Splendide WDC1025MCEE User Manual
corporate offices
warehouses
phone
fax
web
OWNERS MANUAL
CAUTION:
Before operating this app lian ce
it is recommended that you
read this manual and follow all
Safety Rules and Operating
Instructions.
COMBINAT ION WASHER & CONDENSER DRYER
MODEL WDC1025MC EE
®
When Technology Meets Ecology
Westland Sales / PO Box 427 / 15650 SE 102nd Ave / Clackamas, OR 97015 - USA
Clackamas, OR & Elkhart, IN /
www.westlandsales.com / www.splendide.com / e-mail splendide@westlandsales.com
503.655.2563 /
503.656.8829
TABLE OF CONTENTS
Record Serial & Model Number....……...
1
Line Drawing and Images..............………
8
Installation...........................................….
2
How To Wash.....................................…...
9
Removing Shipping Brackets…...
2
Operating Steps.......................…
... 9 Leveling..................................…..
2
Your First Load......................……
9
Grounding...........................................…..
3
Pre-Wash..................................…..
9
Plumbing………………………………...
3-4
How To Use Your Washer..................…...
10
Important Safety Instructions.............…..
4
Tumble Dry..............................…..
10
Recessed, Closet and Alcove Installation.
5
To Rinse, Spin and Tumble
-
Dry…
10
Laundry Preparation.................................
6
Wash Table..............................…..
10
Sorting..........................................
6
Laundry Aids.......................................…..
11
Inspection.....................................
6
Detergent Recommendations...…..
11
Pre-Treating..................................
6
Bleaches....................................….
11
Pre-Washing.................................
6
Liquid Fabrics Softeners..........…..
11
Laundry Aids................................
6
Stain Removal Chart...........................…...
11-12
Washer Features.......................................
7
Care and Cleaning............................……..
13 On-
Off Button..............................
7
Cleaning the Exterior................….
13
On/Off Water Saver Button……..
7
Cleaning the Interior..................…
13
Medium/High Spin Button...........
7
General Maintenance.....................
13
High/Heat Half/Heat Button.........
7
Cleaning the Drain Screen.............
13
Wash Timer..................................
7
Winterizing...........................................…..
13
Water Cycle Selector....................
7
Avoid
-
Service Check List ...................…..
13-14
Drying Timer................................
7
Cool Drying Period.......................
7
Drain Screen.................................
7
Detergent Dispenser.....................
7
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING
TO QUALIFIED SERVICES PERSONNEL.
T
he lightning flash with arrowhead symbol, within an equ ilateral triangle, is intended to alert the user to
the presence of unins
ulated
"Dangerous Voltage"
within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric s
hock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of impo
r-
tant operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
USE AND CARE OF YOUR
AUTOMATIC WASHER
-
DRYER
TO AV OID UNNECESSARY SERVICE CALLS
BEFORE USING WASHER
-
DRYER
Page 1
Your new appliance is a carefully engineered product.
Many times what appears to be a reason to call for
service, requires
nothing more than a simple adjustment
you can easily make in your own home .
You will be charged for a service call while the
appliance is in warranty if the problem is not caused
by defective product workmanship or materials
covered by this warranty.
To avoid a charge for an unnecessary service call, and
before calling a serviceman, please refer to the
Avoid
Service Check List
for situations that you can remedy.
This list is included at the back of this Use and Care
Book.
This appliance is an automatic washer
-
dryer. It is front
loading, with an extra large door opening for easier
access. It has
5 wash cycles in addition to extra rinse and
extra spin cycles.
You will obviously want to obtain the best possible
wash. B y
reading and following the instructions in this
booklet you will achieve excellent results.
Please ensure that the instructions a
re followed. If you
should need any further advice or assistance please
contact the dealer where your machine was purchased.
•The washer must be installed on a strong level floor, and
in a protected, dry, and well
-
ventilated area close to a
power and water supply of sufficient capacity, and a
sufficient dra
in outlet.
•Dryer installation and grounding should be done in
accordance with local codes by a qualified installer.
•"Installation Instructions" are included in your Use and
Care Manual for the installers reference.
•
The washer sho uld be plugged
into a properly grounded
three (3) prong electrical outlet of 115 Volt, 1300W,
12.5 A, 60 Hertz. It should not be controlled by
a wall
switch or pull cord which might be turned o ff accide
n-
tally.
The model number of this product may be found on the back of the unit; and the serial number on the label affixed to
the back o
f the unit.
