Page 1
1
Spectra S1
Page 2
2
Contents
Welcome to your Spectra Breast Pump ......................................................................... 4
Features .......................................................................................................................... 4
Important Safeguards ........................................................................................................ 5
Hygiene .......................................................................................................................... 5
Pain or Discomfort ........................................................................................................ 5
General Safety Guidelines ............................................................................................ 6
Package Contents .............................................................................................................. 7
Pump Kit ......................................................................................................................... 8
Cleaning & Care ............................................................................................................... 10
Washing Breast Pump Parts ...................................................................................... 10
Cleaning & Care Tips................................................................................................... 11
Cleaning & Care Quick Reference Chart .................................................................. 12
Sterilising Breast Pump Parts ..................................................................................... 13
Boiling ....................................................................................................................... 13
Steam Steriliser ....................................................................................................... 13
Breastshield Sizing ........................................................................................................... 14
Measuring Your Nipple ............................................................................................... 14
Signs Your Breastshield Is Too Small ........................................................................ 15
Signs Your Breastshield is Too Large ........................................................................ 15
For Your Information .................................................................................................. 15
Assembling the Spectra S1 ............................................................................................. 17
Backflow Protector Assembly ............................................................................... 18
Adaptor Assembly ................................................................................................... 19
Preparing to Pump ........................................................................................................... 20
Charging your S1 ......................................................................................................... 20
Pumping Instructions ...................................................................................................... 21
Page 3
3
Single Pumping ............................................................................................................ 22
Double Pumping .......................................................................................................... 22
Things to Remember ................................................................................................... 23
Tips for Expressing Breast Milk ................................................................................. 23
Functions & Controls ...................................................................................................... 25
Massage Mode & Expression Mode ......................................................................... 25
Vacuum Intensity ........................................................................................................ 26
Cycle Speed ................................................................................................................. 27
Night Light ................................................................................................................... 28
Battery Life .................................................................................................................. 28
Milk Storage ..................................................................................................................... 29
Important Safeguards ................................................................................................. 31
Thawing Frozen Breast Milk .......................................................................................... 31
Feeding Breastmilk .......................................................................................................... 32
Warming Milk .............................................................................................................. 32
Safely Bottle-Feed ...................................................................................................... 32
Bottle Assembly ...................................................................................................... 33
Troubleshooting ............................................................................................................... 34
Warranty ........................................................................................................................... 36
Disposal ............................................................................................................................ 36
Flying with the Spectra S1 .............................................................................................. 37
For More Information ..................................................................................................... 37
Instructional Videos .................................................................................................... 37
Technical Specifications .................................................................................................. 38
Environmental Conditions .......................................................................................... 38
Performance Characteristics ...................................................................................... 38
Electromagnetic Compatibility ....................................................................................... 39
Page 4
4
Welcome to your Spectra Breast Pump
Congratulations on becoming the owner of a Spectra S1 hospital grade
double electric breast pump. Your Spectra S1 is designed to make life easier
for you, with a host of features to ensure effective expressing. If you have
any questions about using your Spectra S1, please check our website for
more information or get in touch with our customer service team at any
time.
Spectra Baby Australia
www.spectra-baby.com.au
Features
• Double-Sided Pumping: Your Spectra S1 comes with everything you
need for double pumping. Expressing from both breasts at the same
time saves you time and better supports milk supply.
• Letdown Mode: Switch with a touch to the letdown mode, which is
a light, quick fluttering mode designed to speed the start of milkflow,
just the way your baby does.
Page 5
5
• Fully Adjustable Cycle and Vacuum Settings: Touch button controls
allow you to easily adjust the cycle and vacuum levels until you find
what works best for your body.
• Night Light: Choose from two different light levels on the Spectra
S1’s integrated nightlight, a feature you will love when pumping at
night.
• Stylish, Portable Design: Spectra has endeavored to make the most
portable and convenient hospital grade pump ever, with a
rechargeable battery, integrated handle, and integrated bottle stand
to make life a little easier.
Important Safeguards
Carefully read all the instructions prior to using the Spectra S1. Follow the
safety guidelines below when using your pump. Failure to follow the below
guidelines may result in damage to the machine and/or serious injury to
yourself.
Hygiene
• The pump kits that come with this pump are for single use only and
are not intended for multiple users. If this pump is shared by multiple
users, every mum must have her own shield kit. Use by multiple users
risks the spread of transmissible diseases.
• This breast pump is a closed system with the use of the backflow
protector, preventing milk from entering the system tubing.
• Always follow the directions in this manual for cleaning and storage
of your breast pump and parts.
