SY-6IEM
FC
Hardware
Installation
Quick BIOS
Introduction
Onboard Sound
Driver Installation
The SOYO CD
Mainboard
Quick Start Guide
Setup
Tested To Comply
C
With FCC Standards
FOR HOME OR OFFICE USE
POST CONSUMER
100%
RECYCLED PAPER
SOYO™
2
SY-6IEM Mainboard
Pentium® II & Celeron™ processors
82440 EX/LX AGP/PCI Mainboard
66MHz Front Side Bus supported
Micro-ATX Form Factor
Copyright © 1998 by Soyo Computer Inc.
Trademarks:
Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their
owners.
Product Rights:
Product and corporate names mentioned in this publication are used for identification purposes
only and may be registered trademarks or copyrights of their respective companies.
Copyright Notice:
All rights reserved. This manual is copyrighted by Soyo Computer Inc. You may not reproduce,
transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of
this publication without express written permission of Soyo Computer Inc.
Disclaimer:
Soyo Computer Inc. makes no representations or warranties regarding the contents of this
manual. We reserve the right to revise the manual or make changes in the specifications of the
product described within it at any time without notice and without obligation to notify any
person of such revision or change. The information contained in this manual is provided for
general use by our customers. Our customers should be aware that the personal computer field is
the subject of many patents. Our customers should ensure that their use of our products does not
infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid patent rights
of third parties and not to infringe upon or assist others to infringe upon such rights.
Restricted Rights Legend:
Use, duplication, or disclosure by the Government is subject to restrictions set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
252.277-7013.
About This Guide:
This Quick Start Guide is for assisting system manufacturers and end users in setting up and
installing the mainboard. Information in this guide has been carefully checked for reliability;
however, no guarantee is given as to the correctness of the contents. The information in this
document is subject to change without notice.
If you need any further information, please visit our Web Site on the Internet. The address is
"http://www.soyo.com.tw".
6IEM Serial - Version 1.0 - Edition: August 1998
* These specifications are subject to change without notice
3
Introduction
11
Introduction
SY-6IEM
Quick Start Guide
Congratulations on your purchase of the
describes the steps for installing and setting up your new mainboard.
This guide is designed for all users to provide the basic steps of mainboard setting and
operation. For further information, please refer to SY-6IEM Mainboard User's Guide and
Technical Reference online manual included on the CD-ROM packed with your mainboard.
SY-6IEM
Mainboard. This Quick Start Guide
Unpacking
* If your board comes with a driver disc and a paper manual, the Quick Start Guide and the CD-ROM are not included in the package.
When unpacking the mainboard, check for the following items:
u
The SY-6IEM 82440 EX/LX AGP/PCI Mainboard
u
This Quick Start Guide
u
The Installation CD-ROM
u
The CPU Retention Set
u
One IDE Device Flat Cable
u
One Floppy Disk Drive Flat Cable
SY-6IEM
4
Introduction
COM 1
PRT
USB 1
USB 2
Connector
Connector
1
Flash BIOS
1
1
1
_
_
+
_
_
PS/2 KB
COM 2
Quick Start Guide
SY-6IEM Mainboard Layout
PS/2 Mouse
3
JP1
1
Slot 1 for
Pentium® II Processor
DIMM 1 DIMM 2
®
Intel
82443 EX/LX
ATX
Power
FDC
HDD LED
Turbo
LED
PWRBT
1
Reset
LINE-OUT
LINE-IN
MIC JACK
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
JOYSTICK
PCI Slot #2
ISA Slot #1
ISA Slot #2
Supports Intel Pentium® II
processors (233-333MHz) &
Celeron™ processors (266-366MHz)
Easy CPU settings in BIOS with the
“SOYO COMBO Setup”.
3D PnP audio onboard
Auto-detect CPU voltage
PC97, APM, ACPI, Ultra DMA/33
Power-on by modem or alarm
Supports Wake-On-LAN (WOL)
Supports Power-On by PS/2 Keyboard
Ultra
I/O Chipset
5
IR
CD-IN
4
JP44
4
1 3
AGP Slot
JP2
1 3
SB-LINK™
(PC-PCI)
ESS
ES1898
®
1
J2 J3
Key Features
Ø
Supports Creative SB-LINK™ (PC-PCI)
for PCI audio card
Ø
1 x 32-bit AGP slot
Ø
2 x 32-bit bus mastering PCI slots
Ø
2 x USB ports
Ø
1 x IrDA port
Ø
Supports multiple-boot function
Ø
DMI utility
Ø
ATX power connector
CPUFAN
PCI Slot #1
Intel
82371 EB
CHAFAN
1
1
IDE 2
IDE 1
3V
Lithium
Battery
CMOS Clear
Jumper
3
JP5
®
1
SY-6IEM
5
Hardware
Installation
22
l
l
l
Follow the directions in this section designed to guide you through a quick and correct
installation of your new
6IEM Mainboard User's Guide and Technical Reference online manual included on the CDROM packed with your mainboard.
Installation
To avoid damage to your mainboard, follow these simple rules while
handling this equipment:
Before handling the mainboard, ground yourself by grasping an unpainted portion of
the system's metal chassis.
Remove the mainboard from its anti-static packaging. Hold it by the edges and avoid
touching its components.
Check the mainboard for damage. If any chip appears loose, press carefully to seat it
firmly in its socket.
SY-6IEM
Mainboard. For detailed information, please refer to SY-
Quick Start Guide
PREPARATIONS
Gather and prepare all the necessary hardware equipment to complete the installation
successfully:
u
Pentium® II processor with built-in CPU cooling fan (boxed type)
u
SDRAM module
u
Computer case and chassis with adequate power supply unit
u
Monitor
u
PS/2 Keyboard
u
Pointing Device (PS/2 Mouse)
u
VGA Card
u
Speaker(s) (optional)
u
Disk Drives: HDD, CD-ROM, Floppy drive…
u
External Peripherals: Printer, Plotter, and Modem (optional)
u
Internal Peripherals: Modem and LAN cards (optional)
Notice 1:
need to install a sound card.
Notice 2:
sure to use an "amplified speaker" that can generate proper output sound volume.
This mainboard features three built-in audio-stereo ports. Therefore you do not
If you want to use an external speaker connected to "Line-out" port, please make
SY-6IEM
6
Hardware
Installation
Quick Start Guide
Install the Mainboard
Follow the steps below in order to perform the installation of your new
Step 1. Install the CPU
SY-6IEM
Mainboard.
Mark your CPU Frequency:
Record the working frequency of your CPU that
should be clearly marked on the CPU cover or write your own combination in the space provided.
233MHz (66 x 3.5) 300MHz (66 x 4.5) 366MHz (66 x 5.5)
266MHz (66 x 4.0) 333MHz (66 x 5.0) MHz ( x )
CPU Mount Procedure:
To mount the Pentium® II processor that you have
purchased separately, follow these instructions.
1 Unpack the Retention Kit 2 Position the Mainboard 3 Insert the Screws
Supporting Base
Support Clip
Latches (x2)
Screws (x2)
Retention Clip
CPUFAN Power
Slot 1
Heat Sink
ATX Power
5 Install the Retention Clip 6 Install the CPU
4 Install the Supporting Base
Larger Pin-hole
7 Install the Support Clip 8 Insert the Latches 9
Remember to connect the
CPU Cooling Fan to the
CPUFAN power connector
on the mainboard.
Loading...