You should note the model and serial numbers of this unit in the space provided, and retain this booklet as a perman
ent
record of your purchase to aid in identification in the event of theft.
MODEL NUMBER______________________________
SERIAL NU
MBER______________________________
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
INSTALLING YOUR WASHER
-
DRYER
IMPORTANT
In the accessories bag you will also find a spanner that
is to be used for removing brackets and leveling
washer
-
dryer
feet.
REMOVING SHIPPING BRACKETS
1.
Remove back panel screws and lift panel clear
(Fig. 1).
2.Remove fixing screws from the fo ur
brackets and
cross bearing (Fig. 2) then remove brackets.
3.Fix back panel with 3 screws previously removed
(Fig. 3).
4.Close the
4 holes on the cabinet with the plastic
blanking plugs that you will find in the accessories
bag (Fig. 3).
L
EVELING
After selecting a permanent location, the machine
should be properly leveled to prevent vibration.
To do this, adjust one or b
oth front levelers, as needed,
after loosening the lock nuts. Once your washer is pe
r-
fectly leveled, be sure to tighten the lock nuts (Fig. 4).
Page 2
FOR YOUR OWN PROTECTION, AND TO PREVENT ACCIDENTS, INJURY AND FIRE, PLEASE READ
THE FOLLOWING CAREFULLY :
•
Destroy the carton and plastic bags after the washer
-
dryer has been unpacked.
Children sho uld ne ver b e le ft alo ne or unatt ende d
in the
area where appliances are located.
Washer installation and grounding must be done in
accordance with local codes by a qualified installer.
Installation instructions are included in this manual for
the installer's
reference.
Use only low sudsing detergents suitable for front
loading washers, or a small amount of regular dete
r-
gent. The soap suds should never exceed the mid
-
line
of the port
-
hole.
The washer must be plugged into a properly grounded
three (3) prong electrical outlet. For your safety, the
third or round grounding prong must never be removed.
DO NOT USE AN EXT
ENSION CORD.
•Repair or replacement of a part should be made only by
a qualified service technician to prevent personal injury
or damage to the machine. Ask your dealer for a list of
authorized re
pair service companies.
Disconnect power to the washer at the circuit breaker or
fuse box, or unplug the machine in an emergency, or
when servicing is required. Have the installer show you
and label the prope
r switch or fuse at the electrical
disconnect box.
WARNING
-
The Appliance Should Be Connected To
An Individual Branch Circui
t With No. 14 AWG Wire
And Protected By 15 A Fuse or Breaker.
•
•
•
•
•
PLUMBING (Water Inlet)
The straight end of these hoses should be connected to
the supply (Fig. 4). The 90° angled end of these h
oses
should be connected to the inlet valves on the back of
the machine, using one of the washers to make a water
tight seal on
each connection. The couplings should be
tightened by hand, a tool should only be used if a leak
occurs.
Do not use excessive f
orce (see M, Fig. 1).
The Inlet valves are color
-
coded:
Red = Hot
White = Cold
It is possible to run the machine on cold wate
r only,
but a water supply must be connected to each inlet
valve. To do this we suggest you use "F" connector,
supplied with the
washer
-
dryer (see N, Fig. 2).
IMPORTANT
Make sure the drain hose is not kinked and the water
flow is not restricted.
Standpipe Drain System:
When a st
andpipe installation is used it must be at least
1¼" (3.2 cm) in diameter with a minimum carry away
capacity of 7 gallons (
26 liters) per minute.
Wall or Floor Standpipe Drain:
Top of standpipe must be at least 25" (62 cm) high and no
higher than 34"
(86 cm) from bottom of washer (A & B).
Page 3
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the ris
k of electric
shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having
an
equipment
-
grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly inst
alled and grounded in accordance with all local codes and ordinances.
WARNING
-
Improper connection of the equipment
-
grounding c
onductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whet
her the appliance is properly grounded.
Do not modify the plug provided with the appliance.
If it will not fit the outlet, have
a proper outlet installed by a qualified electrician.
PLUMBING (Water Outlet)
You should carefully position the drain hose to avoid
kinks and ensure proper drainage of the water.
The
outlet end of the drain hose must be at least
20" (50 cm) above the base of the machine. At this
point it is possible for the w
ater to be discharged into
a sink, standpipe or drainpipe.
No more than 6" of the drain hose should insert into a
standpipe. A
ssure an air break is available to prevent
the machine from siphoning in a standpipe.
Loading...