• Failure to follow the guidelines provided or use of the Spectra S1
with attachments not recommended by the manufacturer may pose
a health risk and will void the warranty.
Pain or Discomfort
You should not experience pain or discomfort when using your breast pump.
Do not turn the suction level above your comfort level. Ensure that the
breast shields are fitted correctly (see the Breastshield Sizing portion of this
Page 6
6
manual on page 14 for more information). If you experience pain or
discomfort, stop using the breast pump and seek help from your care
provider, a certified lactation consultant, or the Spectra customer service
team, as appropriate.
General Safety Guidelines
• Close supervision is necessary when used near children.
• Use the product only for its intended use and with attachments
recommended by the manufacturer.
• Handle the power cord, adapter and plug with care; do not leave on
a heated surface, do not pull on or twist the power cord, do not wrap
the cord around the adapter body.
• Do not use near water.
• Do not use in the presence of concentrated oxygen or pressurised
gases.
• Unplug and store out of reach of children when not in use.
Page 7
7
Package Contents
The Spectra S1 comes complete with a power adaptor, 2 milk collection
kits, and 2 feeding kits (bottle caps, soft flow teats, bottle necks, and bottle
sealing discs).
Replacement parts and additional breastshield sizes are available to purchase
on the Spectra website.
Spectra Baby Australia
www.spectra-baby.com.au
Page 8
8
Pump Kit
The Spectra S1 comes with 2 milk collection kits. Included in each kit is a
breastshield (size 24mm), backflow protector, collection bottle, duck valve,
and tubing.
Replacement parts and additional breastshield sizes are available to purchase
on the Spectra website.
Spectra Baby Australia
www.spectra-baby.com.au
Page 9
9
Page 10
10
Cleaning & Care
Note: These guidelines are for use with a healthy, full-term baby and assume that
you have access to potable water. If your baby is premature or has health
challenges your care provider may supply alternative advice. If you live in an area
without potable water, you should always sterilise parts before use. Always follow
the advice of your care provider.
• Sterilise all parts (except the pump motor and tubing) before first use.
• You do not need to sterilise parts used with breastmilk after every
use. Thorough washing with warm soapy water and air drying after
each use is sufficient. You may wish to sterilise on occasion to ensure
fat residue is removed.
• You do need to sterilise breast milk storage containers that will be
used to store and freeze breast milk, such as bottles, before first use.
Most milk storage bags come pre-sterilised; verify with the
manufacturer prior to use.
Washing Breast Pump Parts
1. Wash your hands with warm soapy water.
2. Disassemble all parts and wash in warm, soapy water and then rinse
thoroughly in hot water. The top rack of the dishwasher is fine for all
parts except the duck valve and backflow protector membrane (i.e.
the silicone parts). Do not place silicone parts including valves and
backflow protector diaphragms in the dishwasher. You may wish to
soak the parts in warm soapy water for several minutes prior to
washing, as well.
3. Use a bottle brush to ensure that there is no milk residue anywhere
in the parts. Try to be careful with the membranes and valves, as they
are the most fragile part of the kit.
4. Do not wash the valves or membranes in the dishwasher. Flush the
valve with hot soapy water and carefully remove any milk residue
with a bottle brush.
5. Place parts on a clean dish drying rack or clean paper towel to air dry
after washing. Do not use cloth to dry your breast pump parts as it
Page 11
11
may harbour bacteria that can
contaminate breast milk. Try not to
touch the inside of any parts that
will come into contact with breast
milk.
6. Once dry, store parts in a clean,
closed container (i.e. snaplock bag
or clean plastic tub with a lid).
7. Never immerse your pump motor in
water. Wipe clean with a damp
cloth as needed.
8. Never wash or sterilise the tubing. When used correctly, the
backflow protector stops milk from entering the tubing. If milk should
somehow enter the tubing, we recommend replacing the tubing. If
tubing should become wet, make sure it is completely dry before
pumping as not to damage the motor.
9. The backflow protector does not need to be washed after each use.
If you notice moisture in the backflow protector, disassemble and
wash each of the three parts separately. Allow to air dry completely
before reassembly.
Cleaning & Care Tips
Valves that are difficult to remove from the shield to wash, or slip off the
shield during pumping, may need replacing, or may have a residue of fatty
milk build-up. This can be helped by cleaning the shield and valves
thoroughly, and washing them in a mix of 1 part vinegar 3 parts hot water to
release the fatty residue. (This can be the case with bottles coming loose
from shields too, and same solution).
Page 12
12
Cleaning & Care Quick Reference Chart
Sterilise
Before First
Use?
Wash After
Each Use?
Dishwasher
Safe?
