Spicer Driveline Part Number Nomenclature User Manual

SPICER DRIVELINE PART

®

NUMBER NOMENCLATURE

Use the chart to identify Genuine Spicer® driveline parts except for:

- Journal & Bearing Kits

- Support Bearing Assemblies

- Driveshaft Assemblies

- Tubing

1st Number 2nd (Center) 4th Number
Set = Joint Number Set = 3rd Number Set = Set =
Series Part Type Serial Number Additional
Information

3 - 4 - 6561 - 1x

22 SPL22 1 Companion Flanges X Sub-assembly
25 SPL25 2 Flange Yokes KX Slip yoke including dust cap
30 SPL30 3 Slip Yoke Assy KXM Slip yoke w/ dust cap &
36 SPL36 4 End Yokes metric bolt holes
55 SPL55 7 Snap Rings SB Super bulk pricing available
70 SPL70 14 Dust Caps 1 Half-round
90 SPL90 15 Dust Cap Washers 1X Half-round assembly
100 SPL100 16 Seals
140 SPL140
170 SPL170 26 Center Yokes
250 SPL250 27 Tube & Yoke Assy
28 Tube Yokes
10 1000 30 & 32 Tubing
1 1100 40 & 42 Tube Shafts
2 1210-1330 & 7290 53 & 57 Midship Tube Shafts
3 1340-1480 55 Spline Sleeves
4 1550 68 Caps & Plugs
5 1610 &1650 70 Bearing Strap Kits
6 1710 73 Bearing Cap Hardware

6.3 1760 82 Yoke Shafts

6.5 1810 83 Socket Yokes
8 1820 & 1880 86 One Piece Dust Caps
9 1950 (See GWB) 94 U-Bolt Assm
95 Center Bearing Retainers
4C 4C Wing Bearing 98 Lock Straps
5C 5C Wing Bearing
6C 6C Wing Bearing
7C 7C Wing Bearing

8.5C 8.5C Wing Bearing
8C 8C Wing Bearing
9C 9C Wing Bearing
10C 10C Wing Bearing

Actual Part Number Example

www.spicerparts.com

Dana Holding Corporation 2011 Form # J3323-DAG

SPICER PART NAMES,

Rectangular Circular

J300P SECTION 1

Companion Flanges

(Part Type Number Set = 1)

®

TYPES & NUMBERS

J300P SECTION 2

Flange Yokes

(Part Type Number Set = 2)

J300P SECTION 3

Slip Yokes Splined Sleeves
(Part Type Number Set = 3) (Part Type Number = Set 55)

J300P SECTION 5

Tube Yokes Center Yokes &
(Part Type Number Center Plates
Set = 26 or 28) (Part Type Number
Set = 26)

J300P SECTION 7 J300P SECTION 7

Tube Shafts Midship Tube Shafts
(Part Type Number Set = 40 or 42) (Part Type Number Set = 53 or 54)

J300P SECTION 6

Tubing Yoke & Tube Assemblies
(Part Type Number Set = (Part Type Number Set = 27)
30 or 32)

J300P SECTION 4

End Yokes

(Part Type Number Set = 4)

J300P SECTION 9

Miscellaneous Parts

• bolts

• nuts

• dust caps

• balance weights

J300P SECTION 8

Yoke Shafts

(Part Type Number Set = 82)

OLD STYLE: Identify the part by the 2nd (center) number set (as shown on the previous page) of the complete part number. In the complete part

number, with the exception of Journal & Bearing Kits, Support Bearing Assemblies, Driveshaft Assemblies, and Tubing, the:
1st Number Set — Indicates the Joint Series
2nd Number Set— Indicates the Part Type
3rd Number Set— Indicates the Serial Number
4th Number Set— Indicates Additional Information

• keys

• tube deadeners

• snap rings