Spalding 89226CA User Manual

1
11/06 ID# M890021
IMPORTANT!
To ensure prompt and correct handling of any problems, or to answer any questions, please
contact the Sample and Display Technician at 1-800-558-5234.
Display System
Owners Manual
Customer Service Center
Model
89226CA
7/16"
REQUIRED TOOLS AND MATERIALS:
• 2 Capable Adults
• 2 Stepladders
• Phillips Screwdriver
• (2 each) Wrenches and/or Socket Wrenches and Sockets.
1/2" 9/16"
7/16" 1/2" 9/16"
AND/OR
READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT.
FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY.
WARNING!
© COPYRIGHT 2006 by SPALDING
ID# M890021 11/06
2
IMPORTANT!
Remove all contents from boxes.
Be sure to check inside pole sections;
hardware and additional parts are packed inside.
SAFETY INSTRUCTIONS
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY
RESULT IN SERIOUS INJURY,
PROPERTY DAMAGE AND WILL VOID WARRANTY.
This unit is intended for display purposes only and
should not be used for play.
To ensure safety, do not attempt to assemble this system without following the instructions carefully. Check entire box and inside all packing material for parts. Before beginning assembly, read the instructions and identify parts in this document. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this system is not installed, maintained, and operated properly.
• During assembly, if using a ladder use extreme caution. Two capable adults are recommended for this operation.
• If technical assistance is required, contact the Sample and Display Technician.
• Serious injury could occur if teeth/face come in contact with backboard, net or rim.
• Display recommended for 2-3/4”” ( cm) or 3-1/2” (9 cm) Round or 4” (10 cm) Square poles only.
• All instructions and warnings MUST accompany any display item that is sold.
Most injuries are caused by misuse and/or not following
instructions. Use caution when installing this unit.
3
11/06 ID# M890021
PARTS LIST (See Hardware Identifier)
Item #17 (2)
HARDWARE IDENTIFIER (Nuts, Washers & Springs)
Item #9 (8)
Item #11 (10)
Item Qty. Part No. Description
1 2 200318 Bracket, Reinforcement S/J 2 2 203223 Bolt, Carriage, 5/16-18 x 1" 3 2 908379 Board Bracket 4 2 200533 Spacer, Mounting 5 2 990062 Pole, 3.5" 6 1 908378 Rim 7 8 201611 Bolt,Hex-Flange, 5/16-18 x 3" 8 4 205544 Bolt, 5/16-18 x 1.25"
9 8 203063 Lock Nut, 3/8-16 Nylon Insert 10 2 912006 Extension Arm 11 10 203100 Nut, Hex-Flange 5/16-18 Whiz Lock 12 3 206987 Wedge 13 4 203294 Bolt, U, Round, 3/8-16 x 3.5" 14 4 203309 Washer
Item Qty. Part No. Description
15 2 203470 Washer, Flat, S/J 16 2 203472 Spring 17 2 203795 Nut, 3/8-16 Special S/J 18 2 203796 T-bolt, 3/8-16 x 5" 19 3 203798 Bolt, Hex 5/16-18 x 1.5" 20 3 204290 Net 21 2 Rim 22 2 207103 Pole Cap, 3.5" 23 2 900033 Bracket, S/J 24 1 FR908359 Pole, 2.75" 25 1 909271FR Board, 44" Rectangular, Ball on Court 26 1 919246FR Board, 44", Traditional NBA, Brown 27 1 979281FR Board, 50" Polycarbonate, Blue
Item #7 (8)
Item #18 (2)
Item #16 (2)
Item #15 (2)
Item #14 (4)
Item #19 (3)
Item #2 (2)
Item #8 (4)
HARDWARE IDENTIFIER (Bolts and Screws)
ID# M890021 11/06
4
Install display boards in the marked locations. Each mounting location consists of a mounting pole stub with the following dimensions: Height = 8”, O.D. = 3 3/8”, I.D. = 3 1/8” (arrows indicate direction the board is facing).
Display boards will be mounted as follows:
Corner Location 1: 66281CA
50” Polycarbonate Backboard
Blue Graphic
Black Slam Jam Rim
Use extension arm for assembly
Corner Location 2: 77271CA
44” Rectangle Recycled Board
Basketball on Court Graphic
Black Slam Jam Goal
Use extension arm for assembly
Corner Location 3: 65246CA
44” Trapezoidal Recycled Board
Evolution Logo
Black Standard Goal
Gooseneck Pole System
Corner Location 4: Open - No Board
66281CA
3-1/2"
Open - No Board
3-1/2"
77271CA
3-1/2"
65246CA
3"
4
CORNERCORNER
3
CORNERCORNER
1
2
Loading...
+ 7 hidden pages