Special
Instructions
Pump Motor
No
No
No
Wipe down
with a damp
cloth as
needed.
Tubing
No
No
No
Replace if dirt
or moisture
gets in.
Backflow
Protector
Yes
No
No: do not
place silicone
diaphragm in
dishwasher.
Yes: plastic
outer pieces
only.
Wash only if
moisture
enter the
component.
Do not wash
silicone
diaphragm in
dishwasher.
Breastshield
Yes
Yes
Yes
Duck Valve
Yes
Yes
No
Do not wash
in dishwasher
Collection
Bottle
Yes
Yes
Yes
Bottle Cap
Yes
Yes
Yes
Sealing Disc
Yes
Yes
Yes
Teat
Yes
Yes
No
Do not wash
in dishwasher
Bottle Cap
Yes
Yes
Yes
Page 13
13
Sterilising Breast Pump Parts
You can use any method you like to sterilise the parts of your Spectra pump.
Please remember that you must never sterilise the tubing or pump motor. In
most cases, you do not need to sterilise after every use of your breast pump;
over-sterilising will cause your pump parts to wear and require replacement
more quickly. Your care provider may have given you alternative sterilisation
instructions if your baby was born prematurely or has an illness: always
adhere to your care provider’s instructions.
You do need to sterilise all parts (except tubing and pump motor) before first
use. All parts must be disassembled prior to sterilising. Disassemble the
backflow protectors and remove the duck valves from the breastshields
prior to sterilising.
Choose from any of the following instructions to sterilise pump parts:
Boiling
1. Place all the equipment in a large
sauce pan and cover with tap
water.
2. Check that there are no air
bubbles inside bottles or other
parts.
3. Place the lid on the saucepan and
bring to a boil.
4. Boil for 5 minutes, making sure
that the pot doesn’t boil dry and
melt the equipment.
5. Turn off the heat and allow to cool.
6. Remove parts with tongs and air dry on a clean dish rack or clean
paper towel.
Steam Steriliser
Follow the manufacturer's directions.
Tip: Frequent microwave sterilising of breast pump parts and bottles may cause
discoloration. This does not affect usability or safety of the parts.
Page 14
14
Breastshield Sizing
Measuring Your Nipple
The Spectra S1 comes with size 24mm
breastshields. This is the most commonly
fitted shield size; however, many women
will fit better in other sizes. A properly
sized breastshield is important to ensure
the best performance of your pump. An
improperly fitted breastshield can hinder
milk output, cause discomfort, and in
extreme cases cause injury. To determine
the shield size you need, pump for 5
minutes using the provided shield(s). Your nipple(s) will expand while milk is
being expressed so it’s important to measure after it has swollen to ensure
the size you select will provide adequate room. After you pump, measure the
diameter of the nipple(s) at the base as illustrated in the image to the right.
Select a shield size that is 2-3mm larger than this measurement.
See below for fitting examples:
Shield is Too Small
Ideal Fit
Shield is Too Large
Nipple is not moving freely
within the flange: there
should be 2-3mm of space.
2-3mm of space around
nipple; a small amount of
areola may enter the flange.
Excess areola is drawn into
the flange, there is excess
space around the nipple,
and the nipple is being
pulled toward the end of
flange.
Page 15
15
Note: The images presented in this section are a guide, not a rule, therefore fitting
may appear differently for all women.
Signs Your Breastshield Is Too Small
• Painful rubbing of nipple in flange.
• Nipple not moving freely inside of flange.
• Redness of the nipple.
• Whiteness of the nipple and/or a white ring around the base of the
nipple.
• Little milk is being expressed.
• General discomfort while pumping.
Signs Your Breastshield is Too Large
• Excess areola is drawn into the flange (a small amount of areola may
enter the flange for some women; however, it should never be
uncomfortable or painful).
• Sensation of pulling and/or pulling pain.
• Nipple is pulled to the end of the flange.
• Shield falls from the breast while pumping.
• Little milk is being expressed.
• General discomfort while pumping.
For Your Information
Although the above instructions provide a good indication of the size of
breastshield you will need, there are few things to consider:
• Every woman’s body responds differently to pumping. It is possible
your measurements before pumping might change during pumping,
therefore we suggest taking measurements of the swollen nipple 5
minutes after pumping.
• Your measurements might be different throughout the day. For
example, you might be fuller in the morning after going a few hours
without pumping and/or feeding at night, warranting a larger size.
You might also be smaller in the evening after consistent pumping or
feeding throughout the day.
Page 16
16
• You might be larger at the beginning of a pumping session, and
smaller after some milk has been expressed.
• Your measurements might change after your milk supply is well-
established (about 10 weeks postpartum).
