Quick Star t Guide
O4DT7
Warning and Caution
1
■ If the p rod uct d oes not work properly, plea se conta ct your
dealer or the nearest service center. Never attempt to disassemble
the camera yourself. Any unauthorized changes or modifications
could void the warranty.
■ Do not allow water or liquid intrusion into the camera.
■ All installation and operation here should conform to local
electrical safety codes. Make sure the device is firmly installed
on the wall or ceiling.
■ Do not use camera beyond specified voltage range.
■ Do not drop the camera or subject it to physical shock.
■ Avoid touching the camera lens.
■ If cleaning is necessary, please use cleaning cloth to wipe it
gently.
■ Do not aim the c amera at the sun or e xtrem ely brig ht light
sources.
■ Do not place the camera in extremely hot or cold environments
and d u sty a n d damp l ocati o n s. Do n ot ex p ose it to hi g h ly
electromagnetic radiation.
■ Do not block any ventilations.
Package
2
Camera
Quick start guide
Tapp ing scr ews × 3
CD
Screwdriver
Overview
Overview
3
3
4
5
6
Drill template
Junction box
1
2
3
7
8
Plastic plug ×3
1
Ether net connec tor
2
Audio i nput conne ctor
Power c onnector
3
Mount ing base
4
5
Fixed s crew
6
Micro phone
7
Micro S D card slot
Reset
8
p
y Ca
it
r
cu
e
S
DC12V
* 1 It is recom mend ed to install th e secur ity cap for outd oor installations.
* 2 DC 12V pow er su ppl y is no t require d if a Po E swi tch o r injector is us ed to p owe r
the camera.
► Connecting Network Cable
1
2
3
① Loosen th e nut from th e main element.
② Run the net work cabl e (without RJ 45 connector) through both
element s. Then crimp the cable with RJ 45 connector.
③ Connect t he cable to the hermetic connector. Then tighte n the nut
and the mai n cover.
Installation
4
* Befor e you start, p lease make s ure tha t the w all or ce iling is str ong enough
to with stand thre e times the we ight of t he ca mera an d the juncti on box.
① Open the mo unting ba se and the upper cover of the junction box.
Mount ing base
Upper c over
② Install j unction b ox onto the wall by using the screws provided.
③ Loosen th e fixed scr ew to disas semble the camera. Then remove
the cover f rom the dom e to insert the SD card. After tha t, instal l the
cover bac k to the dome a nd fix it firmly with the screws. (Note that
the cover s hould not b e installed unevenly .)
Fixed S cre w
Mount ing B ase
Enclo sur e
Dome
Cover
④ Fasten th e camera on to the junction box.
⑤ Route the c ables thr ough the cable hole and connect the cables.
Then rein stall the u pper cover onto the junction box.
⑥
Adjust th e camera to o btain an optimum angle. Before adjustment,
preview t he image of t he camera on a monitor. After tha t, tighte n the
fixed scr ew to finis h the insta llation.
Fixed s crew
Web Operation and Login
5
IP Scanner can search for the devi ce on the local network.
● Operation
① Make sure that the camera and the PC are connected to the same
local network. The camera is set to DHCP by default.
② Install IP Scanner from the CD and r un it after installation.
③ In the device list, you can view the IP address, model number, and
MAC addre ss of each de vice. Sel ect the applicable device and double
click to open up the web viewer. You can also manually enter t he IP
address i n the addre ss bar of the w eb browse r.
The login i nterfac e is shown above. Default user name is admin a nd
passw ord is 1234. Afte r l ogg ing in , f oll ow dir ect io ns t o in stall
applica ble plugi ns.
Loading...