Spektrum SPMAS6410NBL User Manual
AS6410NBL User Guide
1
EN
NOTICE
All instructions, warranties and other collateral documents are subject
to change at the sole discretion of Horizon Hobby, Inc. For up-to-date
product literature, visit horizonhobby.com and click on the support tab
for this product.
Meaning of Special Language
The following terms are used throughout the product literature to indicate
various levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility
of physical property damage AND a little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR
create a high probability of superfi cial injury.
WARNING: Read the ENTIRE instruction manual to become
familiar with the features of the product before operating. Failure
to operate the product correctly can result in damage to the
product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution
and common sense and requires some basic mechanical ability. Failure to
operate this Product in a safe and responsible manner could result in injury
or damage to the product or other property. This product is not intended
for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components or augment product in any way
without the approval of Horizon Hobby, Inc. This manual contains instructions for safety, operation and maintenance. It is essential to read and
follow all the instructions and warnings in the manual, prior to assembly,
setup or use, in order to operate correctly and avoid damage or
serious injury.
WARNING AGAINST COUNTERFEIT PRODUCTS
Thank you for purchasing a genuine Spektrum product. Always
purchase from a Horizon Hobby, Inc. authorized dealer to ensure
authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all
support and warranty with regards, but not limited to, compatibility and
performance of counterfeit products or products claiming compatibility
with DSM or Spektrum technology.
Age Recommendation: Not for children under 14 years.
This is not a toy.
NOTICE: This product is only intended for use with unmanned, hobby-
grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims
all liability outside of the intended purpose and will not provide warranty
service related there to.
WARRANTY REGISTRATION
Visit www.spektrumrc.com/registration today to register your product.
2
AS6410NBL User Guide
The AS6410NBL 6-channel Ultra Micro AS3X® Receiver with brushless speed
control and X-Port™ technology is designed for ultra micro aircraft. Featuring
DSM2®/DSMX® technology, the AS6410NBL is compatible with all Spektrum™,
JR®, E-fl ite® and ParkZone® 2.4GHz DSM2®/DSMX® technology transmitters.
NOTICE: The AS6410NBL receiver is not compatible with the DX6 park fl yer
radio system.
AS3X Stabilization
DELIVERS BREAKTHROUGH PERFORMANCE
The AS6410NBL features AS3X technology, an electronic enhancement
system that makes it possible for you to experience super-smooth fl ight
performance, yet still have full control authority for sport, scale or 3D fl ight.
Turbulence, torque and tip stalls are just some of the many complications
to assess when trying to achieve smooth fl ight. The Horizon Hobby world
class team of RC pilots developed the AS3X System for airplanes based
on the successful use of AS3X with ultra micro fl ybarless helicopters. The
AS3X System invisibly helps with complicated corrections, allowing you to
experience ultra smooth fl ight performance that feels so natural, that you’ll
quickly build confi dence in the capability of the airplane. The AS6410NBL
setup is easy. Just bind your DSM2/DSMX transmitter to your AS6410NBL
using a basic airplane program and AS3X will assure that the locked-in feel
and control authority you want is instantly at your command to help show
off your RC pilot skills. The AS6410NBL will innovate the way you’ll want to
fl y now and in the future.
The AS6410NBL receiver defaults the AS3X system to OFF. To activate
AS3X, the optional Spektrum AS6410NBL USB Interface (SPMA3060) is
required. The X-port must be active to program the AS6410NBL using the
USB interface SPMA3060).
EN
The AS6410NBL includes an RF telemetry data feature. RF telemetry data
displays Frame Losses and Holds. No Fade or Receiver Voltage information
will be available.
Features
• 6-channel ultra micro AS3X
receiver
• Integrated programmable brushless speed control
• Weighs just 6.4 grams
• AS3X stabilization technology
• Compatible with optional Spektrum
2.3-Gram Performance Linear
Long Throw Servo (SPMSA2030L)
• Smart Bind™ technology
• X-Port allows for future expansion
• RF telemetry data (Frame losses
and Holds only).
3
EN
Applications
The AS6410NBL is designed for ultra micro aircraft and is ideal for
scratch-built ultra micro projects. The AS6410NBL is designed to utilize a
two-cell LiPo battery. You can use the integrated brushless speed controller
to power a brushless motor up to 4.9 amps of continuous current. An
integrated X-Port feature allows for future expansion.
When X-Port is active, CH5 and CH6 are not available; however, reversed
aileron (CH2) is still available.
AS6410NBL Specifi cations
Type: .................................................................DSM2/DSMX ultra micro
Channels: ..........................................................6 or 4 channels, plus X-Port
Modulation: ......................................................DSM2/DSMX
Dimension: .......................................................(WxLxH): 25.00 x 35.00 x
Weight: ..............................................................6.4 g
Input Voltage Range: .......................................2-cell LiPo 6.4 to 8.4V
Antenna Length: ..............................................31mm
Resolution: .......................................................1024
Compatibility: ...................................................All DSM2/DSMX aircraft
AS3X receiver with
integrated brushless speed
controller
8.00 mm
transmitters
Speed Controller
Type: ..................................................................Integrated programmable
Max continuous current: .................................4.9 amps
Overload protection current: ...........................5.8A for 1ms
BEC continuous current: .................................1A
BEC overload protection current: ...................1A, 4.2V
Low-voltage cutoff: .........................................At <6.3V, the motor begins
Over-current protection: .................................At 5.8A, the motor cuts off
Temperature protection: .................................at 120°C, the motor cuts off
Programming features: ...................................See “Programming the
brushless
to pulse
At <6.1V, the motor cuts off
and the LED flashes
until the throttle stick is
pulled down to idle
Brushless ESC”
4
AS6410NBL Features and Ports
Battery Input
Elevator (CH3) Servo
Brushless
Motor Leads
EN
Rudder (CH4) Servo
Aileron (CH2)
Reversed Aileron
(CH2) or Aux1 (CH6)
X-Port (all 4 pins)
OR
Gear (CH5) (3 pins to the left)
Antenna
ReceiverInstallation
We recommend using double-sided foam tape and/or minimal hot glue
in the corners to install your receiver in the fuselage. The servos must be
in the appropriate position to attach to and drive the elevator and rudder
pushrods.
The motor wires must be aligned parallel to the fuselage of the aircraft for
correct AS3X Stabilization.
Do not install the receiver in the aircraft as shown.
Do Not install
with motor wires
parallel to the
wings
CAUTION: If AS3X is active and the receiver is not installed correctly,
the aircraft will crash.
Servos
Specially designed servos are available from Spektrum.
NOTICE: Using any other servo(s) may cause damage to the receiver and/or
void the servo warranty.
Do Not install
with motor wires
perpendicular
to the wings.
5
Loading...