• One breast may perform better with a different sized breastshield
than the other.
If you are experiencing friction, pain, or discomfort while pumping, contact
us for help. Additional breastshield sizes are available on our website. If you
need assistance selecting a shield size, please do not hesitate to contact our
expert customer support team!
Spectra Baby Australia
www.spectra-baby.com.au
Page 17
17
Assembling the Spectra S1
Before using your Spectra S1 for the first time, you will need to sterilise all
parts, except for the pump motor and tubing (sterilising the pump motor and
tubing will cause irreparable damage and void the warranty). For more
information on sterilising and washing the parts that come with your pump,
please refer to the Cleaning & Care section of this manual (page 10).
Page 18
18
1. Attach the silicone duck valve to the underside of the breastshield.
2. Screw the milk collection bottle into the underside of the
breastshield.
3. Assemble the backflow protector as illustrated below by inserting the
membrane into the base, then inserting the top into the base and
turning clockwise to secure.
4. Fit the backflow protector into the top of the breastshield. Use a
screwing motion to attach and remove this part to avoid damaging it.
5. Connect the tubing to the backflow protector.
6. Connect the tubing to the Spectra S1. For double-pumping, remove
the cap on the airport. For single-pumping, make sure this cap
remains in place (see below, right).
7. Insert power adaptor, if necessary.
Backflow Protector Assembly
Ensure that the backflow protector has been sterilized and allowed to
completely dry on a clean paper towel prior to assembly. The backflow
protector does not need to be cleaned or sterilized prior to each use - only if
moisture should enter the component. Always inspect the backflow
protector for moisture and damage prior to pumping. Membranes should be
replaced regularly; see Preparing to Pump
(Page 20) for more information.
1. Insert the membrane into the
bottom piece (the piece that
connects to the breastshield) as
illustrated to the right. Ensure that
it fits snugly into and curl the
membrane lip around the rim of the
bottom piece.
2. Fit the top piece (the piece that
connects to the tubing) over the
bottom piece and membrane by
pressing the bottom snugly into the
rim of the top piece.
Page 19
19
Adaptor Assembly
1. Connect the power charger and the Australian adaptor by pushing
the two components together.
2. You will hear a loud click once they are fully assembled. When fully-
assembled, the Australian adaptor will be locked in place (not move
freely) and require a significant amount of force to remove it.
Note: When assembled properly, the Australian adaptor will not be visible from
the back side (see image below).
Page 20
20
Preparing to Pump
Prior to pumping, make sure your pumping kit has been sterilised. Refer to
the Sterilising Breast Pump Parts section of this manual (page 13) for
information on proper sterilization of parts.
Wash your hands thoroughly in warm soapy water prior to handling parts
that come in contact with the breast or breast milk.
Inspect parts for damage. Do not use parts if they are damaged. Do not use
silicone parts such as membranes or duck valves if they are torn. To maintain
suction and overall functionality of the pump, silicone parts need to be
replaced regularly. Replacement parts are available on www.Spectra-
Baby.com.au; contact us if you need assistance.
Replacement
Frequency:
Pump Once Daily
Pump Twice or
More Daily
Duck Valve
2-3 Months
4 weeks
Backflow Protector
6 months
3 months
Charging your S1
The S1 can operate on battery power or while plugged in and charging. To
charge your S1, connect the power adaptor to the port on the back of the
pump. Then, connect the adaptor into the power mains (for information on
assembling your power adaptor, see Adaptor Assembly on page #). The
S1 should be fully charged after 4 hours and should operate for 3 hours
on a fully charged battery.
Page 21
21
Pumping Instructions
1. Relax and stimulate your letdown reflex. Some women find that
breast massage, looking at photos of their baby, listening to
recordings of their baby, or smelling their baby’s clothing items
assists with letdown. Some women have success using just the
massage mode of the Spectra pump to stimulate letdown as well.
2. Centre the breastshield on your
breast so that the nipple is centred
in the flange (see right).
3. Press the button. The screen will
light up and the pump will initiate.
4. Press the button to enter
Massage Mode, to stimulate
letdown. Massage Mode is a fast
method of pumping designed to
initiate your letdown, the start of
milk flow.
5. Once your milk starts flowing, press
the button again to enter
Expression Mode. Expression mode mimics the slow, deep suckling
of your baby once the milk has begun flowing.
6. Adjust the vacuum to comfort level. Start with the vacuum on low,
and then gradually increase the vacuum setting to your comfort level.
Never set the vacuum level higher than your comfort level.
