recommend
the use of new batteries. Make sure to insert
each battery with the correct polarity. Do not
mix battery type - use ALL alkaline or ALL
lithium. Rechargeable AA batteries are not
recommended as the lower voltage they
produce can cause operational issues.

2

1

1

2

3

5

4

Join the community

Our goal is to design & manufacture
innovative, premium products for the
hunting industry and to cater to all hunters
passionate about the lifestyle that is
hunting. We strive on oering all customers
a positive, user friendly experience that will
have a lasting impression.

THANK YOU

for choosing

User manual, latest rmware

& FAQ available at:

www.support.spypoint.com

 [e-mail]

 1-888-779-7646

QUICK START GUIDE

LINK-4G

LINK-4GV

( US ONLY )

• TRAIL CAMERAS

• HUNTING TABLET

• ACTION CAMERAS

& ACCESSORIES

v2.0

IMPORTANT TO DO

BEFORE THE END OF THE 30-DAY FREE TRIAL

In the LINK app, go activate your plan under the Account tab. For
more details about the available plans, look at the Account tab in
the App or follow the link below. If you choose not to activate a
plan, note that you’ll still be able to transmit/receive pictures with
our FREE monthly plan. It will allow you to transmit/receive up
to 100 photos per month with a photo history of the last 7 days.

WWW.SPYPOINT.COM/PLANS



Steel security boxes may reduce the
wireless functionalities of the product.

Photo rst : When this option is enabled, a photo is taken immediately
before each video.

Video lenght: Allows the user to select the duration of the recording.

SYNCHRONISATION SETTINGS

Cellular: Turn ON or OFF the transmission of pictures

First sync time: Allows the user to choose at what time of the day the
camera communicates for the rst time

Sync frequency: Allows the user to choose the number of synchronizations

that the camera performs in a day.

ADVANCED OPTIONS

Date format: Allows the user to set the date format as
Month/Day/Year or as Day/Month/Year

Temp. unit: Allows the user to select the temperature display.

Settings

Modify the mode of the picture settings, the synchronisation
frequency & all others

Photos

Let you see your pictures by date, month and years. Also let
you share or download the photo.

2. SETTING THE APP

The SPYPOINT App lets you congure all your settings of the camera.
Theses new settings will take eect the next time the camera connects

to update his status.

BASIC SETTINGS

Mode - PHOTO

Delay: Sets the time interval between each detection before
the camera records the next photo

Multi-shot: Takes up to 6 consecutive shots at each detection, with
a 5 second delay between each photo.

Sensitivity: Sets the detection sensitivity of the camera.

Mode - TIME LAPSE

Interval: This option allows the camera to take photos at regular
preset intervals without detection.

Mode - VIDEO

Delay: Allows the user to choose the time interval between each
detection before the camera can record the next video.

Sensitivity: Sets the detection sensitivity of the camera.

1. INSTALL THE SPYPOINT
LINK APP

The SPYPOINT LINK App lets you connect and control your camera
remotly using a smartphone or tablet. Features include viewing your
camera status, pictures, full camera control and more.

Install the free App

1. Make sure you have a data package with either your smartphone

or tablet or a Wi connection.

2. To install the App, you can either:

● Get it on Google PlayTM (Google Play is a trademark of Google Inc)

● Download on the App StoreTM (App Store is a trademarks of Apple Inc.)

3. Search for the SPYPOINT LINK App from SPYPOINT.

4. Install the App on your smartphone or tablet.

Run the SPYPOINT LINK APP

Start the app and it will walk you through a few questions. Press the

button at the buttom of the screen once you have nished. After, you
will receive an email conrming the activation.

Once in the app, you will have the following 4 options at the bottom:

Account

Select the data plan and modify your prole informations.

Status

See general informations like the cellular signal strength, battery
level or percentage of space used on your SD card.

Settings

Note: If you don’t have a smartphone or a tablet, please contact
our customer service to activate your camera.

Call us at our toll free number: 1-888-779-7646

Note: If you have more than one camera, it will let you select the
camera name with the white bar with a scrolling menu at the top
of the screen

3.INSTALLATION OF THE CAMERA

INSTALL THE CAMERA WITH THE SUPPLIED STRAP

Recommended installation height:

The camera should be installed at the same height as the animal’s
mid-body.

Ideal installation for quality pictures & videos:

The targeted animal should be 25 feet / 7.5m away from the camera for

a better eld of view.

To get brighter pictures at night , you should have elements in the

background to reect back the IR ash to the camera.

Note that the camera should not directly be facing the sun to avoid
back lighting and false detection.

TEST THE DETECTION OF THE CAMERA

When the DETECTION TEST mode is se­lected, no photo or video is recorded.
Pass in front of the camera from left to
right. When the camera detects motion,
the test light blinks to indicate that the
camera would normally have saved a
photo or video. If the system does not
detect the movement, increase the
detection sensitivity using the
SENSITIVITY option in the GENERAL
SETTINGS menu or realign the system

dierently.

VERIFY THE CELLULAR SIGNAL

To test the cellular signal, go to the
NETWORK TEST in the home menu.
Run the test and note it can take a few
minutes.

Once the test will be completed, it will display
that the test was performed with success.
You will then see the signal strength being
displayed on the top right corner with signal
bars and in “dBm”.

High <-75 / Normal -75 to -95 / Low >-95

If the Network Test was unsuccessful, move outside or get near a window
and re-run it a few times if need be to get all the information from the cell
network.

START THE CAMERA

Select the desired operating mode(photo, time lapse or video) on the
main mode by pressing OK.

When the mode is selected, the test light in front of the camera will

ash for 30 seconds to allow the user to leave the area without being

photographed or recorded.

(Conguration)

Photo

(Conguration)
Time lapse

(Conguration)

Vidéo

HOME

MODES

Start Camera

Network Test

Detection Test

View

Settings

Photo

Time Laspe

Video

HOME

Start Camera

Network Test

Detection Test

View

Settings

HOME

Start Camera

Network Test

Detection Test

View

Settings

Note: The signal bars on a LINK might not be equal to your other
cellular devices. There’s no industry standard and practice to label

dBm values to a specic number of bars. dBm is more accurate

than a number of bars. In the end, -50 is a great signal while -120
is a very poor signal.

Note: If you start the camera in Video mode, make sure that you
have enabled the Photo First setting.

Sit back, relax &

know you’re covered

All 2017 SPYPOINT trail cameras

are now covered by the
“ Know you’re covered ”

2 year warranty.

IMPORTANT TO DO

BEFORE THE END OF THE 30-DAY FREE TRIAL

In the LINK app, go activate your plan under the Account tab. For
more details about the available plans, look at the Account tab in
the App or follow the link below. If you choose not to activate a
plan, note that you’ll still be able to transmit/receive pictures with
our FREE monthly plan. It will allow you to transmit/receive up
to 100 photos per month with a photo history of the last 7 days.

WWW.SPYPOINT.COM/PLANS