Sper Scientific 840052 User Manual

OPERATION MANUAL
840052 SOFTWARE
for Sper Scientific Meters
INDEX
Page Introduction
Introduction
1 1
Features
2
Software Installation
3
Main Screen
4
a) Block Description b) Alarm HI/LOW Setting
Start Recording
5
Retrieve File
6
Save File
7
Com. Port Setting
7
Logger Setting
8
Display Range
9
9
Display Control
Product : Manometer
12
13
Product : pH Meter
14
Product : Sound Level Meter Product : Hygro-Thermometer
15
Product : Dual Input Thermometer
16
Product : Single Input Thermometer
17
Product : Anemometer
18
Product : Dissolved Oxygen Meter
19
20
Product : Anemo-Psychrometer
21
Product : IR Psychrometer
22
Product : Psychrometer
23
Statistic
24
25
25
Print Graph Logo Setting Warranty
Index
INTRODUCTION:
Thank you for purchasing the RS232 software which is used for the following products to on-line logging data to PC for further analysis.
a) K.J.T or K.J.T.R.S.E.type Thermometer. b) pH /mV meter. c) Hygro-thermometer & Psychrometer d) Digital Sound Level Meter. e) Anemometer. f ) Manometer. g) Conductivity meter. h) IR Psychrometer i) D.O. Meter
Or more Hand Held meters with RS232 interface feature. This software is user-freindly to meet your maximum satisfaction.
FEATURES:
Up to 10,000 sample readings with real-time clock memory. Programmable sample interval from 1 second to 3,600 seconds. User-defined maximum (High) and minimum alarm (Low) setting. Allow further analysis by downloading data to computer program.
To assist data analysis and process control, all data is saved in text format (.txt) and can be easily transformed for use by Microsoft Office software applications.
Note:
Microsoft Office is a registered trademark of Microsoft Corporation.
R
1
THE PACKAGE IS SUPPLIED WITH:
1) A CD ROM.
2) RS232 cable with D-sub connector.
3) Operation manual.
Hardware requirement:
Windows 98/2000/NT/XP operation system with COM1 to COM4 serial ports.
Installation procedure :
1. Connect the socket of RS232 to COM port.
2. Insert CD-ROM to the computer for starting software set up.
3. See the diagram as an example of RS232 Software for your Hand held meter.
Install Software Run the set up installation program
a) b)
Web Site Visit our web site in your browser
c)
Brow CD-ROM Browse the CD-ROM using Windows
d)
Manual To view the detail operation manual
e)
Exit Exit the software installation
2
EASY OPERATION:
Diagram A shows when you enter the program and before connecting with any Hand Held meters. While there is no meter connected, the reading in two blocks showed without title.
Diagram A
Take Psychrometer (Dual K Type Input) as example
While linking with your personal computer , you will see "Air" and "RH" displayed. (See Diagram B)
Left Side :Display AIR Temperature Right Side : Display RH (Humidity Value)
3
Diagram B
If a meter could export more than two parameters, users could choose any two of them to set alarm values.( See Diagram B-1)
Diagram B-1
Click Alarm SW button (See Diagram C) to active the limit setting, afterwards, High/ low limit can be keyed in directly or by clicking to increase or to decrease figures.
4
Diagram C
Real time Value
Diagram D
Real time "Air" temperature shows at the left side temperature block (See Diagram D).
Alarm will be sparkling in red if a measured value exceeds the high limit or below the low limit.
START RECORDING
Diagram E
On-line logging started
Press START button to active the recording. When starting, the text "Logging Data" will appear on the left corner of the graphic. All parameters will be shown with different color curves. Different color texts show below the chart indicate the meaning of each curve. For
example: black curve is Air, red curve is RH......etc.(See Diagram E)
5
RETRIEVE FILE
Retrieve File
Diagram F
TO OPEN A FILE
1. Clicking " Retrieve File" on the tool bar or press Alt+R. You will see Diagram F-1.
2. Double-click the folder that contains the document you want to open. Click the document name, and then click OK.
3. All documents are saved as *.txt file types, no other files type are valid.
Diagram F-1
6
Loading...
+ 18 hidden pages