7. Express milk until the breast is empty (this can take 15 minutes or
longer). To maintain supply for an exclusively breastfed baby, we
recommend pumping every 2-3 hours, or 7-8 times per day for long
enough to completely drain the breast; then, an additional 5 minutes
to signal the demand for the body to make more milk.
8. When you wish to stop expressing, press the power button then
remove the milk collection kits from your breasts. Do not attempt to
remove the collection kits without first breaking suction. Turning off
the pump will break suction.
Note: When powered back on, the Spectra S1 will automatically start off at the
most recently used settings in expression mode. We recommend taking caution,
Page 22
22
and especially if you prefer to gradually increase vacuum intensity over a
pumping session, to turn the pump down low prior to turning it off.
Single Pumping
1. Connect the tubing to the
air nozzle on the front of the
pump motor.
2. Ensure that the cap is
secured over the unused air
nozzle (see right).
Tip: Make sure the cap is secured
firmly enough over the unused air
nozzle that no air can escape, but
not so firmly that it is difficult to
remove.
Double Pumping
1. Remove the cap from the second air nozzle.
2. Connect the tubing from
each milk collection kit into
an air nozzle (see below,
right).
Tip: Double pumping is more
effective for most women at building
milk supply, and is a great way to
save time. It is normal to notice that
suction reduces when double
pumping - just turn the vacuum
settings higher to compensate.
Tip: Hold one breast shield to your breast with your forearm and the other with
the hand of the same arm to keep one arm free while double pumping. If you are
expressing frequently, you may consider investing in a hands free pumping bra.
Page 23
23
Things to Remember
• Some women achieve success by swapping between Massage Mode
and Expression Mode throughout a pumping session. For example,
start in Massage Mode, and switch to Expression Mode when milk is
flowing, and then when the milk flow slows, switch back into
Massage Mode; and so on.
• After 30 minutes of operation, the Spectra S1 will automatically turn
off. This safeguards against depletion of battery life should the unit
be left on.
• The Spectra S1 automatically starts back up where you left off,
therefore we recommend slowly decreasing vacuum intensity at the
end of your pumping session (this eliminates any ‘surprises’ when you
go to pump the next time).
• You may experience greater vacuum intensity when single pumping
at the same level as while double pumping, so keep this in mind when
starting your pumping session.
Tips for Expressing Breast Milk
• Relax and stay hydrated: Set yourself up with a glass of water and
snacks, and minimise interruptions for the next 15-30 minutes as
much as possible.
• Set the stage: Have a regular pumping location. Choose a seat that is
comfortable and provides back support so you can relax while still
sitting up straight. Keeping a small towel nearby will help you clean
as needed.
• Routine and ritual: You can condition your body to express easily by
pumping with the same setup each time. For example, try always
using the bathroom first, then fix your favorite drink, grab your clean
milk collection kits, sit down in your regular spot, have your drink,
and then start pumping. Try always expressing after brushing your
teeth, or playing the same game on your phone while you express.
Your body will start to recognise what’s going on.
• Visualise success! Just as ritual can help contribute to effective
pumping, some creative visualisation can also help. Think of a gushing
faucet, a flowing river, or simply visualise your milk coming out.
Page 24
24
• Remember who you are pumping for: Some women find a picture of
their baby, a baby item or item of clothing that smells like their baby
can help trigger letdown. Some find that a recording of their baby’s
cry is a powerful letdown trigger.
• Massage to start: Stimulated your breasts before pumping can ease
letdown. Rub in small circles all around the breast (don’t forget in the
armpit area) on both sides before you turn your pump on.
• Massage to continue: When you notice your milkflow starting to
slow, massaging your breast while focussing on any areas that seem
to still contain milk can sometimes restart milkflow or encourage
another letdown.
• Pump more often: Increasing the frequency of your pumping
sessions rather than the amount of time you pump is generally more
effective at increasing the volume you can express.
• Pump on schedule: Pumping at the same time each day can help
teach your breasts to be ready to let the milk flow. Some women find
pumping in the morning brings about the biggest ‘payoff’ while other
pump after their baby’s bedtime, a much more relaxed time of day.
• Free a hand: With practice, you may be able to use a cushion or the
crook of your arm to support one milk collection kit while you hold
the other. This gives you a free hand to turn pages, scroll down
screens, or use the remote. If you are serious about getting things
done while pumping, a hands-free pumping bra will free up both your
hands.
• Pain should not be “pushed through”: If you are experiencing
discomfort or pain while pumping, turn the suction down, try a little
bit of lubricant such as coconut oil on the shield, and contact your
care provider or Spectra Customer Support ASAP if the pain
continues.
Note: When you express and how often will depend on your specific situation.
We have provided some basic instructions here, but you may wish to ask your
care provider for additional help. More information is also provided on our
website and through customer support. Contact us if you need assistance.
Spectra Baby Australia
www.spectra-baby.com.au
Page 25
25
Functions & Controls
Massage Mode & Expression Mode
The Spectra S1 comes equipped with Massage Mode and Expression Mode
to best mimic the patterns of your baby’s suckling. The Massage Mode is a
fast method of pumping designed to initiate your letdown, the start of milk
flow. Expression Mode mimics the slow, deep suckling of your baby once the
milk has begun flowing. To use these modes, follow the instructions below:
1. Press the button to turn on your Spectra S1.
2. Press the button to switch to Massage Mode. The screen will
display the icon.
3. Once your milk is flowing, press the button again to enter the
Expression Mode.
4. You may find good results switching between Massage Mode and
Expression Mode multiple times throughout the pumping session.
Page 26
26
Vacuum Intensity
The vacuum level on your breast pump refers to the suction strength, or how
strongly the pump will ‘suck’. This is measured in mmHg. When you are using
your Spectra S1, you will usually find that expressing is most effective on the
highest vacuum level that you are comfortable with. However, it’s important
not to set vacuum level so high that it makes you uncomfortable, as the
resulting pain will hinder your milk flow.
• Adjust the vacuum intensity by pressing the and buttons
between levels 1 and 12. Start off with the vacuum on low, and then
gradually increase the vacuum setting to your comfort level.
• To achieve best results, we recommend trying to pump with the
vacuum set to your maximum comfort level. You may try switching
between your maximum comfort level and a lower intensity to
stimulate more milk let down as well. Be sure not to pump above your
comfort level as that may hinder milk flow or cause injury.
• Since the Spectra S1 automatically starts back up where you left off,
we recommend slowly decreasing vacuum intensity at the end of
your pumping session (this eliminates any ‘surprises’ when you go to
pump the next time).
Page 27
27
Cycle Speed
The cycle speed on your Spectra S1 refers to the how many times the pump
‘sucks’ and releases per minute; this is measured in cpm (cycles per minute).
Your Spectra S1 has been designed with variable cycle settings so that you
can find the setting that suits your body best. Changing the cycle speed can
make a dramatic difference to successful expressing for some women. Every
woman is different, so experiment to find what speed works best for you.
• In Expression Mode, adjust the vacuum intensity by pressing the
and buttons between levels 38 and 54.
• In Massage Mode, the cpm is locked at 70.
Page 28
28
Night Light
The Spectra S1 comes with a nightlight to make pumping at night and on
dark days easier. The night light has two settings of brightness - simply press
the button to turn on the night light, and again to increase brightness. To
turn off the light, press the button again.
Battery Life
Battery Type: 1.11V 2000mAh Li-Polymer
The Spectra S1 comes with approximately 3 hours of battery life, enabling
you to pump on the go. The pump performs best when the battery is fully
charged. The S1 takes approximately 4 hours to charge. To prolong battery
health, we recommend reaching a full charge prior to unplugging the S1. You
can pump while the S1 is charging.
Page 29
29
Milk Storage
The following chart describes how and where to safely store your expressed
breast milk, based on current international recommendations. If your care
provider has provided alternative instructions, always adhere to those.
Preferred Storage
Duration
Acceptable Storage
Duration
Fresh Breast Milk
At room temperature (up
to 26°C / 78°F)
4 hours
8 hours
In the cooler bag with an
ice pack (up to 15°C /
59°F)
12 hours
24 hours
In the back of the
refrigerator (up to 4°C /
78°F)
3 days
8 days
Frozen Breast Milk Prior to Feeding
At room temperature (up
to 26°C / 78°F)
None - Should be
thawed in the
refrigerator
None - Should be
thawed in the
refrigerator
In the cooler bag with an
ice pack (up to 15°C /
59°F)
Until Thawed
Until Thawed
In the back of the
refrigerator (up to 4°C /
78°F)
24 hours
48 hours
Fresh Breastmilk after Feeding
At room temperature (up
to 26°C / 78°F)
1 hour
2 hours
Page 30
30
In the cooler bag with an
ice pack (up to 15°C /
59°F)
Up to 4 hours
Up to 4 hours
In the back of the
refrigerator (up to 4°C /
78°F)
Up to 24 hours
Up to 24 hours
In the freezer (-18-20°C
/ -4-0°F)
None - Should not be
frozen
None - Should not be
frozen
Previously Refrigerated or Frozen Breastmilk after Feeding
At room temperature (up
to 26°C / 78°F)
1 hour
1 hour
In the cooler bag with an
ice pack (up to 15°C /
59°F)
1 hour
2 hours
In the back of the
refrigerator (up to 4°C /
78°F)
1 hour
2 hours
In the freezer (-18-20°C
/ 0-4°F)
None - Do not refreeze
None - Do not Refreeze
In the Freezer
In the Freezer
Compartment of a
Refrigerator (-15°C /
5°F)
1 week
2 weeks
Conventional freeze (18-20°C / -4-0°F)
3 months
6 months
Deep Freeze (-20°C / 4°F or lower)
6 months
1 year
Note: The bottles, sealing discs, and bottlenecks that come with your milk
collection kit are safe for storage use in the refrigerator or freezer; they need
Page 31
31
to be sterilised before first use. Spectra milk storage bags which come presterilised are available to purchase on the Spectra Baby Australia website.
Important Safeguards
• Do not refreeze previously frozen breast milk once thawed.
• Do not overheat or microwave breast milk as much of its nutritive
value will be lost and hot spots can occur and result in serious burns.
• Do not use bottle warmers to heat breast milk.
Thawing Frozen Breast Milk
There are three ways to thaw frozen breast milk safely. If your caregiver has
given you alternative instructions, always adhere to those. Choose one the
following methods:
• Move it to the back of the refrigerator 24 hours prior to feeding.
• Hold the bottle or bag under warm running water until the milk is
thawed and reaches room temperature.
• Place in a bowl of very warm water and gently move around in the
bowl until thawed, refreshing the warm water as it cools.
Note: Breast milk is still considered frozen as long as it contains any amount of
ice particulates.
Page 32
32
Feeding Breastmilk
We recommend waiting until breastfeeding is well established prior to
feeding your baby expressed breastmilk. Always follow the advice of your
care provider.
Warming Milk
Some babies prefer warm milk. To warm the milk, set bottle in a mug of hot
tap water for several minutes. Gently shake the bottle periodically. Test the
temperature on the inside of your wrist prior to feeding it to your baby.
• Do not heat milk in a microwave. Microwaving can cause severe
burns from hot spots that develop in the milk during the heating
process.
• Do not heat in boiling water or water that is too hot to touch.
• Do not reheat milk above body temperature as it can negatively
impact the nutritional components of the milk.
• Do not reheat milk in a bottle warmer as it can negatively impact the
nutritional components of the milk. Bottle warmers are typically
designed for formula, which is not as susceptible to heat damage.
Safely Bottle-Feed
To ensure safe use of the bottles, adhere to the following guidelines:
• Always inspect the bottle, nipple and other feeding accessories for
defects prior to feeding your baby. If the nipple appears cracked or
torn, discontinue use and discard immediately.
• Always supervise infants when bottle feeding.
• Periodically test the nipple by tugging on it to prevent potential
choking hazards.
• Do not modify the nipple or bottle components.
• Do not use nipple or bottle components for anything other than their
intended purpose, i.e. as for pacifiers, teething surfaces, or toys.
Page 33
33
Bottle Assembly
The following instructions describe how to prepare the Spectra bottles for
feeding:
1. First wash your hands in warm soapy water before touching parts
that come in contact with milk.
2. Then, insert the teat by firmly pressing it from the underside and up
into the bottle neck (where the sealing disc would go).
3. Screw the neck firmly onto the collection bottle.
4. When not in use, place the bottle cap over the teat to keep it clean.
Tip: To avoid leaking, always transport and store the bottle in the upright
position, and when possible store with the sealing disc in place instead of
the teat.
Page 34
34
Troubleshooting
The following section contains common issues and resolutions. Should
your issue not be resolved by following the contents of the following
section, please contact our customer support team.
POSSIBLE PROBLEM
SOLUTION
Pump will Not Turn On
Out of battery power.
Insert power adapter.
Interchangeable parts on power
adapter not connected
properly.
Assemble adapter as per instructions
on page 19.
Pump Will Not Turn on And a Loose Rattling Sound is Heard
Internal circuit board has come
loose.
Contact customer service.
No Suction
Tubing has been disconnected.
Firmly attach tubing to both the
backflow protector and the pump
nozzle.
Backflow protectors are not
assembled correctly.
Reassemble and reattach the
backflow protectors.
Silicone valve is not attached
correctly.
Reposition the valve and then
reassemble.
Low Suction
Vacuum setting has been
accidentally changed.
Adjust vacuum settings.
Battery is low.
Insert power adapter.
Page 35
35
POSSIBLE PROBLEM
SOLUTION
Low Suction (cont.)
Silicone valve is not attached
correctly.
Reposition the valve and then
reassemble.
Backflow protectors are not
assembled correctly.
Reassemble and reattach the
backflow protectors.
Tubing is not fully attached.
Firmly attach tubing to both the
backflow protector and the pump
nozzle.
If single pumping, nozzle cover
is loose.
Ensure the second pump nozzle is
fully covered by the rubber cap.
Air is leaking out between
breast and the breast shield.
Adjust breast. If persists, breast
shield may be the wrong size.
Valves and backflow protector
may need replacing.
Over time the elasticity of these
parts degrade which impacts
suction. Replace regularly.
Page 36
36
Warranty
This product is warrantied by the manufacturer and its authorised
representatives to be free from defects in material and workmanship for a
period of two years from date of purchase. This warranty does not cover
damage caused by accident, misuse, abuse, improper maintenance,
unauthorised modification, or connection to an improper power supply.
If you need assistance with correct usage, care or warranty when using this
product please contact:
Spectra Baby Australia
www.spectra-baby.com.au
Disposal
Spectra Baby Australia encourages used pumps, including broken pumps, to
be returned to us so we can prepare them for donation or repair them for
use again. Please contact us for more information on this program.
The Spectra S1 must not be disposed of with your regular household waste.
It must be taken to a designated electronics recycling location. For more
information about where you can dispose of electronic waste, please contact
your local authority.
Breastshields and the clear plastic pieces of the backflow protectors can be
recycled in your normal household recycling service after proper
sterilisation.
In order to comply with EU Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE) please adhere to the
following: This product may contain material which could be
hazardous to human health and the environment. DO NOT DISPOSE of this
product as unsorted municipal waste. This product needs to be RECYCLED
in accordance with local regulations, contact your local authorities for more
information.
Page 37
37
Flying with the Spectra S1
The Spectra S1 is safe for use while travelling on commercial airlines. The
Spectra S1 battery has 24Wh, and is categorized with cell phones and
personal computers. You do not need to declare the S1 prior to flying.
However, per CASA regulations the S1 must not be in checked luggage.
When travelling by air, bring the S1 in your carry-on luggage. If you have
more questions, contact your airline.
For More Information
If you need assistance with correct usage, care or warranty when using this
product, please contact:
Spectra Baby Australia
www.spectra-baby.com.au
Instructional Videos
Spectra Baby Australia has produced a series of videos to assist with using
your Spectra breast pump. Topics include assembly, cleaning & sterilising,
warranty information and more. You can subscribe to our YouTube Channel
and browse our range of videos here:
→ https://www.youtube.com/spectrababyaustraliainfo
Page 38
38
Technical Specifications
Vacuum Strength: 320mmHg (12 steps in Expression Mode, 5 steps in
Massage Mode)
Grade: Hospital Grade
Massage Mode: Yes
Cycle Speed (Expression Mode): 5 Speed Settings Between 38 and 54 rpm
Cycle Speed (Massage Mode): 70 rpm
Power: Mains or Battery
Battery Type: 1.11V 2000mAh Li-Polymer
Battery Life: 3 hours
Watt Hours: 24Wh
Time to Charge: 4 hours
Double Pump: Yes
Weight: 2kg
Warranty: 2 Years
Motor Life: 1500 Hours
Country of Origin: South Korea
Certifications: CE, FDA, ISO13485, ISO9001
Environmental Conditions
Operating Temperature: 5°C - 40°C
Operating Humidity: 15% - 93% non-condensing
Storage Temperature: –20°C - 60°C
Storage Humidity: 15% - 93% non-condensing
Performance Characteristics
Vacuum Strength
Massage Mode
1 2 3 4 5
Expression Mode
1 2 3 4 5 6 7 8 9
10
11
12
Page 39
39
Cycle Speed (cycles per minute)
Massage Mode
70
Expression Mode
54
50
46
42
38
Electromagnetic Compatibility
Portable and mobile RF communications such (i.e. mobile phones, walkie
talkies, wireless devices) can impact the functionality of the Spectra S1. We
recommend keeping these devices 1 meter away from the Spectra S1 while
in operation. Do not use adjacent or stacked with any other electronic
equipment.
IEC 60601-1-2:2007
This Spectra S1 has been tested and found to comply with the limits for
medical devices in IEC 60601-1-2:2007. These limits are designed to provide
reasonable protection against harmful interference in a typical medical
installation. This equipment generates, uses and can radiate radio frequency
energy and may cause interference to other devices in the vicinity.
Interference can be determined by turning the equipment on and back off
again. Interference can be remedied by ensuring the Spectra S1 is at least 1
meter away from other radio emitting devices, by reorienting the pump, or
by connecting the pump to an electrical outlet not shared by other devices.
Page 40
40
Copyright 2017 Spectra Baby Australia
Loading...